CWI, QA/QC
NDT.org Member Since: 2006
Added: 7/24/2006
Last Updated: 7/24/2006
Last Updated: 7/24/2006
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
LA Louisiana
Country:
United States
Status:
I am willing to Travel.
I am on a job and will finish soon.
Currently working but always looking.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.
I am on a job and will finish soon.
Currently working but always looking.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.
Certifications
AWS/CWI
ASNT Level II MT, PT, UTT
ASNT Level II MT, PT, UTT
Education
American Welding Society 2006 Cert# 06020811, valid to Feb. 2009
Port Barre High School 1992-1995
Krautkramer UT Level I & II 1997
MPT Services MT Level I & II 1997
MPT Services PT Level I & II 1997
MPT Services VT Level I & II 1998
Port Barre High School 1992-1995
Krautkramer UT Level I & II 1997
MPT Services MT Level I & II 1997
MPT Services PT Level I & II 1997
MPT Services VT Level I & II 1998
Experience
2008 TO PRESENT Suez Energy, Boston, MA
QA/QC Lead Inspector. Responsible for overseeing a team of inspectors performing visual inspection of 24” weight coated pipe prior to load out. This included dimensional checks, and coating checks on the CWC & FBE. Also included reviewing quality plans, procedures, ITPs and engineering drawings.
2007- PRESENT MCS, Houston, TX.
QA/QC Lead Inspector. Responsible for third party inspection of various oilfield tools and equipment including but not limited to assembly/ fabrication of down hole tools, vacuum insulated tubing, torque of connections, hydrostatic and gas testing, monitoring inspection activities and reports, communicating with end-user on discrepancies, reviewing material test reports, certificates of conformance, performing dimensional checks, issuing inspection releases, coordinating with suppliers and inspectors, review of project specifications and industry standards, communicating , load out as well as setout inspections, material traceability, dimensional inspection, scheduling of inspections, customer support, daily reports, safety, and logging of hours for travel and down time.
2006-2007 MCS, Houston, TX.
QA/QC Horizon Marine Construction WAG-P Project Quality Manager. Responsible for coordination of daily inspection for welding of line pipe for the West African Gas Pipeline Company pipeline project. Daily responsibilities include writing inspection test plans, compiling work packages, supervising a team of multi-national inspectors, interacting with client representatives, providing QA/QC support to construction personnel, reviewing material test certificates for compliance to project specifications, and witnessing hydrotest of large diameter pipeline.
2006 Swain & Associates, Houston, TX.
QA/QC Lead Inspector. Responsible for third party inspection of various oilfield tools and equipment including but not limited to assembly of down hole tools, torque of connections, hydrostatic and gas testing, monitoring inspection activities and reports, communicating with end-user on discrepancies, reviewing material test reports, certificates of conformance, performing dimensional checks, issuing inspection releases, coordinating with suppliers and inspectors, review of project specifications and industry standards, communicating , load out as well as setout inspections, material traceability, dimensional inspection, scheduling of inspections, customer support, daily reports, safety, and logging of hours for travel and down time.
PAGE TWO
EXPERIENCE - Continued...
2005-2006 Willbros West Africa, Nigeria
QA/QC Supervisor- Material Controller. Responsible for coordination of daily inspection for welding of structural and process piping and offshore production platforms for Exxon Mobil EPC4-A project. Daily responsibilities include compiling work packages, supervising a team of multi-national inspectors, interacting with client representatives, providing QA/QC support to construction personnel, reviewing material test certificates for compliance to project specifications.
2004-2005 MCS, Houston, TX.
QA/QC Lead Inspector- Material Controller. Responsible for third party inspection of various oilfield tools and equipment including but not limited to assembly of down hole tools, torque of connections, hydrostatic and gas testing, monitoring inspection activities and reports, communicating with end-user on discrepancies, reviewing material test reports, certificates of conformance, performing dimensional checks, issuing inspection releases, coordinating with suppliers and inspectors, review of project specifications and industry standards, communicating , load out as well as setout inspections, material traceability, dimensional inspection, scheduling of inspections, customer support, daily reports, safety, and logging of hours for travel and down time.
2003-2004 Quality Inspection Services
NDT- QA/QC Lead Inspector. Responsible for running an inspection team that traveled throughout the U.S. performing inspections for GE Rail Systems. This included Visual, Dye Penetrant & Dimensional Inspection of cast rail car parts. Performed Job activities included, but were not limited to, scheduling of inspections, customer support, daily reports, safety and logging of hours/ travel and down time
1998- 2003 Conam Inspection/MQS Inspection
NDT- QA/QC Contract - Lead Inspector. Responsible for the inspection of Power Plants, Refineries, Chemical Plants and Paper Mills including; Boiler, Piping, Turbine and Vessel inspection. Performed welding inspection, NDT & Visual inspection using ISO drawings and P&ID’s. Performed dimensional inspection off of cut sheets, weld lay out from job packs and documented changes on As Built Drawing. Also involved in plant outages, up-grades, un-scheduled repairs and vendor surveillance. Performed & assisted in the inspection and monitoring of corrosion/erosion, stress & fatigue and assessment of failed equipment.
2000-2003 Lowery Inspection
NDT Inspector/API Assistant. Responsible for the inspection of all types of refinery equipment and NDE Inspections during turnarounds. Also assisted API Inspectors with routine and turnaround inspections.
PAGE THREE
EXPERIENCE - Continued...
2000-2001 Shaw Constructors
NDT Inspector/API Assistant. Responsible for the NDE Inspections during turnarounds. Also drew field isometrics drawing for piping and collected base line data.
Assisted API Inspectors with routine inspections of pressure vessels, storage tanks, and process piping.
1998 ITI, ANTI-CORROSSION
NDT- QA/QC Inspector. Responsible for third party inspection of ERW pipe including but not limited to visual inspection, ultrasonic testing and radiography.
1997 STUPP PIPE CORPORATION
NDT- QA/QC Inspector. Performed inspection on ERW pipe. Responsibilities included but not limited to final visual inspection and ultrasonic testing.
QA/QC Lead Inspector. Responsible for overseeing a team of inspectors performing visual inspection of 24” weight coated pipe prior to load out. This included dimensional checks, and coating checks on the CWC & FBE. Also included reviewing quality plans, procedures, ITPs and engineering drawings.
2007- PRESENT MCS, Houston, TX.
QA/QC Lead Inspector. Responsible for third party inspection of various oilfield tools and equipment including but not limited to assembly/ fabrication of down hole tools, vacuum insulated tubing, torque of connections, hydrostatic and gas testing, monitoring inspection activities and reports, communicating with end-user on discrepancies, reviewing material test reports, certificates of conformance, performing dimensional checks, issuing inspection releases, coordinating with suppliers and inspectors, review of project specifications and industry standards, communicating , load out as well as setout inspections, material traceability, dimensional inspection, scheduling of inspections, customer support, daily reports, safety, and logging of hours for travel and down time.
2006-2007 MCS, Houston, TX.
QA/QC Horizon Marine Construction WAG-P Project Quality Manager. Responsible for coordination of daily inspection for welding of line pipe for the West African Gas Pipeline Company pipeline project. Daily responsibilities include writing inspection test plans, compiling work packages, supervising a team of multi-national inspectors, interacting with client representatives, providing QA/QC support to construction personnel, reviewing material test certificates for compliance to project specifications, and witnessing hydrotest of large diameter pipeline.
2006 Swain & Associates, Houston, TX.
QA/QC Lead Inspector. Responsible for third party inspection of various oilfield tools and equipment including but not limited to assembly of down hole tools, torque of connections, hydrostatic and gas testing, monitoring inspection activities and reports, communicating with end-user on discrepancies, reviewing material test reports, certificates of conformance, performing dimensional checks, issuing inspection releases, coordinating with suppliers and inspectors, review of project specifications and industry standards, communicating , load out as well as setout inspections, material traceability, dimensional inspection, scheduling of inspections, customer support, daily reports, safety, and logging of hours for travel and down time.
PAGE TWO
EXPERIENCE - Continued...
2005-2006 Willbros West Africa, Nigeria
QA/QC Supervisor- Material Controller. Responsible for coordination of daily inspection for welding of structural and process piping and offshore production platforms for Exxon Mobil EPC4-A project. Daily responsibilities include compiling work packages, supervising a team of multi-national inspectors, interacting with client representatives, providing QA/QC support to construction personnel, reviewing material test certificates for compliance to project specifications.
2004-2005 MCS, Houston, TX.
QA/QC Lead Inspector- Material Controller. Responsible for third party inspection of various oilfield tools and equipment including but not limited to assembly of down hole tools, torque of connections, hydrostatic and gas testing, monitoring inspection activities and reports, communicating with end-user on discrepancies, reviewing material test reports, certificates of conformance, performing dimensional checks, issuing inspection releases, coordinating with suppliers and inspectors, review of project specifications and industry standards, communicating , load out as well as setout inspections, material traceability, dimensional inspection, scheduling of inspections, customer support, daily reports, safety, and logging of hours for travel and down time.
2003-2004 Quality Inspection Services
NDT- QA/QC Lead Inspector. Responsible for running an inspection team that traveled throughout the U.S. performing inspections for GE Rail Systems. This included Visual, Dye Penetrant & Dimensional Inspection of cast rail car parts. Performed Job activities included, but were not limited to, scheduling of inspections, customer support, daily reports, safety and logging of hours/ travel and down time
1998- 2003 Conam Inspection/MQS Inspection
NDT- QA/QC Contract - Lead Inspector. Responsible for the inspection of Power Plants, Refineries, Chemical Plants and Paper Mills including; Boiler, Piping, Turbine and Vessel inspection. Performed welding inspection, NDT & Visual inspection using ISO drawings and P&ID’s. Performed dimensional inspection off of cut sheets, weld lay out from job packs and documented changes on As Built Drawing. Also involved in plant outages, up-grades, un-scheduled repairs and vendor surveillance. Performed & assisted in the inspection and monitoring of corrosion/erosion, stress & fatigue and assessment of failed equipment.
2000-2003 Lowery Inspection
NDT Inspector/API Assistant. Responsible for the inspection of all types of refinery equipment and NDE Inspections during turnarounds. Also assisted API Inspectors with routine and turnaround inspections.
PAGE THREE
EXPERIENCE - Continued...
2000-2001 Shaw Constructors
NDT Inspector/API Assistant. Responsible for the NDE Inspections during turnarounds. Also drew field isometrics drawing for piping and collected base line data.
Assisted API Inspectors with routine inspections of pressure vessels, storage tanks, and process piping.
1998 ITI, ANTI-CORROSSION
NDT- QA/QC Inspector. Responsible for third party inspection of ERW pipe including but not limited to visual inspection, ultrasonic testing and radiography.
1997 STUPP PIPE CORPORATION
NDT- QA/QC Inspector. Performed inspection on ERW pipe. Responsibilities included but not limited to final visual inspection and ultrasonic testing.
