OIL AND GAS - API 510 / WELDING INSPECTOR

Malaysia

I am willing to Travel.
I am on a job and will finish soon.
Currently working but always looking.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.

P-RBI, Risk Based Inspection Methodology, Level II Course conducted by PERMATA-INSTEP at PERMATA, Kajang, Selangor, Malaysia.

Radiographic Interpretation Course, PCN Level II, at Ruane TATI, Kijal, Kemaman, Terengganu, Malaysia.

NIOSH Petronas Safety Passport Course (Renewal) conducted by NIOSH Kemaman, Terengganu, Malaysia.

API 510 Certification Course - API 510: Body of Knowledge, conducted by Mr S Hughes and Mr A Smith from Matthews Engineering Training LTD. at Ruane TATI, Terengganu, Malaysia.# Certified as API 510 inspector. Certificate no. 30858.

PCN Welding Inspection Level II Course, conducted by Mr.Richard Robinson from Ruane TATI Sdn Bhd, Kijal Kemaman, Terengganu, Malaysia.# Certified as Welding Inspector PCN Level II, Certificate no. 301726

PCN Radiographic Interpretation Level II Course conducted by Mr.Alec Smith from Ruane TATI, Sdn. Bhd, Telok Kalong, Kemaman, Terengganu, Malaysia.

ASME Section IX, Welding Qualification Course conducted by Mohd Nasir Samat, National Board Authorized Inspector for boiler and pressure vessel which organized S.E.M Inspection Sdn. Bhd., at Senawang, Negeri Sembilan, Malaysia as per SEMI/P/ADM05 Written Practice.

Welding Inspector Course conducted by Mohd Nasir Samat, National Board Authorized Inspector for boiler and pressure vessel which organized S.E.M Inspection Sdn. Bhd. at Senawang, Negeri Sembilan, Malaysia as per SEMI/P/ADM05 Written Practice.

In-service Inspection Course based on NB-23, In-service Inspection (National Board Inspection Code) conducted by Mohd Nasir Samat, National Board Authorized Inspector for boiler and pressure vessel which organized by S.E.M Inspection Sdn. Bhd. at Senawang, Negeri Sembilan, Malaysia as per SEMI/P/ADM05 Written Practice.

Diploma in Mechanical Engineering from University of Technology Mara,Shah Alam, Selangor Darul Ehsan, Malaysia.

SKM (Sijil Kemahiran Malaysia) in Gas Welding Level 1, Arc Welding Level I & II and JTR Technician Certificate from Industrial Training Institute, Seberang Prai, Pulau Pinang, Malaysia.

SUMMARY OF EXPERIENCE
More than 8 years experience in the oil & gas and power plant industries in the field of Supervision, Quality Assurance, Quality Control, Inspection of Materials, Welding inspection, On-Stream Inspection and Plant Turnaround / Shutdown Inspection also related industries i.e. shop/yard fabrication and plant maintenance work complying to the safety standards, clients specification requirement and relevant code & practice. An additional 8 years experience in Mechanical Engineering Works such as Fabrication & Welding Works, Assemble parts, Machine shop (Conventional Milling & CNC Milling, EDM Machine, Grinding Machine).

WORKING EXPERIENCE

1) Company : MALAYSIAN REFINERY COMPANY SDN BHD
Date join : 01st October 2009 - 31st March 2010(End of contract)
Position : API 510 Inspector / Senior Inspector

2) Company : PIONEER ENGINEERING SDN BHD
Date join : 26 Aug 2009 - 12 Sept 2009
Position : API 510 Inspector

3) Company : INTESMAL CORPERATION SDN BHD
Date join : 24th July - 12th Aug 2009
Position : API 510 Inspector

4) Company : CARE ION TECHNOLOGIST SDN BHD
Date join : 19th Oct.'08 - 09th July 2009
Position : Third Party Supervisor / API 510 Inspector

5) Company : DET NORSKE VERITAS PTE LTD (DNV KL)
Date join : 20th - 26th July 2008
Position : API 510 Inspector

6) Company : S.E.M. INSPECTION SDN BHD
Date join : 11 Sept.2002 - 11 Sept.2008
Position : API 510 Inspector / Plant Inspector / Engineering Inspector

7) Company : ZATFEE (M) SDN BHD. (TUMASEK PEWTER)
Date join : 2nd Jan'98 - 31July '02
Position : Tool Room Supervisor / R & D Technician

8) Company : ACTACORP IPI AUTOMATION SDN BHD.
Date join : 3rd Nov.'94 - 28 Oct.'97
Position : Mechanical Technician.

PROJECT INVOLVED:

Major project assignment (technical):

1st Oct'09 - 31st March'10: MALAYSIAN REFINERY COMPANY as Senior Inspector / AREA INSPECTION TEAM LEADER for PSR-2 Revamp Project at PPMSB, Sg Udang, Melaka. Main responsibilities as per following;
1. Supervise Inspection and NDT activities that involved in Area and report to Inspection Head and Area Construction Manager on daily basis.
2. Monitor modification work on existing equipment especially modification that involved on pressurized part as per DOSH / Clientˇ¦s requirement and relevant to API 510 requirement.
3. Review QC Pack & Test Pack before release to Hydrotesting.
4. Monitor progress update of piping that consist of tie-in, hot tap, cold tap and hydrotest work.
5. Monitor progress update of NDT (UTTM, UTFD, PAUT, Conventional RT and Saferad UT that applied on piping and equipment.
6. Do inspection and assessment on new installation equipment in plant as per as-built drawing.

26th Aug-12th Sept'09: PIONEER ENGINEERING SDN BHD as a API 510 Inspector for TALISMAN MALAYSIA LIMITED at Bukit Fraser Thermal Technology Sdn Bhd, Rawang Selangor for project BRA-HX-110A_Crude Heater Channel head repair. Job scope:
i) To review related document such as repair procedure, WPS & PQR, NDT and Painting procedure.
ii) To carry out inspection including verify and witness on NDT testing (PMI, DPT & UTFD), Material inspection, Marking/cutting/edge preparation, Machining/Chamfering, Fit-up and welding and Blasting & Painting.
iii) To prepare inspection report including daily progress report to project person in charged/owner.
iv) To compile all the relevant documents (final documentation of the project) after project completed.

24th July - 12th Aug'09: INTESMAL CORPERATION SDN. BHD as a API 510 Inspector for 4th Major Turnaround at Petronas Fertilizer Kedah Sdn Bhd. Gurun, Kedah, Malaysia. Job covers include but not limited to condition survey of plant equipments inclusive of vessels, reactors, columns, heat exchangers, filters and strainers. Review NDT report such as DPT, MPT, IRIS, RFET and UTTM.

19th Oct'08 - 09th July '09: CARE ION TECHNOLOGIST SDN BHD as a Third Party Supervisor / API 510 Inspector CHEMICALS SDN BHD TA 2006 ˇV EOG & Olefin Unit on DOSH registered equipment.
Job scope: Responsibility as a Third Party Supervisor / API 510 Inspector:
i-Planning and preparation for plant TA (Turnaround 2009)
ii-Supervise and monitor inspection and NDT works before plant shutdown.
iii. Assist Area Coordinator to manage/coordinate manpower and work planning.
iv. Provide proper recommendation on non conformance reports.
v. Review Inspection Report and NDT report.
vi. Review repaired procedure and monitor repaired activity.
vii.To carry out external inspection on the process equipment prior to plant shutdown. To document all the observations of inspection findings in UPV and photo report including the recommendation. Liaise with NDT personnel for NDT works including RT planning.

28th Aug - 11 Sept '08: S.E.M. Inspection Sdn. Bhd as a API 510 Inspector for Ethylene (M) Sdn Bhd. Kerteh, Paka Terengganu, Malaysia.
Job Scope:
To carry out inspection on the process equipment such as heat exchangers and furnace during plant emergency shutdown. To document all the observations of inspection findings in UPV and photo report including the recommendation. To monitor the entire repair works especially on furnace tubes (radiant section).
Liaise with NDT personnel for NDT works including RT planning. Witness pressure test, especially on heat exchanger.

20th - 26th July '08 : Det Norske Veritas Pte Ltd (DNV KL) as a API 510 Inspector for 4th TA July '08 VAM Unit at Celanese Chemicals Pte Ltd plant, Jurong Island, Singapore.
Job Scope:
1. Visual inspection of the process equipment such as heat exchangers, vessels, towers, and tanks.
2. To document the observations of inspection.
3. To liaise with NDT inspectors to have an overview of the status of inspections and guide them on need basis.
4. To coordinate with inspection engineer on overall inspection findings and recommendations.
5. To witness pressure test especially on heat exchanger.

4th - 17th July '08 : S.E.M. Inspection Sdn. Bhd as a API 510 Inspector for Ethylene and Polyethylene (M) Sdn Bhd. Kerteh, Paka Terengganu, Malaysia. Job covers include but not limited to condition survey of plant equipments inclusive of vessels, columns, heat exchangers, filters and strainers. Review NDT report such as DPT, MPT, etc.

4th Jun - 3rd July '08: S.E.M. Inspection Sdn. Bhd as a API 510 Inspector for 4th Major Turnaround at Ethylene and Polyethylene (M) Sdn Bhd. Kerteh, Paka Terengganu, Malaysia. Job covers include but not limited to condition survey of plant equipments inclusive of vessels, reactors, columns, heat exchangers, filters and strainers. Monitor welding works and inspection activities on flare burner tips repair and furnace radiant tubes repair including review RT films. Review NDT report such as DPT, MPT, IRIS, RFET and UTTM.

3 Apr'06 - 02 Jun 08: S.E.M. Inspection Sdn. Bhd as a API 510 Inspector for Ethylene and Polyethylene (M) Sdn Bhd. Kerteh, Paka Terengganu, Malaysia.

Scope of work :
Monitor and inspect the mechanical / piping work for steel structure, column, heat exchanger, vessel and tank relevant to the design and specification requirement.
Monitor the shop and field fabrication activities to ensure that the works been execute according to the specification and standards.
Performed thorough internal and external inspection on DOSH registered equipments such as Pressure vessel, Boilers, Columns, heat exchangers and furnace for Certificates of Fitness renewal during plant shutdown.
To inspect plant equipment and report on condition of items.
To inspect and justify on the CUI for the steam piping system and recommend for remedy action for main line and steam trap systems.
Visual inspection on piping and structure mainly on corrosion survey activities for pipeline and structural support items.
To monitor welding activities of repairs and modifications as per WPS and construction procedure as per client request.
To coordinate and monitor NDT activities as per requirement.
To review NDT reports and comment on action to be taken.
To assist Department of Safety and Health on inspection matters and queries.
Supervision and verification of repair and modification of static equipment.
Witnessed and verify pressure test for static equipment upon completion of final inspection and prior to box-up.
SOE preparation for Major Turnaround 2008 (Ethylene & Polyethylene Plant) for DOSH and non-DOSH equipment such as heat exchanger, column, filter, pressure vessel, reactor and etc
Furnace inspection - Jobs covers on convection and radiant tubes, burner tips, refractory & insulation and monitor welding works for re-tubing as per repair procedure and approved by client.


5 March - 2 Apr.'06: S.E.M Inspection Sdn. Bhd., as a Static Equipment Inspector for Petlin Malaysia Sdn.Bhd Kerteh, Paka, Terengganu, Malaysia during plant Turnaround 2006. Main task are to perform visual inspection on equipments such as heat exchanger, pressure vessel, tank, filter, strainer and reactor for CF (certificates of fitness) renewal. Review NDT report such as DPT, MPT, IRIS, RFET and UTTM for verifications. Witness hydrotest and pneumatic test on heat exchanger.

28/11/05 - 2/3/06 : S.E.M. Inspection Sdn. Bhd as Plant Inspector for Ethylene and Polyethylene (M) Sdn Bhd. Kerteh, Paka Terengganu, Malaysia.

Scope of work :
Monitor and inspect the mechanical / piping work for steel structure, column, heat exchanger, vessel and tank relevant to the design and specification requirement
Monitor the shop and field fabrication activities to ensure that the works been execute according to the specification and standards.
Performed thorough internal and external inspection on DOSH registered equipments such as Pressure vessel, Boilers, Columns, heat exchangers and furnace for Certificates of Fitness renewal during plant shutdown.
To inspect plant equipment and report on condition of items.
To inspect and justify on the CUI for the steam piping system and recommend for remedy action for main line and steam trap systems.
Visual inspection on piping and structure mainly on corrosion survey activities for pipeline and structural support items.
To monitor welding activities of repairs and modifications as per WPS and construction procedure as per client request.
To coordinate and monitor NDT activities as per requirement.
To review NDT reports and comment on action to be taken.
To assist Department of Safety and Health on inspection matters and queries.
Supervision and verification of repair and modification of static equipment.
Witnessed and verify pressure test for static equipment upon completion of final inspection and prior to box-up.

13th - 27th Nov '05: S.E.M Inspection Sdn Bhd, as Area Supervisor for OPTIMAL CHEMICALS SDN BHD TA 2006 EOG & Olefin Unit on DOSH registered equipment.
Job scope: Responsibility as an Area Supervisor
i. Planning and preparation for TA - documentation job walks at site .
ii-Supervise and monitor inspection and NDT works.
iii. Assist Area Coordinator to manage/coordinate manpower and work planning.
iv. Provide proper recommendation on non conformance reports.
v. Review Inspection Report and NDT report.
vi. Review repaired procedure and monitor repaired activity.
vii. Witnessing Leak Test (pneumatic/hydro) on selected heat exchanger.
viii. Review and monitor painting procedures & painting works.

24th May-2nd Jun '05 S.E.M Inspection Sdn. Bhd., as Piping Inspector for Petlin (M) Sdn. Bhd. at Kerteh, Terengganu, Malaysia. Job scope: To carry out corrosion survey on selected piping system.

18th - 28th Apr '05: S.E.M Inspection Sdn. Bhd., as Plant Inspector on Static equipment for DOSH/Non-DOSH and Planning, preparing SOE and review Scheme Of Examination (SOE)) for Petlin (M) Sdn. Bhd. Kerteh Paka, Terengganu, Malaysia during Shutdown year 2006. Job covers include but not limited to condition survey of plant equipments inclusive of vessels, reactors, columns, heat exchangers, filters and strainers. Review NDT report such as DPT, MPT, IRIS, RFET and UTTM for verifications. Witness hydrotest and pneumatic test on heat exchanger.

4th - 13th Apr '05: S.E.M Inspection Sdn. Bhd., as Static Equipment Inspector for Tenaga
Nasional Berhad JanaManjung, Perak, Malaysia during Unit 3 Plant Shutdown on static and non-static equipment. Responsibilities cover inspection of pressure vessels, boilers, drums and heat exchangers. Review NDT report such as DPT, MPT, and UTTM for verifications.

3rdAug-24th Sept '04 S.E.M Inspection Sdn. Bhd., as Static Equipment Inspector / Area Supervisor for Optimal Chemicals (M) Sdn. Bhd, Kerteh Terengganu,Malaysia at Butanol and Derivatives plant during shutdown 2004 on static and Non-static equipment. Responsibilities covers control work load of inspectors and daily updating inspection progress and performed inspection activities on pressure vessels, boilers, drums, columns, heat exchangers and tanks. Review inspection report and NDT report such as DPT, MPT, IRIS, RFET and UTTM for verifications.

18th - 28th July '04: S.E.M Inspection Sdn. Bhd., as Static Equipment Inspector for Perwaja Steel Sdn. Bhd, Telok Kalong, Kemaman, Terengganu, Malaysia during DR Plant shutdown on static and non-static equipment. Responsibilitiescover inspection of pressure vessels, boilers, drums, columns, heat exchangers and tanks.

12th - 15th April '04: Seconded to Pakaruji Sdn. Bhd. as Static Equipment Inspector for FPG Oleochemical Sdn. Bhd. at Tanjong Gelang, Gebeng, Kuantan, Pahang, Malaysia on static and non-static equipment during plant shutdown 2004.

05th ˇV 20th April '04 S.E.M. Inspection Sdn. Bhd as Cleaning Bay Inspector for Petronas Penapisan Melaka Sdn. Bhd. Sg.Udang, Melaka, Malaysia at PSR-2 Phase 3 during Plant Shutdown 2004.

16thJan-3rd Feb '04: S.E.M. Inspection Sdn. Bhd as a Technical Assistance Inspector for Jan.ˇ¦04 Shutdown at Petronas Feterlizer (Kedah) Sdn. Bhd., Gurun, Kedah, Malaysia on static and non-static equipment.

05th - 11th Jan '04: S.E.M. Inspection Sdn. Bhd as a Technical Assistance Inspector for repaired job on the SG Piping (cracking) Rectification Jan.ˇ¦04. at Petronas Feterlizer (Kedah) Sdn. Bhd., Gurun, Kedah, Malaysia

7th - 18th Dec.'03: S.E.M. Inspection Sdn. Bhd as a Technical Assistance Inspector for Dec.'03 Shutdown at at Petronas Feterlizer (Kedah) Sdn. Bhd., Gurun, Kedah, Malaysia on static and non-static equipment.

30th July-12th Aug.03 S.E.M. Inspection Sdn. Bhd as Cleaning Bay Inspector for Petronas Penapisan Melaka Sdn. Bhd. Sg.Udang, Melaka, Malaysia on PSR-2 Phase 2B during Plant Shutdown 2003.

01st - 20th July '03: S.E.M. Inspection Sdn. Bhd as Static Equipment Inspector for Vinyl Chloride (M) Sdn. Bhd., Kerteh, Terengganu, Malaysia on static and non-static equipment.

21st - 25th Apr.'03: S.E.M. Inspection Sdn. Bhd as Static Equipment Inspector (Trainee) for Petronas Penapisan (Melaka) Sdn. Bhd. Sg.Udang, Melaka, Malaysiaon PSR 1 phase 2 Shutdown unit 34 (train 1) on static and non-static equipment.

07th - 12th Apr.'03: S.E.M. Inspection Sdn. Bhd as Static Equipment Inspector (Trainee) for Petronas Penapisan (Melaka) Sdn. Bhd. Sg.Udang, Melaka, Malaysia on PSR 1 phase 2 Shutdown unit 34 (train 2) on static and non-static equipment.


09thFeb-03rd Mar.'03 Seconded to Oilfield Pipeline Inspection Sdn. Bhd. as Static Equipment Inspector for Petlin Sdn. Bhd. Kerteh Paka, Terengganu, Malaysia on 1st Turnaround 2003. Responsibilities cover inspection of pressure vessels, heat exchangers and tanks.

20th - 29th Jan. '03: S.E.M. Inspection Sdn. Bhd as Static Equipment Inspector for Perwaja Steel Sdn. Bhd, Telok Kalong, Kemaman, Terengganu, Malaysia during DR Plant shutdown on static and non-static equipment. Responsibilities cover inspection of pressure vessels, boilers, drums, columns, heat exchangers and tanks.

18th - 24th Dec '02: S.E.M. Inspection Sdn. Bhd as Static Equipment Inspector (Trainee) for Perwaja Steel Sdn. Bhd. Telok Kalong, Kemaman, Terengganu, Malaysia during DR Plant shutdown on static and non-static equipment. Responsibilities cover inspection of pressure vessels, boilers, drums, columns, heat exchangers and tanks.

15th - 23rd Sept. '02: S.E.M. Inspection Sdn. Bhd as Static Equipment Inspector (Trainee) for Perwaja Steel Sdn. Bhd. Telok Kalong, Kemaman, Terengganu, Malaysia, during DR Plant shutdown on static and non-static equipment. Responsibilities cover inspection of pressure vessels, boilers, drums, columns, heat exchangers and tanks.

2ndJan ˇ¦98-31July '02: Zatfee (M) Sdn. Bhd. (Tumasek Pewter) as a Tool Room Supervisor / R & D Technician.
Works covers: Conventional milling, CNC Milling, EDM Machine, Grinding Machine, Design, Fabrication / Welding and Moulding

3rdNov.ˇ¦94-28 Oct.'97: Actacorp IPI Automation Sdn. Bhd as a Mechanical Technician
Works covers: Fabrication/Welding, Assemble parts, Conventional Milling and CNC Milling
Project involved:
1. FMS system, supplied to Perodua, Rawang, Selangor.
2. Scaffold fabrication Machine, supplied to Sanki Kigyo, Batu Caves, Selangor.
3. FCAW machine, supplied to Sanki Kigyo, Batu Caves, Selangor.
4. Stand scaffold support welding machine, supplied to Sapura Sdn. Bhd., Kajang, Selangor.

REFERENCES:

1. ABDUL RAHIM BIN MOHAMAD
INSPECTION HEAD (MRC)
PSR-2 REVAMP PROJECT
PETRONAS PENAPISAN (MELAKA) SDN BHD
76300 SG UDANG, MELAKA
MALAYSIA
HP NO: (6)0199151959
EMAIL: arahim_mohamad@petronas.com.my

2. AZMAN BIN MOHAMED
AREA CONSTRUCTION MANAGER (MRC)
PSR-2 REVAMP PROJECT
PETRONAS PENAPISAN (MELAKA) SDN BHD
76300 SG UDANG, MELAKA
MALAYSIA
HP NO: (6)0126395053
EMAIL: azman_mohamed@petronas.com.my

3. PAUL JAMES
PRINCIPAL STATIC AND TECHNOLOGY ENGINEER
FOSTER WHEELER ENERGY E & C(M) SDN BHD
PSR-2 DEBOTLLENECKING
PETRONAS PENAPISAN (MELAKA) SDN BHD
76300 SG UDANG, MELAKA
MALAYSIA
TEL NO: 60(0)6-352 3212 ext 3212
EMAIL: Paul_James@fwuk.fwc.com

Skills
Proficient in Microsoft Office application such as Word, Power Point, Excel and Access
Familiar with International Codes of practice related to the design fabrication, with respect to welding inspection and QA/QC activity.
Possess excellent verbal and written communication skills,
Determine, dedicated, confident, and organized.
Strong analytical mind, initiative and able to work independently.
Able to interpret Engineering Drawing.

PERSONAL QUALITIES
Responsible, dedicated, high leadership quality, hardworking and willing to learn new skills, detail in work, able to work in team or independently.