B.Tech- Bachelor Degree in Mechanical Engineering
CSWIP 3.2.2 Senior Welding Inspector Certification , Reg No-41894
BGAS Gr 3/2 Painting Inspector Certification , Cert No- 45721
QMS Lead Auditor Certification ISO 9001:2008
ASNT level II in UT, RT, MT & PT
CSWIP LEVEL-2 IN RT Interpretation
Experience 11.5 years-onshore and offshore.
Familiar with international codes- ASME SECTION ¡VI , II-A,B,C,V, VIII, IX , NACE MR0175, ASME 31.1, ASME 31.3,31.4, AWS D1.1, API 510, API 1104, API 5L BS STANDARDS, GOST, Snips etc. Good experience in petrochemical plant materials like- Monnel , inconnel, Duplex, super duplex stainless steel, 300 series stainless steel, low alloy steels, etc. Very much familiar with brazing and welding process like SMAW, GTAW, SAW,FCAW, GMAW

1996-2000- B.Tech-Bachillor Degree in Mechanical Engineering from NSS COLLEGE OF ENGINEERING, University of Calicut, India.

1) Presently working as Client Inspector with ZADCO-PMC, Abu Dhabi offshore for NEW MAIN OIL LINE PROJECT from Feb 2011 to till date.
Client : ZADCO
Experience 11.2rs. Offshore and onshore .Familiar with international codes- ASME SECTION ¡VI , II-A,B,C,V, VIII, IX , NACE MR0175, ASME 31.1, ASME 31.3,31.4, AWS D1.1, API 510, API 1104, API 5L BS STANDARDS, GOST, Snips ETC¡K. Good experience in petrochemical plant materials like- Monnel , inconnel, Duplex, super duplex stainless steel, 300 series stainless steel, low alloy steels, etc. Very much familiar with welding process like SMAW, GTAW, SAW, GMAW
ľReview and documents approval of WPS ,Welders and Welding Operators, NDT Procedure and Operators, Painting Procedures and Review of personnel qualifications
ľPhysical check on incoming material and Review and approval of Material Receipt Voucher Package
ƒæWitness welding Procedures and welder¡¦s qualification tests and all sorts of inspection and NDT activities and conducting audits on internal system
ľMonitor Conformity of material, Material identification ,Root face ,Root gap ,bevel and cleanliness, Ensure staggering of consecutive long seams.
ľMonitor welding activity for Electrode handling, preheat, welding parameters and visual inspection of final welds
ľMonitor NDT activity and review of NDT Reports,PWHT Reports and Radiographic Film Interpretation.
ľWitness and review of Hydrostatic test package and Pneumatic test.
ľWitness Fit up and Weld Visual inspection for Longitudinal seam weld and girth welds for tubular members, jacket leg node can ,non node can, jacket piles.
ľWitness TKY joints of major and minor tubular braces, guides for jacket, pile, riser guard, transition, boat landing,J tube and riser clamps.
ľInspection for anode connections , stand off connection to doubler plates, brace or jacket legs,mudmat, lifting pad eyes
ľInspection for monel sheathing butt and lap joints
ľInspection for deck structures, deck leg columns can long seam welds, node and non node can sections, beam splice welds, majorbeam connections to deck leg, ring plate, star plate, deck leg stabbing guide connections-cone/sleeve/shim plates ,sea fastening and tie down joints
ľSurface preparation and cleanliness for Blasting and painting
ľChecking relative humidity, Calculating Dew point temperature, Blasted surface profile, Density, viscosity of the paint. Checking WFT and DFT of the paint. Check application technique
ľWitness Final visual of the paint for any defects. Reviewing the painting report.

A committed QC/Welding engineer / inspector absolutely conversant and comfortable with Welding Inspection/NDT Static Equipment Inspection and QA/QC activities in the fields of onshore or offshore structures, Pressure vessels, piping, cross country pipeline .
Capable of handling independently coded vessels, offshore and onshore structures, piping etc