AWS-CAWI / NDT LEVEL II-MT,PT,UT-L
NDT.org Member Since: 2009
Added: 9/22/2009
Last Updated: 9/22/2009
Last Updated: 9/22/2009
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
TX Texas
Country:
United States
Status:
I am willing to Travel.
I need a job as soon as possible.
I am willing to work overseas.
I prefer permanent jobs.
I need a job as soon as possible.
I am willing to work overseas.
I prefer permanent jobs.
Certifications
AMERICAN WELDING SOCIETY-CERTIFIED ASSOCIATE WELDING INSPECTOR:AWS CERTIFICATION #09100494
LEVEL II MT,PT,UT-THICKNESS
DIMENSIONAL INSPECTOR
MAGNETIC INDUCTION TESTING INSPECTOR
LEVEL II MT,PT,UT-THICKNESS
DIMENSIONAL INSPECTOR
MAGNETIC INDUCTION TESTING INSPECTOR
Education
TECHNICAL EDUCATION:
The Ocean Corporation, Houston, Texas
11/2004 – 06/2005
ASNT Level II Academic and Level I Practical in:
• 40 hrs. Visual I, II, III and Leak Testing
• 55 hrs. Penetrant Testing (Visible and Fluorescent)
• 70 hrs. Magnetic Particle Testing (Visible and Fluorescent)
• 115 hrs. Ultrasonic Testing (Angle, Straight Beam and Shear wave)
• 85 hrs. Eddy Current Testing
• 90 hrs. Radiographic Testing
• 40 hrs. Radiation Safety (NRC)
• 60 hrs. Welding Techniques
• 30 hrs. Rigging Techniques
• 60 hrs. Hazardous Material and Confined Work Place Safety Practice Emergency Response
• AMERICAN WELDING SOCIETY-CERTIFIED WELDING INSPECTOR SEMINAR 40HRS 7/12/2009-7/17/2009
The Ocean Corporation, Houston, Texas
11/2004 – 06/2005
ASNT Level II Academic and Level I Practical in:
• 40 hrs. Visual I, II, III and Leak Testing
• 55 hrs. Penetrant Testing (Visible and Fluorescent)
• 70 hrs. Magnetic Particle Testing (Visible and Fluorescent)
• 115 hrs. Ultrasonic Testing (Angle, Straight Beam and Shear wave)
• 85 hrs. Eddy Current Testing
• 90 hrs. Radiographic Testing
• 40 hrs. Radiation Safety (NRC)
• 60 hrs. Welding Techniques
• 30 hrs. Rigging Techniques
• 60 hrs. Hazardous Material and Confined Work Place Safety Practice Emergency Response
• AMERICAN WELDING SOCIETY-CERTIFIED WELDING INSPECTOR SEMINAR 40HRS 7/12/2009-7/17/2009
Experience
General Electric/Vetco Gray Inc, Houston, Texas
11/2005 – 5/2009
Quality Control/NDT Inspector
• Inspection of HMF-G & MR-6E subsea riser assemblies.
• Traceability and Post-in documentation of subsea riser assemblies.
• Dimensional inspection of HMF-G risers, MR-6E risers, industrial valve bodies and valve body internal parts.
• Non-Conformance report writing and documentation of industrial valve bodies and parts.
• MT – work with the Magnaflux ARQ-968 stationary magnetic particle machine inspecting industrial valve bodies.
• MT – work with a magnetic particle yoke inspecting industrial welds and on valves.
• Conducting brinnell hardness readings using the King Testers portable and stationary
Models. Also conducting Rockwell hardness on industrial valve bodies.
• PT – work with magnaflux skl-wp doing inspections on industrial valves and welds.
• Magnetic induction testing of cladded surfaces on valves bodies.
• Receiving inspection of industrial valves and components.
• Also worked with Ultrasonic & Phased Array equipment inspecting welds on industrial pipe.
• Monitored assembly and testing of valve bodies and valve actuators according to API 598,600,602,603 and ASTM standards.
Team MQS inspection, Woodriver, Illinois (Conoco Phillips Turnaround)
09/2005 – 11/2005
NDT Inspector
• ET- I worked with ACFM using the amigo, model # 247 inspecting industrial welds.
• RT- I worked with the Innovex System, model # CX-2000A conducting PMI
Inspections on industrial pipe.
• PT- I worked with sp1 visible and fluorescent wet penetrant inspecting industrial welds.
• MT- I worked with contour probe, using 14am prepared bath fluorescent inspecting industrial welds.
• UT- I worked with a panametrics 36dl plus conducting thickness reading Inspections on industrial pipe.
• Also conducted brinnell hardness reading Inspections on industrial pipe.
• Worked with isometric drawings walking down pipe and components for inspections.
H&G Inspection, Houston, Texas
06/2005- 08/2005
NDT Inspector
• PT- I worked with sp1 visible and fluorescent wet penetrant inspecting industrial welds.
• MT- I worked with a contour probe yoke, using dry powder and 14am prepared bath,
• Visible and fluorescent inspecting industrial welds.
• UT- I worked with a panametrics 36dl plus conducting thickness reading Inspections on industrial pipe.
• RT- I worked with Iridium 192, using AFGA D7, D5, D4 & D3 film inspecting industrial welds.
• Worked at BP Texas City using isometric drawings to walk pipe for conducting thickness Reading inspections on industrial pipe.
11/2005 – 5/2009
Quality Control/NDT Inspector
• Inspection of HMF-G & MR-6E subsea riser assemblies.
• Traceability and Post-in documentation of subsea riser assemblies.
• Dimensional inspection of HMF-G risers, MR-6E risers, industrial valve bodies and valve body internal parts.
• Non-Conformance report writing and documentation of industrial valve bodies and parts.
• MT – work with the Magnaflux ARQ-968 stationary magnetic particle machine inspecting industrial valve bodies.
• MT – work with a magnetic particle yoke inspecting industrial welds and on valves.
• Conducting brinnell hardness readings using the King Testers portable and stationary
Models. Also conducting Rockwell hardness on industrial valve bodies.
• PT – work with magnaflux skl-wp doing inspections on industrial valves and welds.
• Magnetic induction testing of cladded surfaces on valves bodies.
• Receiving inspection of industrial valves and components.
• Also worked with Ultrasonic & Phased Array equipment inspecting welds on industrial pipe.
• Monitored assembly and testing of valve bodies and valve actuators according to API 598,600,602,603 and ASTM standards.
Team MQS inspection, Woodriver, Illinois (Conoco Phillips Turnaround)
09/2005 – 11/2005
NDT Inspector
• ET- I worked with ACFM using the amigo, model # 247 inspecting industrial welds.
• RT- I worked with the Innovex System, model # CX-2000A conducting PMI
Inspections on industrial pipe.
• PT- I worked with sp1 visible and fluorescent wet penetrant inspecting industrial welds.
• MT- I worked with contour probe, using 14am prepared bath fluorescent inspecting industrial welds.
• UT- I worked with a panametrics 36dl plus conducting thickness reading Inspections on industrial pipe.
• Also conducted brinnell hardness reading Inspections on industrial pipe.
• Worked with isometric drawings walking down pipe and components for inspections.
H&G Inspection, Houston, Texas
06/2005- 08/2005
NDT Inspector
• PT- I worked with sp1 visible and fluorescent wet penetrant inspecting industrial welds.
• MT- I worked with a contour probe yoke, using dry powder and 14am prepared bath,
• Visible and fluorescent inspecting industrial welds.
• UT- I worked with a panametrics 36dl plus conducting thickness reading Inspections on industrial pipe.
• RT- I worked with Iridium 192, using AFGA D7, D5, D4 & D3 film inspecting industrial welds.
• Worked at BP Texas City using isometric drawings to walk pipe for conducting thickness Reading inspections on industrial pipe.
Comments
Dear Sir,
I, Alonzo Warren am seeking an inspection position with your company. Through my blended experience and demonstrated skills from, non-destructive testing, dimensional inspection as well as the U.S. Army. I can add value to your organization utilizing my collective education and work experiences. And as a hard worker, dependable, dedicated, and detail oriented I believe that I can assist in achieving strategic objectives of any organization.
I, Alonzo Warren am seeking an inspection position with your company. Through my blended experience and demonstrated skills from, non-destructive testing, dimensional inspection as well as the U.S. Army. I can add value to your organization utilizing my collective education and work experiences. And as a hard worker, dependable, dedicated, and detail oriented I believe that I can assist in achieving strategic objectives of any organization.
