ASNT TC-1A Liquid Penetrant Level II
ASNT TC-1A Magnetic Particle Level II
ASNT TC-1A Ultrasonics Level II
(longitudinal)
ASNT TC-1A Visual Level II
ASNT TC-1A Radiography Level II
ASNT TC-1A Level II academic and level
I practical in Eddy Current
State license IRRSP radiographer/
trainer status. Dual x-ray and gamma ray.
TWIC card.

01/2004-12/2004 The Ocean Corporation
Houston, Tx
Graduated with Degree in Non Destructive
Testing
Total of 750 in classroom and hands on
training in the Radiographic,
Magnetic Particle, Liquid Penetrant,
Ultrasonic’s, Eddy Current, and Visual
testing methods. Also basic metallurgy,
welding technology, materials
technology, and technical mathematics.
40 hour industrial radiography safety
course which conforms to the
requirements of ASNT IRRSP program.
40 hour HAZMAT training.

Performed the Radiographic testing method
using a Pantec x-ray tube and
Varian x-ray unit. Utilizing the
radiographic inspection method on a wide
variety of metallic materials such as
forgings, castings, tubing, pipe,
fabricated and manufactured extrusion
welds, and other various parts. Also
experienced using a Iridium 192 source for
field radiography of pipe welds,
pressure vessels, and storage tanks and
establishing a 2mr boundary and
proper usage of dosemitry and rate meters.
Responsible for determining
the proper x-ray units, focal spot size,
and focal film distance using
radiographic codes and specifications.
Experienced in determining the type
and position of penetrameters to be used
to qualify the radiograph. Able to
read and interpret film and compare
specimens with drawings and
specifications. Also experienced in film
processing and darkroom
techniques.
Performed the Liquid Penetrant testing
method using magnaflux visible dye
solvent removable, magnaflux water
washable, magnaflux fluorescent, and
magnaflux post emulsifiable liquid
penetrants with dry, non-aqueous wet,
and wet developers. Inspecting various
types of sand castings, investment
castings, weldments, sub-weldments,
forgings, and pipe welds to locate
primary, secondary, and service induced
discontinuities such as cracks,
crater cracks, pin holes, laminations, and
other defects open too the
surface. Skilled using the proper
techniques in the interpretation and
evaluation of liquid penetrant test
results by using adequate lighting, and
proper use of a black light when
applicable. Also in using the proper dwell
times as specified in codes and
procedures. Experienced in the
documentation of liquid penetrant test
results.
Experienced using the Magnetic Particle
testing method using magnaflux
wet, magnaflux dry, and magnaflux wet
fluorescent testing methods using
circular and longitudinal magnetic fields
using head shots, coil shots central
conductor shots, prods, and yokes to
detect defects on or near the surface
of a variety of ferromagnetic material.
Experienced in interpretation and
evaluation of magnetic particle test
results and the proper use of black
lights when applicable.
Also experienced using the ultrasonic test
method to determine accurate
thickness measurements and scanning pipe
and other various materials
using longitudinal saves for defects on
the surface or sub-surface using a
panametrics 36dl or krautkramer meters.
Also have the training hours to
obtain certification in shear wave
ultrasonic’s.
Also performed Visual weld examinations
and welding audits on individual
welders to make sure welds were correct
size, being welded according to
procedures and drawings.

Work History:
1/2012- Present Mistras Services
Duties: Performed level II RT, MT, PT ,UTT
Inspections on several pipeline projects
for Conoco Phillips, Murphy Oil, Shell,
Talisman Energy, and Enterprise.

06/2007-12/2012 Tacom Rock Island
Arsenal U.S.
Department of Defense
Duties: Performed level II inspections
using RT, MT, UT, PT, and VT for
the U.S. Army M119 Howitzer, FRS (forward
repair system), SECM, and
other small arms projects according to
MIL-HDBK 1895B, 1894B, 1265,
1264, MIL-STD 6866, 1949, AMS E433-71,
ASTM E165-80, MIL-M-11472.
Supervisor: Jim Fox 309-782-6465

09/2005-06-2007 Quad City Testing
Laboratory
Duties: Performed RT, MT, PT, UT and VT
field inspections at various
pipelines, chemical plants, power plants,
water towers, storage tanks,
paper mills, and nuclear power plants.
According to ASTM, ASME, and API
codes and procedures.

01/2005-06-2005 Sonic Systems/GE Nuclear
Services
Duties: Performed UT, MT, and PT
inspections at several nuclear power
plants outages across the U.S