Quality/Power Plant/ISO/NDE/AS
NDT.org Member Since: 2009
Added: 8/16/2009
Last Updated: 8/16/2009
Last Updated: 8/16/2009
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
FL Florida
Country:
United States
Status:
I am willing to Travel.
I need a job as soon as possible.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.
I need a job as soon as possible.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.
Certifications
Listed below is my certs and power plant experiences.
UNITED ENGINEERS & CONSTRUCTORS INC. - Philadelphia, PA
Seabrook Nuclear Power Station - Seabrook, NH
HVAC Turnover - Construction Support: Responsibilities included development and implementation of a document review status program for HVAC. Performed final review of HVAC installation, inspection records and ECA's to site specifications. Determined turnover scope packages by performing review of design drawings, changes and data provided by computer printouts..
UNITED STATES TESTING - Hoboken, NJ
Virginia Power - North Anna Power Station - Mineral, VA
OA/OC Document Reviewer: Duties included inspection, material verification, document review of HVAC cable tray hangers, electrical conduit supports, equipment support’s, junction boxes, instrumental supports, pipe hangers and HVAC duct work. Other activities included procedure input and review, weld monitoring, follow up and non-conformance reports and records.
OMNI INTERNATIONAL - Kansas City, MO
Zimmer Nuclear Power Station - Moscow, OH
OA/OC Documentary Review Specialist: Performed visual inspection and craft monitoring in the following disciplines: HVAC, electrical cable trays, structural platform steel, seismic pipe hangers and HVAC ductwork.
SEABROOK STATION NUCLEAR POWER PLANT - Seabrook, NH
OA/OC Documentary Review Specialist: Performed initial, in-process and final inspection and witnessed tests to insure products supplied comply with all codes and standards.
.
COMBUSTION ENGINEERING - Winsor, CT
FP&L - St. Lucie Nuclear Power Plant - Stuart, FL
Ginna Generating Station - Rochester, NY
OA/OC Inspector: Performed visual weld inspection of seismic and non-seismic related supports of pipe, HVAC, ductwork, cable tray, electrical conduit and electrical panels. Monitored craft to ASME codes and various site specifications.
COURTER AND COMPANY - New York, NY
Indian Point Nuclear Power Plant - Peekskill, NY
Millstone Nuclear Power Plant - Waterford, CT
OA/OC Inspector: Performed visual weld inspection and monitored seismic and non-seismic related welds on pipe hangers, cable tray, electrical panels and bus ducts.
.
CODES AND 10 CFR 50
STANDARDS AWS D1.1, d1.3, D9.1
ANSI B31.1 N45.2.6
CAPABILITIES AWS-CWI-Member #85010724
QAE Level II Review/Mechanical
Certified ASNT SNT-TC-1A
UNITED ENGINEERS & CONSTRUCTORS INC. - Philadelphia, PA
Seabrook Nuclear Power Station - Seabrook, NH
HVAC Turnover - Construction Support: Responsibilities included development and implementation of a document review status program for HVAC. Performed final review of HVAC installation, inspection records and ECA's to site specifications. Determined turnover scope packages by performing review of design drawings, changes and data provided by computer printouts..
UNITED STATES TESTING - Hoboken, NJ
Virginia Power - North Anna Power Station - Mineral, VA
OA/OC Document Reviewer: Duties included inspection, material verification, document review of HVAC cable tray hangers, electrical conduit supports, equipment support’s, junction boxes, instrumental supports, pipe hangers and HVAC duct work. Other activities included procedure input and review, weld monitoring, follow up and non-conformance reports and records.
OMNI INTERNATIONAL - Kansas City, MO
Zimmer Nuclear Power Station - Moscow, OH
OA/OC Documentary Review Specialist: Performed visual inspection and craft monitoring in the following disciplines: HVAC, electrical cable trays, structural platform steel, seismic pipe hangers and HVAC ductwork.
SEABROOK STATION NUCLEAR POWER PLANT - Seabrook, NH
OA/OC Documentary Review Specialist: Performed initial, in-process and final inspection and witnessed tests to insure products supplied comply with all codes and standards.
.
COMBUSTION ENGINEERING - Winsor, CT
FP&L - St. Lucie Nuclear Power Plant - Stuart, FL
Ginna Generating Station - Rochester, NY
OA/OC Inspector: Performed visual weld inspection of seismic and non-seismic related supports of pipe, HVAC, ductwork, cable tray, electrical conduit and electrical panels. Monitored craft to ASME codes and various site specifications.
COURTER AND COMPANY - New York, NY
Indian Point Nuclear Power Plant - Peekskill, NY
Millstone Nuclear Power Plant - Waterford, CT
OA/OC Inspector: Performed visual weld inspection and monitored seismic and non-seismic related welds on pipe hangers, cable tray, electrical panels and bus ducts.
.
CODES AND 10 CFR 50
STANDARDS AWS D1.1, d1.3, D9.1
ANSI B31.1 N45.2.6
CAPABILITIES AWS-CWI-Member #85010724
QAE Level II Review/Mechanical
Certified ASNT SNT-TC-1A
Experience
Mr. Joseph Zysk
2505 Bent Pine Street, Melbourne, FL 32935
Cell# 321-698-0874
JZysk1@cfl.rr.com
Objective: A position with a growing company in the Quality Engineering Field
Accomplishments:
18 Years of experience in Quality, Engineering and Manufacturing.
5 Years in Cost Analysis of re-work, Cost of Quality, DPPM. 5P and 5S - programs, ISO 13485.
ISO 9001/2008 Lead Assessor, Kaizen Project Manager, NDT,AWS - CWI, AS9100,IPC .NACE
Electronic build and Assembly detailed work instruction and training.
Experience: Advanced Machine & Tool , Fort Pierce, Fl Feb 2009 to July 2009
Worked as a Quality Engineer for precision machining,, coordinated duel certifications of ISO 9001/2008 and AS9100 B. Worked on lean development programs, PPQ for Siemens, MDR Systems. I worked with certain inspection tools and techniques, laser mics, calipers, mics, xrf equipment, comparators for validation of incoming/final product acceptance. Set up process tools and frequency for testing, measuring and audits. I worked on several different projects for Disney. DOD start - up programs for PM and the company President.
PCI Inc, Melbourne, FL Nov 2005 to Feb 2009
Worked as Quality Manager for chemical analysis, plating, and NPI
processing. Handled MRB functions, developed processes and procedures for incoming verification, and worked on cost savings programs. I conducted many supplier audits and PPAP programs. Worked with thickness gauges, PH meters, mics, and used several types of high resolution microscopes.
MC Assembly, Melbourne, Jan 2003 to Dec 2005
Worked as a Quality Manager for PCB production, setup final inspection and test programs. I also worked with new customer and RMA reporting. NPO start up and AS customers.
eCircuit Inc., Melbourne, FL July 2002 to Jan 2003
Quality Manager/Operations
Worked as an ISO Rep and control of quality operations, dealing with RMA’s and with customer Audits. Performed internal audits of QMS system.
Worked with test engineers to setup and perform customer testing.
I worked with teams in PCB manufacturing.
Aero Manufacturing, Beverly, MA Aug 2001 to May 2002
Quality Assurance Coordinator
Planned, coordinated and directed Quality Control programs.
I assisted management in execution of change over from ISO 9001/1994 to present 9001/2000 ISO standards.
Formulated and maintained QC objectives.
I was instrumental in DPPM and cost analysis.
Managed & supported Error Proofing projects with FMEA and six-sigma processing through GE.
APW, Hudson, NH July 1997 TO August 2001
Senior Quality Process Engineer
Coordinated and planned manufacturing process in plant.
I established work measurement programs; such as KPI, Kaizen methods, Error Proofing Projects.
I restructured work flow and relocated work stations and equipment.
Work as Supplier Base Management for External Audit of New Suppliers and created new supplier surveys.
I was part of the Quality System Team for over-all system standards.
QA Technology, Hampton, NH April 1988 to June 1997
Assistant Quality Manager
Coordinate and supervise workers in the Quality standards.
Became Calibration Coordinator for in house
Developed work instructions and assembly details.
Worked with ATE system assembly and integration.
Education: Essex Catholic HS -Newark NJ - 1973
Newark State College - Newark, NJ - 1974
Northern Essex Community College - Haverhill, MA - 1984
Training:
ANSI/610A, Fiber Optic, ASME.
Technical training and courses from the Nuclear Field and Power Plants. NDE certifications, UT,RT,RT,VT,MT
ESD Training
Clean Room
Weld Inspection
SPC
ISO 9001/2008
AS9100 Rev.B
2505 Bent Pine Street, Melbourne, FL 32935
Cell# 321-698-0874
JZysk1@cfl.rr.com
Objective: A position with a growing company in the Quality Engineering Field
Accomplishments:
18 Years of experience in Quality, Engineering and Manufacturing.
5 Years in Cost Analysis of re-work, Cost of Quality, DPPM. 5P and 5S - programs, ISO 13485.
ISO 9001/2008 Lead Assessor, Kaizen Project Manager, NDT,AWS - CWI, AS9100,IPC .NACE
Electronic build and Assembly detailed work instruction and training.
Experience: Advanced Machine & Tool , Fort Pierce, Fl Feb 2009 to July 2009
Worked as a Quality Engineer for precision machining,, coordinated duel certifications of ISO 9001/2008 and AS9100 B. Worked on lean development programs, PPQ for Siemens, MDR Systems. I worked with certain inspection tools and techniques, laser mics, calipers, mics, xrf equipment, comparators for validation of incoming/final product acceptance. Set up process tools and frequency for testing, measuring and audits. I worked on several different projects for Disney. DOD start - up programs for PM and the company President.
PCI Inc, Melbourne, FL Nov 2005 to Feb 2009
Worked as Quality Manager for chemical analysis, plating, and NPI
processing. Handled MRB functions, developed processes and procedures for incoming verification, and worked on cost savings programs. I conducted many supplier audits and PPAP programs. Worked with thickness gauges, PH meters, mics, and used several types of high resolution microscopes.
MC Assembly, Melbourne, Jan 2003 to Dec 2005
Worked as a Quality Manager for PCB production, setup final inspection and test programs. I also worked with new customer and RMA reporting. NPO start up and AS customers.
eCircuit Inc., Melbourne, FL July 2002 to Jan 2003
Quality Manager/Operations
Worked as an ISO Rep and control of quality operations, dealing with RMA’s and with customer Audits. Performed internal audits of QMS system.
Worked with test engineers to setup and perform customer testing.
I worked with teams in PCB manufacturing.
Aero Manufacturing, Beverly, MA Aug 2001 to May 2002
Quality Assurance Coordinator
Planned, coordinated and directed Quality Control programs.
I assisted management in execution of change over from ISO 9001/1994 to present 9001/2000 ISO standards.
Formulated and maintained QC objectives.
I was instrumental in DPPM and cost analysis.
Managed & supported Error Proofing projects with FMEA and six-sigma processing through GE.
APW, Hudson, NH July 1997 TO August 2001
Senior Quality Process Engineer
Coordinated and planned manufacturing process in plant.
I established work measurement programs; such as KPI, Kaizen methods, Error Proofing Projects.
I restructured work flow and relocated work stations and equipment.
Work as Supplier Base Management for External Audit of New Suppliers and created new supplier surveys.
I was part of the Quality System Team for over-all system standards.
QA Technology, Hampton, NH April 1988 to June 1997
Assistant Quality Manager
Coordinate and supervise workers in the Quality standards.
Became Calibration Coordinator for in house
Developed work instructions and assembly details.
Worked with ATE system assembly and integration.
Education: Essex Catholic HS -Newark NJ - 1973
Newark State College - Newark, NJ - 1974
Northern Essex Community College - Haverhill, MA - 1984
Training:
ANSI/610A, Fiber Optic, ASME.
Technical training and courses from the Nuclear Field and Power Plants. NDE certifications, UT,RT,RT,VT,MT
ESD Training
Clean Room
Weld Inspection
SPC
ISO 9001/2008
AS9100 Rev.B
