NDT Level-II UT RT PT MPT Metallurgy Engineer Six Sigma
NDT.org Member Since: 2007
Added: 1/10/2007
Last Updated: 1/10/2007
Last Updated: 1/10/2007
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
TX Texas
Country:
United States
Status:
I am willing to Travel.
I need a job as soon as possible.
I am willing to work overseas.
I prefer permanent jobs.
I need a job as soon as possible.
I am willing to work overseas.
I prefer permanent jobs.
Certifications
NDT-Level-II in UT, RT, PT, MPT from Southern Inspection Services, Vishakpatnam, India.
Six Sigma Green Belt Certification from South Dakota School of Mines and Technology
Six Sigma Green Belt Certification from South Dakota School of Mines and Technology
Education
Masters degree in Materials Engineering and Science from South Dakota School of Mines and Technology (GPA-3.95).
Bachelors Degree in Metallurgy and Materials Technology from Jawaharlal Nehru Technological University, India (GPA-3.95).
Bachelors Degree in Metallurgy and Materials Technology from Jawaharlal Nehru Technological University, India (GPA-3.95).
Experience
Job Title : Graduate Research Assistant (Aug 2005 – Dec 2006)
Advanced Materials Processing Center, SDSM&T.
Description : Worked as Graduate Research Assistant, developing lack of consolidation (LOC) defects in Friction Stir Welding of Al 7075 T-7351 plates and finding the minimum critical size of defect which does not have an effect on the mechanical properties of the friction stir welds and predicting fatigue life of friction stir welds with LOC defects using NASGRO software, in Advanced Materials Processing and Joining Laboratory, South Dakota School of Mines and Technology. Coordinating with CNDE (Iowa state) about inspecting friction stir welds with defects using UT and RT
Environment : Friction Stir Welding Applications and Non Destructive Testing (UT and RT)
Job Title : Graduate Teaching Assistant (Aug 2005 – May 2006)
Materials and Metallurgical Engineering Department, SDSM&T.
Description : Responsible for training the Undergraduate students in the laboratory involving Hardness Measurement, Charpy Impact testing, Heat treatment, Metallography, Quantitative Image Analysis, Tensile Testing, Fatigue Testing, Optical Microscopy, Jominy End-Quench Test.
Environment: Mechanical Testing
Job Title : Engineer Trainee (Aug 2004 – Aug 2005)
Bharath Heavy Electricals Limited (BHEL), India.
Description : Worked as an Engineer Trainee at BHEL for one year, the largest engineering and manufacturing enterprise in India in the energy-related/infrastructure sector. Had hands on training in the foundry department on patterns drawings, molding and casting of ferrous alloys and non ferrous alloys. Responsibilities included testing of sand for Green compression, Dry compression, Clay content, Moisture content and Permeability testing. Castings produced were inspected by Ultrasonic testing, Dye-penetrant testing and Magnetic particle inspection testing for determining the quality of castings.
Environment: Metallurgical Engineering & Non-Destructive Testing
Job Title : Industrial Trainee (Jan 2004- Jun 2004)
The Vizag Steel Plant Ltd. (VSP), India.
Description : Vizag Steel Plant, Andhra Pradesh, India, is a leading Steel Manufacturing Plant in India. Underwent 6months practical training with the Quality Assurance & Technology Department on “Failure Analysis of Primary Gas Cooling Tubes” as an undergraduate project. Found the root cause of failure of the gas cooling tubes using traditional metallography techniques and also suggested the remedial measures of the same.
Environment: Quality Assurance and Technology Development
Advanced Materials Processing Center, SDSM&T.
Description : Worked as Graduate Research Assistant, developing lack of consolidation (LOC) defects in Friction Stir Welding of Al 7075 T-7351 plates and finding the minimum critical size of defect which does not have an effect on the mechanical properties of the friction stir welds and predicting fatigue life of friction stir welds with LOC defects using NASGRO software, in Advanced Materials Processing and Joining Laboratory, South Dakota School of Mines and Technology. Coordinating with CNDE (Iowa state) about inspecting friction stir welds with defects using UT and RT
Environment : Friction Stir Welding Applications and Non Destructive Testing (UT and RT)
Job Title : Graduate Teaching Assistant (Aug 2005 – May 2006)
Materials and Metallurgical Engineering Department, SDSM&T.
Description : Responsible for training the Undergraduate students in the laboratory involving Hardness Measurement, Charpy Impact testing, Heat treatment, Metallography, Quantitative Image Analysis, Tensile Testing, Fatigue Testing, Optical Microscopy, Jominy End-Quench Test.
Environment: Mechanical Testing
Job Title : Engineer Trainee (Aug 2004 – Aug 2005)
Bharath Heavy Electricals Limited (BHEL), India.
Description : Worked as an Engineer Trainee at BHEL for one year, the largest engineering and manufacturing enterprise in India in the energy-related/infrastructure sector. Had hands on training in the foundry department on patterns drawings, molding and casting of ferrous alloys and non ferrous alloys. Responsibilities included testing of sand for Green compression, Dry compression, Clay content, Moisture content and Permeability testing. Castings produced were inspected by Ultrasonic testing, Dye-penetrant testing and Magnetic particle inspection testing for determining the quality of castings.
Environment: Metallurgical Engineering & Non-Destructive Testing
Job Title : Industrial Trainee (Jan 2004- Jun 2004)
The Vizag Steel Plant Ltd. (VSP), India.
Description : Vizag Steel Plant, Andhra Pradesh, India, is a leading Steel Manufacturing Plant in India. Underwent 6months practical training with the Quality Assurance & Technology Department on “Failure Analysis of Primary Gas Cooling Tubes” as an undergraduate project. Found the root cause of failure of the gas cooling tubes using traditional metallography techniques and also suggested the remedial measures of the same.
Environment: Quality Assurance and Technology Development
Comments
Metallurgical Engineer with NDT background and Six Sigma green belt certification will be more benificial to the company
