Experienced and Certified Level II NDT/QA Inspector
NDT.org Member Since: 2009
Added: 8/24/2009
Last Updated: 8/24/2009
Last Updated: 8/24/2009
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
WA Washington
Country:
United States
Status:
I am willing to Travel.
Currently working but always looking.
I prefer permanent jobs.
Currently working but always looking.
I prefer permanent jobs.
Certifications
• Visual Testing Certification (No Limitations)
• Penetrant Testing Certification (Limitations- Type II, Method C, Form D)
• Magnet Particle Testing Certification
• XRF-Metal Analyzer Operator Certification
• Government Secret Security Clearance
• Penetrant Testing Certification (Limitations- Type II, Method C, Form D)
• Magnet Particle Testing Certification
• XRF-Metal Analyzer Operator Certification
• Government Secret Security Clearance
Education
EDUCATION
•Stevensville H.S., Stevensville, MT; 2003 High School Diploma
PROFESSIONAL TRAINING
• Core NDT(VT,PT, MT), Navy “C” School, 8 weeks Summer 2006
• Radiographic Testing, Navy “C” School, 8 weeks, Fall 2006
•Stevensville H.S., Stevensville, MT; 2003 High School Diploma
PROFESSIONAL TRAINING
• Core NDT(VT,PT, MT), Navy “C” School, 8 weeks Summer 2006
• Radiographic Testing, Navy “C” School, 8 weeks, Fall 2006
Experience
EXPERIENCE
•02/2009 to Present: 40+ hours per week, QA/ NDT lvl II, Delphinus Engineering, Bremerton, WA
•Supervisor: Curtis Proffitt, 757-435-3521, cproffitt@delphinus.com (May contact supervisor) or Kevin Stewart 360-584-4893, kstewart@delphinus.com (May contact supervisor)
•Duties include performing multiple Non-Destructive tests to ensure strict shipyard and Naval guidelines are followed. Perform audits and surveillances on specific job activities to make sure deadlines and quality control points are met in a satisfactory condition.
•Train, certify, and hire new welders for the company by administering a 50 question written exam and a practical application test on 5” schedule 80 pipe with a backing ring, P-3 joint design and welded in the 6G position.
•QAI- In charge of keeping the companies Quality Assurance Workbooks in order throughout each specific task and running through a checklist to ensure quality completion of the job and proper documents.
•11/2003 to 11/2008; 40+ hours per Week; Hull Technician (US Navy), USS John C. Stennis;
• Supervisor: HTC Wheaton, Patrick , 360-627-2552 ext.7029 patrick.wheaton@cvn74.navy.mil (may contact supervisor)
•(Hull Technician- US Navy) Non-Destructive Testing Inspector, Welder and Pipe Fitter/ Plumber.
• Three Years experience in NDT. Certified to ASNT Standards for visual testing, liquid penetrant testing, magnetic particle testing and radiographic inspections.
•Performed Visual and Penetrant tests in accordance with Mil-Std-1688 and 1689, 22 Delta, T9074-AS-GIB-010_271, NAVSEA Tech Pub 278, and the Mil-Std 2035A - NDT Acceptance Criteria” on weldments of high pressure steam piping and low pressure steam drain piping located in the nuclear reactor plant of the USS John C. Stennis.
• QA Craftsman with 500+ hours of experience in reviewing Controlled and Formal Work Packages to ensure sure that QA steps and procedures were followed and that the applicable standards and materials were properly in place.
• Highly knowledgeable and proficient in the operation and procedures of using an Innovex XRF Metal Analyzer Gun. Used to ensure that the correct materials were used to specifically match blueprint drawings.
• Attended Basic and Advanced Firefighting Schools. Also played an important roll on the USS John C. Stennis Fast Action Response Team. Knowledgeable in the maintenance of the SCBA and other FFE.
•02/2009 to Present: 40+ hours per week, QA/ NDT lvl II, Delphinus Engineering, Bremerton, WA
•Supervisor: Curtis Proffitt, 757-435-3521, cproffitt@delphinus.com (May contact supervisor) or Kevin Stewart 360-584-4893, kstewart@delphinus.com (May contact supervisor)
•Duties include performing multiple Non-Destructive tests to ensure strict shipyard and Naval guidelines are followed. Perform audits and surveillances on specific job activities to make sure deadlines and quality control points are met in a satisfactory condition.
•Train, certify, and hire new welders for the company by administering a 50 question written exam and a practical application test on 5” schedule 80 pipe with a backing ring, P-3 joint design and welded in the 6G position.
•QAI- In charge of keeping the companies Quality Assurance Workbooks in order throughout each specific task and running through a checklist to ensure quality completion of the job and proper documents.
•11/2003 to 11/2008; 40+ hours per Week; Hull Technician (US Navy), USS John C. Stennis;
• Supervisor: HTC Wheaton, Patrick , 360-627-2552 ext.7029 patrick.wheaton@cvn74.navy.mil (may contact supervisor)
•(Hull Technician- US Navy) Non-Destructive Testing Inspector, Welder and Pipe Fitter/ Plumber.
• Three Years experience in NDT. Certified to ASNT Standards for visual testing, liquid penetrant testing, magnetic particle testing and radiographic inspections.
•Performed Visual and Penetrant tests in accordance with Mil-Std-1688 and 1689, 22 Delta, T9074-AS-GIB-010_271, NAVSEA Tech Pub 278, and the Mil-Std 2035A - NDT Acceptance Criteria” on weldments of high pressure steam piping and low pressure steam drain piping located in the nuclear reactor plant of the USS John C. Stennis.
• QA Craftsman with 500+ hours of experience in reviewing Controlled and Formal Work Packages to ensure sure that QA steps and procedures were followed and that the applicable standards and materials were properly in place.
• Highly knowledgeable and proficient in the operation and procedures of using an Innovex XRF Metal Analyzer Gun. Used to ensure that the correct materials were used to specifically match blueprint drawings.
• Attended Basic and Advanced Firefighting Schools. Also played an important roll on the USS John C. Stennis Fast Action Response Team. Knowledgeable in the maintenance of the SCBA and other FFE.
Comments
I am currently looking to re-locate to the Southeast part of the Country.
