NDT.org

NDT.org : Resumes : QC Inspector (Piping, Welding, NDT, Test Package, Umbilical Manufacturing)


Posted: 2/8/2009 6:21:35 PM
Resume Header/Title:

QC Inspector (Piping, Welding, NDT, Test Package, Umbilical Manufacturing)

Country:

Philippines

Extra Info:

I am willing to Travel.
I am on a job and will finish soon.
Currently working but always looking.
I am willing to work overseas.

 Login for contact information.
 
 
 
 
 
 
Certifications:

QC INSPECTOR (PIPING / WELDING / NDT / TEST PACKAGE / UMBILICAL)
REGISTERED WELDING INSPECTOR R/33674
CSWIP 3.1 CERTIFICATE NUMBER 32572
NDT Level II (RT, RTFI, MT, PT)ASNT
KACST Certified Radiation Safety Officer
ARAMCO Certified RTFI
AWS MEMBER, 2008599
CWA MEMBER, 1010173
ASNT MEMBER, 000140587
PWS MEMBER, I-08-1428

Education:

EDUCATION

1995 1996 Ago Foundation College - Bachelor of Science in Radiologic Technology
Graduated Cum Laude
1992 1995 Ago Foundation College - Associate in Radiologic Technology Graduated with Honor
1988 1992 St. Monica Academy - Graduated High School
1982 1988 St. Monica Academy - Graduated Elementary

Experience:

EMPLOYMENT


BUREAU VERITAS ANGOLA
Third Party Inspection and Certification
December 7, 2008 to Present

Position: 3rd Party QC Inspector / Umbilical Tube Inspector

Duties and Responsibilities:

„« Assigned to carry out 3rd Party Inspections on Pazflor (Total) ¡V Technip Super-Duplex Umbilical Tubes Manufacturing at Angoflex, Lobito Angola.
„« Review QC Documents, Monitor and Witness the Stages of Umbilical Tube Manufacturing starting from material receiving, electrical testing, helix lay up, tube tie-in welding, spooling, hydro testing, outer sheath extrusion, material acceptance test, final length marking/cutting, termination and hardware, final acceptance, packing, dispatch, preload out and certification.
„« Witnessed Manual and Automatic Welding of Super Duplex SS Tubes.
„« Review NDT, Umbilical Manufacturing and Testing Reports.
„« Carry out Inspection and Monitoring with TECHNIP and TOTAL Representatives
„« Carry out thickness survey and visual inspection for SOMOIL Tank Fields in Guingila, Soyo Angola




PETRO-RABIGH PROJECT (Rabigh, KSA)
JAPAN GAS CORPORATION (JGC)
Technoserve Construction Company Incorporated
December 2, 2007 to October 15, 2008

Position: QC INSPECTOR (WELDING / PIPING / NDT)

Duties and Responsibilities:

„« Conducted surveillance of Welding, NDT, PMI and PWHT Activities on Subcontractors Designated Area of Responsibility
„« Ensures that all welds meets the Project Requirements and in accordance to the WPS
„« Control calibrated Measuring and Test Equipments used on the project
„« Implement the Project Construction Quality Program at site
„« Ensures that repairs are done correctly and accurately to comply with the Project Specification
„« Implement the Quality Control Intervention points on the Inspection and Test Plans, ITP (Surveillance, Witness, Hold Point and Record Review)
„« Receives Test Packages for Line Checking, Document Reviews and Punch Listings
„« Performs Actual Site Line Checks and Verification as per Approved Isometric drawings
„« Monitors, Records and Clearing of QC Related Punch Items
„« Review and Coordination of NDE and Outstanding Inspection
„« Final Release and Sign¡Xoff of Test Packages
„« Witness Air Blowing, Hydro Test, Service Test, Pneumatic Test and Flushing
„« Ascertains that Safety for Welding, Testing and Related Activities are being implemented




DOLPHIN ENERGY LTD UPSTREAM AND COMPRESSION FACILITIES, QATAR
JAPAN GAS CORPORATION (JGC)
Technoserve Construction Company Incorporated
August 6, 2006 to April 30, 2007

Position: QC INSPECTOR (WELDING / PIPING) / TEST PACKAGE COORDINATOR

Duties and Responsibilities:

„« Coordination with the Designated Sub-Contractors and Area on Responsibilities
„« Receives Test Packages for Line Checking, Document Reviews and Punch Listings
„« Distributes Test Packages to Inspectors and Line Checkers for Site Confirmation and Verification
„« Performs Actual Site Line Checks and Verification as per Approved Isometric drawings
„« Review and Coordination of NDE and Outstanding Inspection
„« Monitors, Records and Clearing of QC Related Punch Items
„« Final Release and Sign¡Xoff of Test Packages
„« Witness Air Blowing, Hydro Test, Service Test, Pneumatic Test and Flushing
„« Visual inspection of Glass Reinforced Fiber Plastic Pipes (GRP) Cement / Bond Joints
„« Witness Barcol Test for Lamination Joints (GRP)
„« Ascertains that Safety for Welding, Testing and Related Activities are being implemented





SOHAR REFINERY PROJECT (Sohar, Oman)
JAPAN GAS CORPORATION (JGC)
Technoserve Construction Company Incorporated
November 5, 2005 to April 30, 2006


Position: WELDING / PIPING INSPECTOR

Duties and Responsibilities:

„« Conducted surveillance of Welding, NDT, PMI and PWHT Activities on Subcontractors Designated Area of Responsibility
„« Ensures that all welds meets the Project Requirements and in accordance to the WPS
„« Conducted Visual Inspection on Production Welds and Witness WQT
„« Ensures that repairs are done correctly and accurately to comply with the Project Specification
„« Review of DWR, NDT, PMI and PWHT Reports
„« Interpret, Evaluate and Review Radiographs as per the Applicable Codes and Standards
„« Receives Test Packages for Line Checking, Document Reviews and Punch Listings
„« Performs Actual Site Line Checks and Verification as per Approved Isometric drawings
„« Monitors, Records and Releases of Test Packages for Testing
„« Witness Air Blowing, Hydro Test, Service Test, Pneumatic Test and Flushing
„« Ascertains that Safety for Welding, Testing and Related Activities are being implemented




SIRTE OIL COMPANY (SOC)
Brega, Libya
July 1, 2005 to October 27, 2005


Position: EQUIPMENT / NDT INSPECTOR

Duties and Responsibilities:

„« Conducted NonDestructive Testing during the SHUTDOWN of Gas Plant, Refinery, Ammonia, Urea and Power Plants of Sirte Oil Company, Libya
„« Conducted SHUTDOWN INSPECTION of Stationary Equipments, Rotors, Blades and Shafts
„« Review Maintenance Data Sheets and Recommends the required NDT and Remedial Actions




EMIRATES INDUSTRIAL LABORATORIES (EIL)
Dubai, UAE / Das Island
April 1, 2005 to June 30, 2005


Position: WELDING / NDT INSPECTOR

Duties and Responsibilities:

„« Conducted SHUTDOWN INSPECTION and Nondestructive Testing during the SHUTDOWN and GENERAL OVERHAUL of Trains 1 & 2 and Boilers 1 & 4 of Abu Dhabi Liquefaction Gas Plant, ADGAS (Das Island)
„« Conducted Welding Inspection and NDT to various steel works on Dubai Dry-docks covering the fabrications, productions and maintenance of Ships, Tankers, Barge and Platforms




GEOTECHNICAL TESTING CENTER (GTC)
Dammam, KSA
March 1, 2004 to December 10, 2004


Position: PID ¡V SAUDI ARAMCO SERVICE-ORDER (NDT / RTFI)

Duties and Responsibilities:

„« Worked under Saudi Aramco Service Order (PID)
„« As NDT Inspector and Radiographic Testing Film Interpreter (RTFI) for various Aramco sites mainly the Saudi Strategic Storage Program (SSSP) Site-3
„« Interprets, Evaluates and Records Radiographic Results as per the Code, Standards and Specifications Required by both Saudi Aramco and the Project
„« Forwards and Relates Inspection Reports to Aramco Inspection Department, Dhahran




GEOTECHNICAL TESTING CENTER (GTC)
Dammam, KSA
August 20, 2002 to March 1, 2004


Position: SITE NDT SUPERVISOR / RADIATION SAFETY OFFICER

Duties and Responsibilities:

„« Site NDT Supervisor, Haradh Gas Plant and Pipeline
„« Interprets and Evaluates Radiographs as per the Reference Codes and Standards such as AWS D1.1, ASME VIII, ASME IX, ASME B31.3, API 1104
„« Conducted Non-Destructive Testing (RT, RTFI, MT, PT, VT, LT, HT) on Gas Plants, Refineries, Bulk Plants, Petrochemical Plants, GOSP, Pipelines and SHUTDOWN
„« Conducted Non-Destructive Testing for Various Industrial Projects with Contractors such as:
„X Al Zamil Steel I and II (Structural and Vessels)
„X Geyad for Saudi Aramco Projects
„X Nesma for Saudi Aramco Projects
„X Olayan Descon (Aramco Bulk Plants)
„X Saudi Constructioneers Establishment
„X Saudi-Belleli (Pressure Vessels and Tanks)
„X Al-Zamil Heavy Industries.
„« As Radiation Safety Officer (RSO)




AL MUTAWA-SAMYONG NDT CO. LTD. (AMSYCO)
Al Khobar, KSA
March 1, 1998 to September 17, 2001


Position: SENIOR NDT INSPECTOR / RADIATION SAFETY OFFICER

Duties and Responsibilities:

„« Conducted Non-Destructive Testing for Various Industrial Projects with Contractors such as:
„X Mohhamad AL Mojil Group of Companies
„X LG Saudi Arabia
„X Daelim Saudi Arabia
„X Al Suwaidi Contracting
„X Al Zamil Heavy Industries, Jeddah, KSA
„X Jamjoom Wescom SA. Jeddah, KSA
„X Arabian International Company, Jeddah KSA
„X IMAD Co. For Saudi ARAMCO Bulk Plant Project at Jeddah, Yanbu, Duba, Tabuk and
Abha KSA
„« Conducted Non-Destructive Testing (RT, RTFI, MT, PT, VT, LT, HT) on Gas Plants, Refineries, Bulk Plants, Petrochemical Plants, GOSP, Pipelines and SHUTDOWN
„« As Radiation Safety Officer (RSO)
„« Keep and maintain records, reports and details pertaining to radiation safety
„« Relate and forward all reports to the Corporate Radiation Safety Officer, Head Office




AL MUTAWA-SAMYONG NDT CO. LTD. (AMSYCO)
Al Khobar, KSA
September 17, 1997 to March 1, 1998


Position: NDT / DARKROOM TECHNICIAN

Duties and Responsibilities:

„« Attend in-house NDT Training and Practical Procedures at Head Office and Job Sites
„« Worked as Darkroom Technician at ARAMCO NGL. Juaymah, KSA
„« Processed Exposed Films and Prepares all Data and Forms for Interpretation
„« Write and Submit Reports as per the Interpreter/Supervisor Instructions

Comments:

SUMMARY

To become part of an Organization involved in EPC, Oil, Gas, Power, Petrochemical Industries and Manufacturing in the Field of Quality Assurance/Control, Documentation, Examination, Inspection and Testing. To participate in the successful completion of the Project through the application of Knowledge, Proficiencies, Skills and Experiences with a group of Professionals and Technical People in their respective, progressive and Internationally Recognized System that offers Opportunities for Continuing Professional Development (CPD).

Scope of Work

Quality Assurance
Quality Control
Piping Inspection
Visual Inspection
Welding Inspection
NDT Inspection
Third Party Inspection
Test Package Handling
Line Checking/Survey
Document Reviews
Pressure Testing
Safety


All Contents Copyright (c) 2014 NDT.org
Use Subject to Terms and Conditions
Phone: 888.278.8804 | webmaster@ndt.org