Ricardo C. Gualberto Jr.

Qualification:
.
SNT LEVEL II – RADIOGRAPHIC TESTING
SNT LEVEL II – MAGNETIC PARTICLE TESTING
SNT LEVEL II – DYE PENETRANT TESTING
SNT LEVEL II – ULTRASONIC TESTING
SNT LEVEL II – VISUAL TESTING
ROPE ACCESS IRATA No. 1/27038
BOSIET CERTIFIED (OPITO CODE 5700)

Experiences:

Years of extensive working experience in various engineering practices involving Non-Destructive Testing (NDT) and Plant Inspection with emphasis of Maintenance Inspection (Risk Based Inspection), Corrosion Conditioning, Construction and Structural testing. Satisfy the requirement established in the ASNT– Recommended Practice No.SNT-TC-1A (1996, 2001, 2006 edition). Involve to FPSO and Offshore Installation for maintenance inspection and corrosion monitoring, submerge pipe laying (offshore) inspection, onshore oil/gas and petrochemical plant industry maintenance inspection and corrosion conditioning, Onshore pipeline non-destructive test – inspection and coordination, and plant on-plot / off-plot inspection. Automated Inspection System, Mechanized ultrasonic inspection of gas pipeline girth welds using phased arrays, meets or exceeds ASTM and API 1104 codes.
Rope access technology for maintenance inspection, corrosion conditioning and mechanical works.


October 2008 – Present
CAN GLOBAL LTD.
HARENESS ROAD ALTENS
ABERDEEN, AB12 3LE U.K

Client/Project:
EXXONMOBIL KIZOMBA A FPSO & TLP
ESSO EXPLORATION ANGOLA LTD. BLOCK 15, OFFSHORE ANGOLA

NDT MULTI-DISCIPLINE LEVEL II
ROPE ACCESS TECHNICIAN

DUTIES AND RESPONSIBILITIES

Performing maintenance inspection and mechanical works through out FPSO and TLP.
Carry out Risk Based Inspection, Visual inspection and other inspection task as per
Exxonmobil standard and scope of work using various rope access maneuver technique.
Conducting all NDT works as per maintenance and construction work order.




February 2008 – October 2008
CAN GLOBAL LTD.
HARENESS ROAD ALTENS
ABERDEEN, AB12 3LE U.K

Client/Project:
CHEVRON TEXACO
CABINDA GULF OIL COMPANY Malongo, Cabinda ANGOLA
Offshore Installation

NDT MULTI-DISCIPLINE LEVEL II
ROPE ACCESS TECHNICIAN

DUTIES AND RESPONSIBILITIES:

Carry out all Ultrasonic Inspection, Radiographic Testing, Magnetic Particle Testing,
Dye Penetrant Testing, Visual Inspection and other inspection task as per client
standard and scope of work procedure.

Maintenance work which involved corrosion monitoring on various piping system, tank,
vessels structures including small bore using 36/37DL+ and EPOCH 3 & 4 UT
measuring equipments, calibrates all equipment each as per company standard.

Conducting visual inspection on various piping system, vessels, including pipe line
walks, tracing lines identification and reporting of anomalies, corrosion depth
measurement of remaining wall thickness. (both rope access and deck access)

Corrosion profile monitoring on various piping, riser using different abseiling rope
access techniques; prepare all necessary emergency equipment, both radiography
and rope access,

Radiography on different installation, in a safe efficient and productive manner as
per government law radiation safety policy, client and company safety procedures.


January 2004 – January 2008
OCEANEERING/OIS

Client/Project:
MAERSK OIL QATAR Al-Shaheen Field
OFFSHORE INSTALLATION Offshore Qatar

NDT-TECHNICIAN/INSPECTOR
CORROSION CONDITIONING


Duties:
▪ NDT-Multi-Discipline.
▪ NDT- Ultrasonic Corrosion monitoring of hydrocarbon and non-hydrocarbon piping
system for maintenance inspection.
▪ Closed Visual External Inspection.
▪ Closed Visual Internal Vessel Inspection.
▪ Closed Visual Inspection Under Insulation.
▪ Piping Isometric CAD Drawing and Computerized Reporting.
▪ Corrosion Mapping / LSI
▪ Digital Radiography for corrosion survey using SCAR (Small Area Controlled
Radiography).
▪ Plant P&ID-Line list line walks.



September 2002 – February 2003
OCEANEERING
SOLUS SCHALL
STOLT OFFSHORE
On board Lay Barge - 200



Clients/Project:
Offshore Gas Gathering System (O.G.G.S) Nigeria offshore
Shell Petroleum Development Corp. (S.P.D.C) West Africa
Nigeria Ltd.

NDT – Technician / Inspector (MULTI – DISCIPLINE)

 Served as NDT – Technician / Inspector (Multi – Discipline) on board the Lay Barge 200 during the O.G.G.S. project for the S.P.D.C. Nigeria Ltd. Laying 72.9 km of 24" diameter and 236.9 km of 32" diameter exports lines in offshore Nigeria.
 Witness / ensure welders performance qualification test.
 Conduct NDT test X – ray (crawler type) on weldments mainline and double joint station as per applicable codes standards and specifications.
 Ultrasonic Testing (UT shear wave’s detection) on girth welds and confirmation. Evaluate test result against the specification.
 UT lamination checks on pipe cut – back and bevel ends.
 MPI for weld repair excavations area, partial welds and pipes end.
 MPI work (in house) for initiation head, pipe lay down head, lifting pad eye, and towing sockets.
 Check NDT - QA / QC tie – up



June 2000 - April 2002
SAIPEM Eni Saipem Turkey Branch
Blue Stream Project Samsun TURKEY
AUT (Automated Ultrasonic Testing) SCANNER Tech / OPERATOR
NDT- X RAY OPERATOR, MULTI DISCIPLINE, QC-Technician

. Conducting Automated Ultrasonic Testing (AUT) using
RD – Tech Pipe Wizard Phased Array System as an AUT SCANNER TECHNICIAN on the fabrication plant of 24"  girth weld quadruple joint Blue Stream Project. The gasline linked Russia to Turkey (across the Black Sea) of about 376 km gasline
. Manual UT for shear wave (flaw) detection on the repair welds and confirmation.
. UT Lamination check on pipe cut back and bevel ends.
. MPI for repair excavated area and pipe ends.
. MPI work for MV Polar Prince in connection with the Blue Stream Project on the Umbilical Winch Foundation, Tie Down Brackets, Beluga Deck Support & Platforms Foundation Assembly, Aeolus A-frame Deck Stand & Transportation Frame Foundation.

March 4, 2000 to March 31, 2000 PSPC Refinery
Brown & Root Industrial Services Philippines Inc. Tabangao, Batangas City
QA/QC (PIPING) Inspector
▪ Involve in PSPC Refinery Y2K Shutdown / turn-around works


February 1997 to April 30, 1999 OIS Pls. Scotland
Oilfield Inspection Services (OIS)
European Marine Corp. Ltd.
On-board Lay barge Semac-1 (Offshore)

Clients / Project:
Stat Oil "Europipe II" Pipeline Project Emden, Germany
138 kms. 42" Pipe lay (North Sea)

China National Offshore Oil Company (CNOOC) Pinghu, Peoples
Pinghu Oil and Gas Development Project Republic of China
365 kms. 10"  & 14"  dual pipe lay.

MGTC Total Yadana Development Project Yadana, Myammar
314 kms. 36"  pipe lay

UK-Interconnector Pipeline Project Bacton, England -
215 kms. 40"  pipe laid Zeebrugge, Belgium
(North Sea)
NDT - QA/QC Inspector / Technician
▪ Witness / ensure welders performance qualification test.
▪ Conduct NDT test on weldments mainline and double joint station as per applicable
codes, standards and specification.
▪ Evaluate test result against the specification.
▪ Check NDT – QA/QC report tie-up.



Dec. 1990 – Dec. 1996
AMSYCO NDT & INSPECTION LTD. Eastern Province
Kingdom of Saudi Arabia

Clients / Projects:
SAUDI ARAMCO Projects, Operational Plants and Petrochemical facilities as
follows:
- Gas Plant - Well heads
- Gas Oil Separation Plants - Scraper Launcher and Receiver
- Water Injection Plants - Flow Lines
- Refinery - Pipelines
- Sea Water and Treatment Plants - Fabrication
- Khuff Gas Plant


NDT Inspector / Technician
• Ultrasonic Examination using Krautkramer USM-2, USK-6, USL-32 and USK-7 as per flaw detection, scanning and thickness gauging to detect hydrogen induced cracks, corrosion, pitting, lamination and erosion corrosion on drums, tanks exchangers, lines, high pressure vessels and fabrication spools.
• Radiographic Examination using radio active isotope iridium-192, cobalt-60 and x-ray machine of pressure vessels, boilers, super heater tubes, chemical injection lines furnaces, coulomb, nozzles, fabricated spools, weldments and operational piping’s applying different types of radiography techniques as per Aramco requirements and specification.
• Mapping, drawing and updating of On Stream Inspection (OSI) sketch on various plant assigned.
• Attending on various assignment deals with inspectory job – weld quality assurance, hot tapping, well head landing base inspection, hydrostatic testing, and conducting hardness testing inspection.
• Conducting Dye Penetrant and Magnetic Particle testing on chemical drums, high pressure vessels, weld joints on fabricated spools nozzles and nipples as per Aramco requirements and specification.
• Darkroom Laboratory technician
• Radiography Film Interpretation.
• NDT Coordinator


October 1988 – October 1990
Industrial Inspection (Int’l) Inc. Philippines Batangas, Philippines

Clients / Project:
• Caltex Oil Refinery, Philippines Shell Petroleum Corp., Philippine Geothermal Power Plant, National Power Corporation, Methaphil LMG Inc., Cocochem Inc., First Philippine Industrial Corp., Union Carbide Latex Plant, Philippine National Oil Co., AG&P Marine and Fabrication Yard, Keppel Shipyard.
• Delsan Transport Inc. MT Core Diamond (Offshore)

NDT (Non Destructive Testing) Technician
• Conduct Ultrasonic Examination as per flaw detection, crack detection, thickness gauging, corrosion detection and scale survey as per applicable codes standards and specification.
• Radiographic examination of pipelines, process piping, pressure vessels, furnaces, fuel tanks, super heater tubes heat exchangers nozzles during plant shutdown. Weld joints examination on spools, lines, pipe rack, barge and power barge, turbine accessories, LPG tanks and operational piping applying different radiography technique as per code and specification required.
• Magnetic Particle Testing – weldments, forging and casting
• Dye Penetrant Testing - weldments, forging and casting
• Vacuum Leak Testing on storage tanks
• Brinel Hardness testing
• Holiday detection testing
• Radiography Film Processing
• Radiography Film Interpretation
• Offshore scale surveying of ship storage tank like top deck, for castle deck, ship tank top, side shell port and starboard side bulkheads, funnel frame and wave frame.


Trainings, Seminar/
Examinations


▪ Basic Offshore Safety Induction & Emergency Training conducted by Maritime Training Centrum B.V. @ Maasvlakte, The Netherland.
P.S.L. No: E 199374 / BB 860137.
▪ Basic Safety Course includes Personal Survival Techniques, Fire Prevention and Fire Fighting, Elementary First Aid, and Personal Safety and Social Responsibility conducted by Philippine Seafarers Training Center, Manila Philippines C.N. B/PSSR-4589-1299.
▪ ASNT Recommended Practice No. SNT-TC-1A (2006 edition) conducted by Asia
Corrosion Services Inc. in conjunction with CAN Global Ltd.
Ultrasonic Level II (RP2X) C.N. 09/008 (valid 07-Oct-2014)
Radiography Level II (Including Interpretation) C.N. 09/014 (valid 07-Oct-2014)
Magnetic Particle Level II C.N. 09/020 (valid 07-Oct-2014)
Liquid Penetrant Level II C.N. 09/026 (valid 07-Oct-2014)
 Certified to Non Destructive Testing Level II
Conducted by Saudi Aramco K.S.A.
 Certified to NDT Level II (ASNT-TC-1A)
Conducted by AMSYCO TP-1
 Radiation Safety Examination certified to use material / Equipment Producing Ionizing Radiation, conducted by Saudi Aramco Loss Prevention. Tech / OPS 660 / X-ray machine badge no. 394418
 Work Permit Examination – Authorized to work in all Saudi Aramco restricted areas.
C-394418 / #20725
 Film Interpretation Course – AMSYCO K.S.A.
 ASNT NDT Level II conducted by Industrial Inspection Int’l. Inc. Phil.
 Quality Control Inspection Training – EMC / SEMAC-1
 Microsoft Word & Excel (Intellysys Computer Center)
 SAIPEM Eni – RD Tech Pipe Wizard Phased Array System Automated Ultrasonic Inspection Scanner and Associated Hardware operation, maintenance and care training completed.
 Personal Qualification Certificate Level II (Multi-discipline) – Satisfied the training experiences and examination requirements of the company "Written Practice" which is based on the recommendations of SNT–TC–1A 1996 edition conducted by OCEANEERING SOLUS SCHALL.
 Shell Petroleum Development CO. of Nig. Ltd. Swimming Passport 20213.
 Hazard Control and PEC/Premier Safety Management - Safety Training Program H2S/BA Certificate Confirmation # 6367 / Venture Gulf Training Center SN:16664 (valid 05-Nov-08).
 H.U.E.T. (Helicopter Underwater Emergency Training) & Sea Survival Course conducted by Venture Gulf Training Centre – Doha, Qatar (valid 13-June-09).
 IRATA ROPE ACCESS IRATA No. 1/27038
 CHEVRON CABGOC- SWING ROPE COMPLIANCE
 CHEVRON CABGOC- BOAT TRANSFER COMPLIANCE
 CHEVRON CABGOC- H2S CERTIFICATION
 CHEVRON CABGOC- DEFENSIVE DRIVING
 BASIC OFFSHORE SAFETY INDUCTION & EMERGENCY TRAINING (OPITO CODE 5700) Certificate # 08BOSIET-00085-005 Expiry date: 11 September 2012



EDUCATION:


1986 – 1989 Batangas State University (BSU)
Former Pablo Borbon Memorial Institute of Technology
Batangas City, Philippines
 Diploma of (Industrial) Technology -Graduated
 Major in Electronics Technology
 On the Job Training –NDT (Non-destructive Testing)
 On the Job Training - Plant Instrumentation




PERSONAL DATA:

Civil Status : Married
Date of Birth : August 20, 1966
Nationality : Filipino
Passport # : XX2793971


__________________________
RICARDO C. GUALBERTO JR.

Willing to work as an NDT Inspector any where in the globe I also have a rope access which is very useful in feild of NDT.
I am willing to receive any notification of any job via email.