Certified Inspector QA/QC/Welding/Piping/Mech/Coating

Pakistan

I am willing to Travel.
I am willing to work overseas.
I prefer permanent jobs.

PROFESSIONAL CERTIFICATION

Certified A. Welding Inspector from American Welding Society (Certificate No. 00041184) Valid Thru July 2007.

Certified Internal Quality Auditor.

PROFESSIONAL QUALIFICATION

3 years Associate Degree / D.A.E. (Mech.) Diploma of Associate Engineer in Mechanical
Engineering Technology, from Government College of Technology, Karachi registered with Sindh
Board of Technical Education, Karachi, securing 72.23% of marks in First Division in 1989.

EDUCATIONAL QUALIFICATION

Higher Secondary School Certificate Examination in Science (Pre-Engineering) Group, from D.J.
Sindh Government Science College, Karachi, affiliated with Board of Intermediate Education, Karachi
securing 57.0% of marks in 1984.

PROFESSIONAL TRAINING COURSE / WORKSHOP / SEMINAR

* Attended public training course on “Internal Quality Auditing (ISO 9001 : 2000)” under the aegis
of RWTUV at National Inspection & Technical Testing Co., Ltd., Jeddah, during 20-21 September,
2005.

* Attended inhouse “Quality Management System for Capital Projects” training & workshop
Course under the aegis of RWTUV at Industrial Training Centre, ARAMCO, Riyadh, on March 8th &
9th, 2005.

* Attended inhouse “RTFI (Radiographic Testing Film Interpretation) II Qualification &
Evaluation” Course at Inspection Training Centre, ARAMCO, Dhahran, from July 31st to Aug., 04 th,
2004.

* Attended inhouse “Maintenance Inspection of Existing Coating” Course at Inspection Training
Centre, ARAMCO, Dhahran, from June 27 th to 28 th, 2004.

* Attended inhouse “Inspection of Intermediate & Topcoat Coating” Course at Inspection Training
Centre, ARAMCO, Dhahran, from June 19 th to 23 rd, 2004.

* Attended inhouse “Inspection of Primer Coating” Course at Inspection Training Centre, ARAMCO,
Dhahran, from June 12 th to 16 th, 2004.

* Attended inhouse “Inspection of Newly Applied Coating” Course at Inspection Training Centre,
ARAMCO, Dhahran, from June 5 th to 8 th, 2004.

* Attended inhouse “Inspection of Surface Condition Prior to Coating” Course at Inspection
Training Centre, ARAMCO, Dhahran, from May 29 th to June 1st, 2004.

* Attended inhouse “Introduction to Coating Inspection” Course at Inspection Training Centre,
ARAMCO, Dhahran, from May 22 th to May 25th, 2004.

* Attended the “Jotun” Corporate Training Programme in Theoretical Paint School, Chemistry &
Inspection held on 13th of January, 2004 at SAS Radison, Yanbu.

* Attended seminar on ISO 9001: 2000 Business Process Mapping hosted by Environmental
Consulting Bureau in association with BSI and Ethos at Sheraton, Dammam on 13/01/2001.

* Participated in the Storage Tank & Pipe Leakage Monitoring System seminar held on 21 May
2000 at the Carlton Al-Moaibed Hotel, Al-Khobar arranged by Al-Tuwairqi Group of Companies.

* Completed The A.W.S. Educational Program Welding Inspection seminar at Dhahran Palace Hotel
Ramada, in Dhahran in Feb., 2000.

* Participated in a training workshop on “Introduction to ISO 9000” at Karachi arranged by Skill
Development Council, Employer’s Federation of Pakistan in collaboration with N.M.C. Training
in March, 1998.

* Participated in the workshop titled “Total Quality Management (T.Q.M.)” held by University of
Economics and Technology, Karachi at campus in Oct., 1997.

* Participated in the workshop titled “ISO 9000” conducted by U.E.T., City Campus, Karachi in Oct.,
1997.

* Completed successfully “Seven Tools of Statistical Quality Control” course conducted by Pakistan
Institute of Quality Control (P.I.Q.C.), at Hotel Holiday Inn Crowne Plaza, Karachi in June, 1997.

COMPUTER BASED e-LEARNING, ENGINEERING

* Completed ARAMCO in-house self study Enginering Course on “Quality Control and Failure
Analysis” on 6/15/2004 at Rabigh Refinery, Rabigh.

* Completed ARAMCO in-house self study Enginering Course on “Joining” on 3/15/2004 at COT,
Yanbu .

* Completed ARAMCO in-house self study Enginering Course on “Failures of Welded, Brazed &
Soldered Joints” on 10/7/2003 at COT, Yanbu .
_____________________________________________________________________________________

CLASSS ROOM BASED, COMPUTER LITERACY

Attended ARAMCO in-house Awareness session on Microsoft Office 2003 ( Word, Excel, Outlook,
Powerpoint, Access & Publisher) at Yanbu Refinery, Yanbu on Sept. 21, 2004.

Successfully completed ARAMCO in-house SAP End-User Training on QM 32-QM Projects
Task Overview Maintainer on 11/12/2003 at NGL Plant, Yanbu.

Successfully completed ARAMCO in-house SAP End-User Training on QM 31-QM Projects
Inspection on 11/10-11/2003 at NGL Plant, Yanbu.

Successfully completed ARAMCO in-house SAP End-User Training on QM 29-QM Master Data
Maintainer Projects on 11/09/2003 at NGL Plant, Yanbu.

Successfully completed ARAMCO in-house SAP End-User Training on QM 35-QM Projects
Browser on 11/08/2003 at NGL Plant, Yanbu.

Successfully completed in-house SAP classroom training course in SAP BASIC SKILLS from SAP
Computer Centre, NGL, ARAMCO on September, 20, 2003.

Completed two months Standard Course of Microsoft Office’97 (E.D.P., DOS, Windows 95, Word,
Excel and PowerPoint) from Software Developer’s Academy, Karachi securing Grade A in 1998.

COMPUTER BASED e-LEARNING

Completed ARAMCO in-house self study Course on SAP QM-40: NCR Processing-Refresher on
8/10/2003 at COT, Yanbu .

Completed ARAMCO in-house self study Course on SAP QM-32: Projects Task Overview
Maintainer Index-Refreher on 7/29/2003 at COT, Yanbu.

Completed ARAMCO in-house self study Course on SAP QM-35: Projects Browser Index-
Refresher on 7/29/2003 at COT, Yanbu .

CAREER HIGHLIGHTS

• Over 15 years experience in different areas and categories viz. Project Construction Inspection, Supplier / Vendor Inspection, Monitoring, Quality Control & Quality Assurance with multinational and national companies of repute in private and state sector of Pakistan and Saudi Arabia.
• Experienced in Saudi ARAMCO, S.A.B.I.C., S.W.C.C., & S.C.E.CO. (East) Projects of Saudi Arabia.
• Saudi ARAMCO approved PID Senior Project Inspector, Welding/Coating/Mechanical/Piping
(C-7114019-0) & VID, Mechanical Inspector.
• Experienced in World Bank’s Petroleum Project.
• Exposed to Field, Floor and Office Environment of Oil / Gas & Petrochemical Industries.
• Work experience in harsh environments and remote locations.
• Computer Literate.
• A.W.S., Certified A. Welding Inspector.
• Certified Internal Quality Auditor.
______________________________________________________________________________________

PROFESSIONAL EXPERIENCE

SAUDI ARAMCO SAUDI ARABIA
Feb.’ 2003 to Mar.’ 2006
Saudi Aramco is the largest supplier of crude oil and natural gas liquids in the world. The company is involved in the exploration, refining, sales, marketing & shipping of petroleum products on every continent. It has joint venture partners in Asia, Europe and the United States. Its fleet of supertankers sails the seven seas.

Saudi Aramco has been ranked the No. 1 oil company in the world for the 16th straight year by the respected global energy trade journal Petroleum Intelligence Weekly (PIW).

Served as a Resident Inspector, Level IV for Techint from HAINSCO, Vendor Inspection Division/TPI.

PROJECT: BI-3176 ARABIAN LIGHT CRUDE INCREMENT GOSP PHASE III, HARADH
EPC Contractor: Techint Int’l Construction Corp., Sub-contractor/vendor: Arabian Int’l Co., Bahrah

Responsible for Visual, Dimensional, Welding, Coating (Painting/Galvanizing) & Quantity Inspection for Platforms (Columns, Beams, Frames, Vertical Bracings, Stringers, Stairs, Channels, Bracings, Bolts, Nuts, Washers & Expansion bolts) around 270 MTs.


Served as a Senior Project Inspector, Welding/Piping/Coating/Mechanical in Projects Inspection Division (PID).

* PROJECT: BI-0010 DIESEL HYDRO TREATER COMPLEX, Riyadh Refinery, Central Province
EPC Contractor: Technip Saudi Arabia Ltd.,
Sub-Contract: REVAMPING OF TANKS: Sub-Contractor, Arabian Fal Co.
Project Cost: $ 265 million.

* PROJECT: AR-4509 FEED CONDITIONING FACILITIES, Riyadh Refinery, Central Province
EPC Contractor: M. S. Al-Suwaidi Industrial Services Co., Ltd., Operation & Maintenance Division,
(A subsidiary of M. S. Al-Suwaidi Holding Co., Ltd.)

* PROJECT: BI-0010 DIESEL HYDRO TREATER COMPLEX, Yanbu Refinery, Western Province
EPC Contractor: Tecnicas Reunidas Gulf Co., Ltd., Sub-Contractor, Mechanical: M. S. Al-Suwaidi
Industrial Services Co., Ltd., Jubail (A subsidiary of M. S. Al-Suwaidi Holding Co., Ltd.)
Project cost: $ 317 million

* PROJECT: BI-3407 ADVANCED FIRE TRAINING CENTRE, Juaymah, Eastern Province
Engineering: Saud Consult, PC Contractor: AGAP Arabia Ltd.
Project cost: $ 22 million

* PROJECT: BI-3034 PIPELINE REHABLITATION PHASE III: QRT-10/QA-8/QA-3/QQ-1
PIPELINE’S REPLACEMENT, Eastern Province
Engineering: Petrocon Arabia Ltd., Contractor: MACE Saudi Arabia Co., Ltd. (A member of Al-
Khodari Group)
Project cost: $ 8.4 million

* PROJECT: BI-8233 EAST WEST TO RABIGH CRUDE OIL PIPELINE (EWRB-1) Ø 36”,
Western Province
EPC Contractor: Saudi Arabian SAIPEM Ltd., (Eni GROUP)
Project cost: $ 84 million

* PROJECT: BI-3510 CRUDE UNIT DEBOTTLENECK, Yanbu Refinery, Western Province
Contractor: Abdullah Hamoud Al-Shuwayer Trading & Contracting Co.
Project cost: $ 9.8 million

PRINCIPAL DUTIES: Perform variety of complex inspection function within the assigned inspection discipline in addition to providing day to day work directions as required for the inspection of new facilities assuring that material are correct for the intend service, work performed conforms with engineering specifications and/or SAUDI ARAMCO Standards and monitor the implementation of the project Quality Control Program with minimal Supervision.
• Monitors all aspects of welding operation on new piping.
• Performs piping inspections including that which requires the use of caliper, micrometer, Hi-Low gauge, Digital Thermometer, Filler gauge, etc.
• Witness calibration of Pressure gauges, Relief Valves, Pressure Recorders, Temperature Recorders and review of Calibration Certificates from Third party ARAMCO approved Calibration Agencies & Construction Contractors.
• Witness hydrostatic tests on valves (body and seat), piping and pneumatic tests on pipes supports, reinforcement pads, Annular and Roof plates of Tanks. Review Hydrostatic, P&ID & Safety Instruction Sheets to assure that the correct pressure is used and that relief valves are properly set and installed.
• Witness PT., MT., PWHT, Brinell Hardness test, reviewed tests results and Batch Certificates.
• Performs inspection of surface preparation for coatings, including anchor pattern measurements.
• Certifies critical coating applicators.
• Inspects compressor, surge tank, blast pot, air blast hoses, air filter & other items of equipment necessary to achieve satisfactory blasting nozzle pressures.
• Check coating thickness to ensure conformance with Code and Standard requirements.
• Witness holiday testing of critical coatings.
• Writes inspection Reports, Non-Compliance Reports and makes e-Log Book entries of on-site inspection findings, suggestions and maintain inspection records.
• Performs other miscellaneous related duties as directed by the Field Supervisor.
________________________________________________________________________

DAR AL RIYADH CONSULTANTS SAUDI ARABIA
March 1999 to Jan.’2002
An ISO 9001 certified, large multinational Engineering consultancy.

Served as Mechanical Inspection Engineer for our client, Parsons International, Pasadena at Supplier Quality Assurance Office, Khober visiting various vendors / suppliers in Industrial areas of Dammam & Jubail for Inspection / Witnessing & verifying test results.

PROJECT: IBN ZAHR (POLYPROPYLENE) P.P. II, JUBAIL
SAUDI EUROPEAN PETROCHEMICAL CO.

A) Gaskets and Isolation Kits were inspected according to Source Inspection Plan, Purchase Order
(Deliverable Items List), Technical Documents (Specification for Shop Preparation of Equipment and
Materials for Shipment & Storage, General Piping Material Procurement Specification, Gasket
Procurement Specification & General Specification for Purchase Orders, ASME B16.20 Metallic
Gaskets for Pipe Flanges-Ring Joint, Spiral Wound and Jacketed & ASME B16.21Nonmetallic Flat
Gaskets for Pipe Flanges.

* Visual, Dimensional & Quantity Inspections.
* Documents Reviewed and Verified (Certificates of Compliance according to P.O., Material &
Specifications), Authorized Waivers and Deviations, Packing List, Master Packing List & Delivery
Notes.
Observation Points checked, Minimum
* Material Stamping and or Marking
Mandatory Witness / Hold Points Checked
* Cleanliness Inspection, Final
* Verification of Marking, Preservation & Preparation of Materials for Shipping.

Manufacturer & Inspection Site: Al-Iman Gasket Factory, 2nd Industrial Area, Dammam.

B) Safety Relief Valves were inspected for:
* Visual Inspection * Tagging / Marking Inspection
and Witness Tested for:
* Cold Set Pressure Testing * Leak Testing * Back Pressure Testing * Painting Inspection

Assembler & Inspection Site: Dresser Al-Rushaid Valve and Instrument Co., Ltd., (DARVICO),
Support Industrial Area, Jubail.

C) Visual Inspection, Final was carried out on Steel Structures, Galvanized (Beams, Ladders, Cage
Ladders, Monorails, Columns & Shim Plates) as per Project Specifications.

Galvanizer & Inspection Site: Eastern Lighting Factory, Qateef (Sub-Contractor of Zamil Steel
Buildings Co., Ltd., Industrial Area, Dammam.)

D) Visual Inspection / Dimensional Checks & Galvanizing Inspection were conducted on Steel Structures
(Handrails, Cage Ladders, & Ladders) as per Project Dwg’s.

Fabricator & Inspection Site: Zamil Steel Buildings Co., Ltd., 2nd Industrial Area, Dammam.

E) Visual Inspection, Final was carried out & Performance Tests were witnessed on “Hyster” Pedestrian /
Rider Pallet Trucks with Platform, Mobil AutoFill Trolleys (For Automatic filling of battery cells,
mounted on Trolleys) & “Hyster” Forklift Trucks, Battery / Diesel Powered.

Importing Agent & Inspection Site: Yusuf bin Ahmed Kanoo, Machinery and Construction
Equipment Division Warehouse, Khobar / Dammam Highway, Dammam.

PROJECT: PETROKEMYA OLEFINS III, JUBAIL

A) Visual, Dimensional, Painting & Quantity Inspections were done on H.V.A.C. Fresh Air Intake Stack as per Fabrication Detail Dwg’s of Sub-Contractor, Suwaidi Steel.

Fabricator & Inspection Site: M.S. Al-Suwaidi Steel Fabrication Est., Support Industrial Area,
Jubail. (Sub-Contractor of Zamil Air Conditioners, Support Industrial Area, Jubail)

B) Visual, Dimensional & Painting Inspections, Final were carried out on Air Handling Units as per
Manufacturer’s literature.

Manufacturer and Inspection Site: Zamil Air Conditioners, Warehouse Support Industrial Area, Jubail.

KEMYA (AL-JUBAIL PETROCHEMICAL CO.)

One of the 20 manufacturing affiliates of S.A.B.I.C. (Saudi Arabian Basic Industries Corp.) situated in Jubail Industrial city manufacturing Polyethylene. Kemya is a joint venture of EXXON (Irving, TX) and SAUDI BASIC INDUSTRIES. EXXON is top amongst Chemical Processing’s 50 companies of the world by revenue ($ 100,697 million) for the year 1998.

PROJECT: KEMYA MAJOR PROJECTS

SAUDI ARABIAN PARSONS LIMITED

A Full Service Engineering and Construction Company, managing Major Projects Worldwide. Parsons International and S.A.P.L. were the managing contractors for the expansion and debottlenecking work of (Phase VI) L.L.D.P.E., Plant & O.S.B.L. Total cost of the project exceeded $1 billion.

Served as Turn Over Specialist in Packages Turn Over Department.
______________________________________________________________________________________

I PURI TERMINAL LIMITED PAKISTAN
May’98 to Mar.’99

The biggest Edible Oil and Molasses Storage Tanks facilities Project in private sector constructed at Industrial Area Port Qasim, Karachi.

PROJECT: EDIBLE OIL & MOLASSES STORAGE TANKS FACILITIES

Served as a Mechanical Engineer of Quality Control / Assurance for owner company I Puri Terminal Ltd., and solely responsible for Execution and Inspection of Storage Tanks & Piping fabrication and erection works.

Tanks fabrication and erection contractor: Ittefaq Welding Works
______________________________________________________________________________________

SIDDIQSONS TIN PLATE LTD. July’97 to May’98

Siddiqsons is a privately owned group of companies with a combined turnover of roughly $50m. The 100,000 tpy Pakistan’s first Electrolytic Tinning Line is at Winder, Balochistan about 90 k.m. from Karachi. The total project cost estimated at around $35m., which was financed 60% in the form of debt and 40% as equity. Among the equity participants are Sollac of France and Japan’s Mitsubishi. Each invested $1m., for a 7% stake. Siddiqsons own shareholding is 54% and its investment is total around $6.5m.

PROJECT: ELECTROLYTIC TINNING LINE PROJECT

Served as Mechanical Engineer (Piping) of Quality Control / Assurance for sponsor company S.T.P.L.

Co-sponsors: Mitsubishi Corporation of Japan
Sollac of France
Turnkey Project Management: Siemens Pak., Engg., Co., Ltd.
Engg., & Construction Services
Mechanical Works Contractor: Mehmood Enterprises
______________________________________________________________________________________

ASIA PETROLEUM LIMITED Dec.’96 to May’97

A prestigious Joint Venture Private Oil Company with foreign and local equity partnership operating & maintaining an oil pipeline system near Karachi.

PROJECT: HUB RIVER FUEL OIL PIPELINE

Served as Mechanical Engineer of Quality Control / Assurance for A.P.L., and solely responsible for Execution and Inspection of Tank Farm Piping and Mechanical Works.

A) TANK FARM PIPING AND MECHANICAL WORKS:
Fabrication and Erection of Piping according to Project Drawings (P. & I. Ds, Piping General Arrangements, Plans and Piping Isometrics), Project Specifications and ASME Code For Pressure Piping, B31.3 Chemical Plant and Petroleum Refining Piping.

* Verified B.O.Q. material against ISO’s * Received material as per Specification
* Issued material against Demand Note * Visual Inspection
* Dimensional Inspection * Fabrication and Erection Procedure Insp.
* Welding Inspection * N.D.T. (Radiographic) Inspection
* Hydrostatic Testing Procedure Inspection * Sandblasting & Painting Procedure Insp.
* H.C. Insulation (Sheet Metal Cladding) Inspection * Raising of Non-Conformance Reports
* Verifying Running Bills of contractor * Interface with contractor’s Site Incharge

B) STANDARD & MISCELLANEOUS PIPE SUPPORTS:
Fabrication and Erection of Pipe Shoe-Slide, Pipe Shoe With Guide, Pipe Guide, Dummy Leg-Slide, Dummy Leg With Guide, Wear Pad, Adjustable Support, Tee Support, Hanger Support and Base Plate according to Project Specifications & Documents.

* Visual Inspection * Dimensional Inspection
* Material Inspection * Welding Inspection
* Fabrication and Erection Procedure Inspection * Sand Blasting & Painting Inspection

C) TANK FARM ACCESS PLATFORMS:
Fabrication and Erection of Access Platforms for M.O.V.’s on Tank’s Skin, Branch off lines and Cross
Over Platforms on Piping according to Project Drawings and Plans.

* Visual Inspection * Dimensional Inspection
* Material Inspection * Welding Inspection
* Fabrication and Erection Procedure Inspection * Sand Blasting & Painting Inspection

Contractor: Al-Tariq Constructors (Pvt.) Ltd.
______________________________________________________________________________________

SGS PAKISTAN (PVT.) LTD. Nov.’95 to Nov.’96

SGS is the World’s leading Inspection, Verification, Testing and Certification Co.

PROJECT: HUB RIVER FUEL OIL PIPELINE

Served as Mechanical Inspector of Quality Control / Assurance for our client M/s. Asia Petroleum Limited, where I was responsible for the Construction Inspection of an Insulated Underground Cross Country Heavy Furnace Oil Ø 14″ Pipeline and its related facilities (Oil Pumping and H.F.O. Storage Terminal at Pipri), financed by World Bank at a cost of US $ 95 million.

A) MAINLINE PRIODUCTION WELDING INSPECTION:
Mainline Construction Inspection according to API STANDARD 1104 (Welding of Pipelines and
Related Facilities) and Project Specifications.

* Mainline Welding Inspection {Dimensional & Visual Inspection (Fit-up, During Welding & Post
Welding)} * Tie-In Welding Inspection
* Repair Welding Inspection * Rewelding Inspection
* Field Joint Corrosion Coating Inspection * Holiday Detection Inspection
* Tie-In Coating Inspection * Coating Repair Inspection
* Hydrostatic Testing Inspection, Mainline * Dewatering Mainline, Inspection

Sub-Contractor: Procon Pipelines (Pvt.)

B) STORAGE TANKS INSPECTION:
Fabrication & Erection Inspection of Make-Up Water, Treated Water and Condensate Recovery Tanks
According to Project Drawings, Specifications and API Standard 650 (Welded Steel Tanks for Oil
Storage).

* Visual Inspection * Dimensional Inspection
* Material Inspection * Welding Inspection
* Fabrication & Erection Procedures Inspection * N.D.T. (M.P. Testing Inspection)
* Sand Blasting & Painting Inspection * Hydrostatic Testing Inspection
* P.P. Insulation / Sheet Metal Cladding Inspection

Sub-Contractor: H.H. Trading Corporation

C) INDUSTRIAL EQUIPMENTS INSTALLATION INSPECTION:
Equipment’s Inspection including Pre-commissioning according to Consultant’s P. & I.Ds, Vendor’s
P. & I.Ds, Flow Diagrams, General Arrangement Drawings and Specifications.

I) ROTARY EQUIPMENTS:
Pumps (Electrical & Diesel Driven Mainline), Booster, Firewater (Motor, Diesel Engine Driven &
Jockey), Foam, Raw Water, Treated Water, Make-Up Water, Boiler Feed Water, Condensate Cooling
Water, Furnace Oil & Diesel Fuel.

II) STATIC EQUIPMENTS:
Tanks (Potable Water, Furnace Oil Day, Diesel Fuel Day, Foam Concentrate & Air Receiver),
Strainers, Furnace Oil Heaters, Metering & Meter Prover Skid, Boilers, Boiler Blowdown Drum,
Cooling Tower, Emergency Generator, Condensate Cooler & Exchanger, Furnace Oil Pig Launcher &
Receiver, Pretreatment / Reverse Osmosis Units, Ion Exchanger (Softening Unit), Boiler Chemical
Dosing Unit, Deaerator, Instrument & Utility Air Package, Acid and Chemical Dosing Units.

* Foundations and anchor bolts * Pipe supports and structure Insp.
* Base plates level Inspection * Pump Insp.
* Coupling bolts Inspection * Belt drives Insp.
* Alignment driver and pump Inspection * Suction piping and valves per P&ID. Insp.
* Operated suction valves manually * Discharge piping and valves per P&ID. Insp.
* Operated discharge valves manually * Filter/ Strainer Inspection
* All ancillary piping per P. & I.D. Inspection * Every flange, bolt, nut, gasket & fitting Insp.
* Grating Inspection * All local indicating inst. Physical Inspection
* Physical hazards Inspection * Confirming personnel protection Inspection.
* Insulation Inspection * Float valve Inspection
* Vent / overflow Inspection * Confirming press. / temp. Relief valves setpoints
* Hydrostatic test results for piping / tank / vessel / filter Inspected and confirmed
* Material test certificates for equipment / tank / filter Inspected and confirmed
* Confirming vendor manual referenced * Confirming nil outstanding deficiency list
* Confirming tagged out

Owner: Asia Petroleum Limited (APL), Engineering Consultant: Worley Engineering International
Ltd., & E.P.C. Contractor: Promet Engineering (Singapore) Pte. Ltd.
______________________________________________________________________________________

SEFEC ENGINEERING (PVT.) LTD. Feb.’95 to Oct.’95

One of the leading Fabricator and Erectors of Industrial Plants sector.

PROJECT: K.ES.C. BIN QASIM THERMAL POWER STATION, UNIT NO. 6

As Assistant Manager, Quality Assurance / Control I was responsible for the Visual and Dimensional Inspection of Piping according to Project Drawings and Applicable ASME Code for Pressure Piping, ASME / ANSI B 31.1 Power Piping.

Owner: Karachi Electric Supply Corporation (K.E.S.C.)
Consulting Engineers, Pakistan: NESPAK
Consulting Engineers, West Germany: FICTNER
Contractor: Marubeni Corporation, Tokyo, Japan /
Babcock-Hitachi K.K. Tokyo, Japan

PROJECT: D.G. KHAN CEMENT, N.W.F.P.

Visual and Dimensional Inspection of Steel Structures viz., Jet Pulse Filter (Bracket for controller), Clean Air Chamber {Side Plate, Side Plate (Valve Side)}, Gobble Plate, Ladder and railings (Cages for ladder, Top ladder, Low ladder) etc. according to DS 320, BS 5500 form 1982 or local Standard and Project Drawings.

Consultant: Cements Plants Consultants A/S Denmark
Contractor: F.L. Smidth & Co., A/S Denmark
______________________________________________________________________________________

ARAB INSPECTION CO. (AICO) SAUDI ARABIA
Feb.’92 to Jan.’95

The only national co., in the service industry providing Third Party Engineering Inspection Consultancy Services on Quality Control & Assurance, in Saudi Kingdom.

S.W.C.C. MEDINAH-YANBU DESALINATION AND POWER PLANT-PHASE 2
PROJECT: (YANBU MEDINAH WATER TRANSMISSION SYSTEM)

A) As Inspection Engineer of Quality Assurance / Control & Welding, I was mainly responsible for the
Inspection of Spiral Submerged Arc Welded Steel Line Pipe for our client M/s. Saline Water
Conservation Corporation, Saudi Arabia, according to API SPECIFICATION 5L (Specification for
Line Pipe) and M-O1 Project Specification.

* Visual Inspection
* Dimensional Inspection
* Non Destructive Testing Insp. (Ultrasonic, Radiographic & Dye Penetrant.)
* Hydrostatic Testing-Pipes
* Interpretation of Quality Control Inspection Test results and reports.

Contractor, Manufacturer & Inspection Site: National Pipe Co., Ltd., Old Abqaiq Road, Dhahran.

B) Fiberglass (Glass-Fiber-Reinforced-Thermosetting-Resin) Pressure Pipes and Fittings according to
ANSI / AWWA C950 Standards.

* Visual Inspection * Hydrostatic Test (ASTM D 3517)
* Dimensional Inspection * Indentation Hardness Test (ASTM D 2583)
* Mechanical Tests
i) L.O.I. Ignition Loss of Cured Reinforced Resin (ASTM D 2584)
ii) Stiffness Test (ASTM D 2412)
iii) Axial Tensile Strength Test (ASTM D 0638)
iv) Hoop Tensile Strength Test (ASTM D 2290)
* Review of Quality Control Inspection Test results and reports

Contractor: Mitsubishi Heavy Industries Ltd. Manufacturer & Inspection Site: Amiantit Fiberglass
Industries Ltd., First Industrial Area, Dammam.

C) Bondstrand Series 6000 RTR-Pipes and Fittings.

* Visual, Dimensional & Hydrostatic Test (ASTM D 2992) Inspections and review of Quality Control
Inspection Test results and reports.

Contractor: ANSALDO Energia S.P.A. Manufacturer and Inspection Site: Bondstrand, Ltd.,
(Ameron Corrosion Resistant Piping Division), First Industrial Area, Dammam.

D) Steel Structures & Handrails inspected according to Project Drawings.

* Visual & Dimensional Inspections and review of Quality Control Inspection Test results and reports.

Contractor: Belleli Saudi Heavy Industries, Fabricator and Inspection Site: Zamil Steel Buildings
Company Ltd., First Industrial Area, Dammam / Domco Yard, Seaport, Dammam.

SCECO (EAST) PROJECTS: NARIYAH CONTROL BUILDING,
QAISUMAH CONTROL BUILDING &
QAISUMAH SERVICE CONTROL BUILDING.
(As-Summan Area & Reinforcement of Wadi Al-Miyah Substations)

A) Fabrication Process and Assembly Inspection of Steel Doors (Doorframes, Doors & Doors Leaves
Framework) according to Project Drawings & BS 476; Part 22 & Technical Specification of SCECO.

* Visual, Dimensional, Material, Quantity Inspections and review of Quality Control Inspection Test
results and reports.

Fabricator and Inspection Site: Industrial Contractors (INCO), Steel Fabrication Division, First
Industrial Area, Dammam.

B) Inspection of Fabricated Structural Steel Supports & Galvanized Coatings according to Project
Drawings and Specifications as per BS 729, ASTM A 123 & ASTM A 153.

* Physical, Visual & Dimensional Inspections as per SCECO (EAST) Specifications.

Fabricator and Inspection Site: ABAHSAIN-SECEM Ltd., Fabrication Shop, Khober / Dammam
Highway.

PROJECT: 2030/69KV RAKAH BSP, RAKAH, KHOBER

Inspection of Raychem Electrical Component Kits (Low and medium voltage heat shrinkable
Terminations, heat shrinkable insulation boots, light weight insulators, cable box glands, earthing kits,
joints, heat shrinkable control cable joints, heat shrinkable transition joints, etc.) as per Raychem
Specifications.

* Physical, Visual, Material & Quantity Inspections were carried out.

Owner: Saudi Consolidated Electric Company, SCECO (EAST), Consulting Engineers: Saudi
Consulting Services (Saudconsult), Contractor: ABAHSAIN-SECEM Ltd., For Electrical Work.
______________________________________________________________________________________

CENTRAL GOVERNMENT ORGANIZATION

METROPOLITAN STEEL PAKISTAN
CORPORATION LTD., KARACHI. Jan.’89 to Dec.’91
(Manufacturer and Inspection Site)

A State Enterprise engaged in the manufacturing business of Hot Rolled Products i.e. Bailing Hoops, Wire Rods, Round Bars, American and Russian Deformed Bars, Angles, Channels, Girders, etc. The mill is the biggest re-rolling mill of Pakistan.

Quality Control Department:
Served as Mechanical Inspector in Q.C.D. and acquainted in critical techniques of Inspection and
conversant with the use of all types of measuring instruments required for Inspection purposes.
______________________________________________________________________________________

Educationally well blended and having built a successful career gaining wide inspection skills in Industrial Inspection. I wish to continue my development by securing a proper place with a professionally managed organization where my practical and academic experience can make greater achievements.