WELDINGANDPAINTING INSPECTOR
NDT.org Member Since: 2009
Added: 10/16/2009
Last Updated: 10/16/2009
Last Updated: 10/16/2009
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
Country:
India
Status:
I am willing to Travel.
Currently working but always looking.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.
Currently working but always looking.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.
Certifications
CURRICULUM VITAE
SAMPATHKUMAR.K
1/61, NEW AGHARARM
AMMANKUDI, ANNDANALLUR (PO),
TRICHY-Dist,TAMIL NADU.PIN-639101.
INDIA Ph: +91- 431- 2614969,
Mobil: +91-9894361144
Email: sampathkumar76@gmail.com
Sampathkumar_76@rediffmail.com
Career Objective :
Seeking a challenging position to utilize my skills, experience and knowledge by serving the employing organization for its growth by constantly improving, upgrading and updating my skills.
Educational Qualification:
Academic:
Bachelor Degree from Annamalai University, India
Technical:
Certification Course in Air-conditioning and Refrigeration Technology
NDE Qualification: ASNT Level II in ASNT-SNT-TC-1A
• RADIO GRAPHIC TESTING
• ULTRASONIC TESTING
• MAGNETIC PARTICLE TESTING
• PENETRANT TESTING
Certified Welding Inspector (CWI) American Welding Society
AWS-CWI: Certificate No: 06042131
Certified Welding Inspector (TWI) CSWIP.3.1 British welding Institute Certificate No.025, Clearance No.28761
NACE Certified Coating Inspector Level -2
CIP Certification Number: 24154
SAMPATHKUMAR.K
1/61, NEW AGHARARM
AMMANKUDI, ANNDANALLUR (PO),
TRICHY-Dist,TAMIL NADU.PIN-639101.
INDIA Ph: +91- 431- 2614969,
Mobil: +91-9894361144
Email: sampathkumar76@gmail.com
Sampathkumar_76@rediffmail.com
Career Objective :
Seeking a challenging position to utilize my skills, experience and knowledge by serving the employing organization for its growth by constantly improving, upgrading and updating my skills.
Educational Qualification:
Academic:
Bachelor Degree from Annamalai University, India
Technical:
Certification Course in Air-conditioning and Refrigeration Technology
NDE Qualification: ASNT Level II in ASNT-SNT-TC-1A
• RADIO GRAPHIC TESTING
• ULTRASONIC TESTING
• MAGNETIC PARTICLE TESTING
• PENETRANT TESTING
Certified Welding Inspector (CWI) American Welding Society
AWS-CWI: Certificate No: 06042131
Certified Welding Inspector (TWI) CSWIP.3.1 British welding Institute Certificate No.025, Clearance No.28761
NACE Certified Coating Inspector Level -2
CIP Certification Number: 24154
Education
CURRICULUM VITAE
SAMPATHKUMAR.K
1/61, NEW AGHARARM
AMMANKUDI, ANNDANALLUR (PO),
TRICHY-Dist,TAMIL NADU.PIN-639101.
INDIA Ph: +91- 431- 2614969,
Mobil: +91-9894361144
Email: sampathkumar76@gmail.com
Sampathkumar_76@rediffmail.com
Career Objective :
Seeking a challenging position to utilize my skills, experience and knowledge by serving the employing organization for its growth by constantly improving, upgrading and updating my skills.
Educational Qualification:
Academic:
Bachelor Degree from Annamalai University, India
Technical:
Certification Course in Air-conditioning and Refrigeration Technology
NDE Qualification: ASNT Level II in ASNT-SNT-TC-1A
• RADIO GRAPHIC TESTING
• ULTRASONIC TESTING
• MAGNETIC PARTICLE TESTING
• PENETRANT TESTING
Certified Welding Inspector (CWI) American Welding Society
AWS-CWI: Certificate No: 06042131
Certified Welding Inspector (TWI) CSWIP.3.1 British welding Institute Certificate No.025, Clearance No.28761
NACE Certified Coating Inspector Level -2
CIP Certification Number: 24154
SAMPATHKUMAR.K
1/61, NEW AGHARARM
AMMANKUDI, ANNDANALLUR (PO),
TRICHY-Dist,TAMIL NADU.PIN-639101.
INDIA Ph: +91- 431- 2614969,
Mobil: +91-9894361144
Email: sampathkumar76@gmail.com
Sampathkumar_76@rediffmail.com
Career Objective :
Seeking a challenging position to utilize my skills, experience and knowledge by serving the employing organization for its growth by constantly improving, upgrading and updating my skills.
Educational Qualification:
Academic:
Bachelor Degree from Annamalai University, India
Technical:
Certification Course in Air-conditioning and Refrigeration Technology
NDE Qualification: ASNT Level II in ASNT-SNT-TC-1A
• RADIO GRAPHIC TESTING
• ULTRASONIC TESTING
• MAGNETIC PARTICLE TESTING
• PENETRANT TESTING
Certified Welding Inspector (CWI) American Welding Society
AWS-CWI: Certificate No: 06042131
Certified Welding Inspector (TWI) CSWIP.3.1 British welding Institute Certificate No.025, Clearance No.28761
NACE Certified Coating Inspector Level -2
CIP Certification Number: 24154
Experience
To
From
K. SAMPATH KUMAR
1/61, New Agraharam
Ammankudi, Andanallur (Po)
Trichy – 639 101, Tamilnadu.
India Ph: +91-431-2614969
Mobil: +91-9894361144
Email: Sampathkumar76@gmail.com
sampathkumar_76@rediffmail.com
Respected Sir
Sub: Application for the Position of QA/QC Welding & Painting Inspector
I hereby bring it to your kind attention that I am a qualified AWS-CWI and CSWIP 3.1 and NACE LEVEL 2 Certified welding and painting Inspector having 9+years of experience and specialized in NDE Inspections and Welding and Painting Inspections in various petro-chemical projects for major Oil Companies in India and in Oman and Saudi Arabia etc.
Please find enclosed herewith a copy of my CV for your kind perusal. Looking forward to receiving a positive reply from your side
Thanking You
Sincerely Yours
(K. Sampath Kumar)
Date:
Place:
CURRICULUM VITAE
SAMPATHKUMAR.K
1/61, NEW AGHARARM
AMMANKUDI, ANNDANALLUR (PO),
TRICHY-Dist,TAMIL NADU.PIN-639101.
INDIA Ph: +91- 431- 2614969,
Mobil: +91-9894361144
Email: sampathkumar76@gmail.com
Sampathkumar_76@rediffmail.com
Career Objective :
Seeking a challenging position to utilize my skills, experience and knowledge by serving the employing organization for its growth by constantly improving, upgrading and updating my skills.
Educational Qualification:
Academic:
Bachelor Degree from Annamalai University, India
Technical:
Certification Course in Air-conditioning and Refrigeration Technology
NDE Qualification: ASNT Level II in ASNT-SNT-TC-1A
• RADIO GRAPHIC TESTING
• ULTRASONIC TESTING
• MAGNETIC PARTICLE TESTING
• PENETRANT TESTING
Certified Welding Inspector (CWI) American Welding Society
AWS-CWI: Certificate No: 06042131
Certified Welding Inspector (TWI) CSWIP.3.1 British welding Institute Certificate No.025, Clearance No.28761
NACE Certified Coating Inspector Level -2
CIP Certification Number: 24154
SAFETY COURSES STCW 95 INDoS NO: 09HL0408
Elementary First Aid (EFA), Personal safety & social Responsibilities (PSSR), Personal Survival Techniques (PST), Fire Prevention & Fire fighting (FPFF)
Total Years of Experience: 09 +Years
COMPUTER LITERATURE.
Ms Office, FoxPro, Lotus & Tally 4.2), Diploma in Oracles from CMTES
Present Status
February 2007 to January 2009
Experience Details
AL-MOHMAD MOJIL GROUP (MMG)
Position: Welding and piping Inspector
Saudi Armco approved sap no: 70005908
Project: SHARQ3”rd Expansion Plant Project (Eastern Petro Chemical Company)
4”, 6”8”24” 14”inch process piping is material is butane, methanol, crude hydrogen, hexane, fuel gas ,propane line and Wash oil and propane line in the client SAUDI ARAMCO (Berry Gas Plant) in 24”inch line in 5km the ROYAL COMMISSION COREEDOOR (KINGDOM OF SAUDI ARAIBAN) area and 14” inch Ethane line 24”Inch propane and fuel gas line in the Saudi Armco jobs
Project name: SALES GAS, ETHANE & PROPANE SUPPLY TO SHARQ JUBAIL
BI NO: 21-00013
Total number line is 7nos, Total length is 45km
Hot Taping 14”Fuelgas 2 lines and 24” Ethane 2 lines total 4 lines
The Armco lines are 7line in 25km
Client:
Saudi Armco (14”&24”inch)
SABIC (Saudi Arabia Basic Industrial Company)
Foster Wheeler Energy Limited
SHARQ (Eastern Petro Chemical Company)
Scope of work:
It’s off plot pipeline and plant piping check the isometric drawings and weld map
Conduction the procedure qualification test and certification as per ASME Sec.IX
Welding inspection during and after welding visual inspection and fit up inspection
Making report and material inspection for client material. Review the heat chart and material test certification as per applicable codes . Review the quality test pack and hydro test pack
Knowledge of various welding process example GTAW, SMAW, GMAW (STT).
The following lines are inspection and preparation of document of HOT TAPING in Armco lines 14” inch FUEL GAS LINES HOT TAPING 2 NUMBERS AND 24” ETHANE LINE HOT TAPING 2 NUMBERS TOTAL 4 HOT TAPING The client is SAUDI ARAMCO and FOSTER WHEELER ENERGY LIMITED ,SHARQ . Attend the inspection of during hot tap welding and fit up . Visual inspection.
The sharq lines are 2 Hot Taping in the royal commission area 4” NOH 50% COSTIC LINE, 3”HEXANE LINE HOT TAPING WORK prepare the document and inspection of hot taping welding before, during and after inspection
Aug2006 to Jan2007
FYSAL MOHMAD QUATHANI AND SONS (FMQ)
Position: Welding Inspector
Project: HNRP to SGP to JGP Capacity Increase Gas Pipe line 28”& 24Inch. 270km (Saudi Armco project)
Client: Saudi Armco
Scope of c work:
Carried out QA/QC visual welding inspection.NDE inspections using RT.MT&PT Interpretation,
Evaluation and preparation of RT films and NDT report, involved in welder qualification tests and welding procedure qualification tests.
Carried out visual welding inspection in the line on the production welds.
Cairn Energy Pvt Limited: 3rd February 2006 – 30th Aug 2006.
Rawa Terminals, Work as WELDING INSPECTOR
East Godavari Dt., in ON-SHORE.
Witness Hydro test of Heat-Exchanger, Fin-Fan Coolers.
Witness Ultrasonic Testing.Carry Out Dimension Analysis
Involve in Corrosion Monitoring Inspection of Pipelines in Off-Shore and On-Shore using Torsion Waves.
Carried out QA/QC visual welding inspection.NDE inspections using RT.MT&PTInterpretation,
Evaluation and preparation of RT films and NDT report, involved in welder qualification tests and welding procedure qualification tests.
Carried out visual welding inspection in the line on the production welds.
Welding inspection of offshore and on shore pipe lines
Review the radiographic films,Witness of Eddy current testing
Carry out internal Inspection for Corrosion.
From 1st January 2006-30th January 2006
Employer: Industrial Quality Concept, Chennai, Tamil Nadu.
Position:
Client: Mettur Thermal Power Station
Scope of Work
Worked in Secluded Shutdown during RLA. During that Shutdown Carried out Visual Inspection of Boilers, Turbine Blades, Furnace, and Cooling Coils. Carried out NDE inspection of Boiler, Turbine, Water wall panels, Headers, Rotor and Pent house.
Carried out Hardness test and Dimensional Analysis of Boilers, Turbine, Furnace and Headers.
From Oct 2004 To Sept 2005
Employer: Sievert Inspection Partners LLC, Sultanate of Oman
Contractor: Punjlloyd Ltd
Client (Company): Petroleum Development of Oman (PDO)
Worked as Multi Discipline NDE and Visual Welding Inspector for Punjlloyd Ltd in their 48” Gas Export Line Project from Sai Nihayda to Sur (260 KM), a PDO Project.
Scope of Work:
Carried out QA/QC Visual Welding Inspections, NDE Inspections using RT, MT & PT,
Interpretation, Evaluation and Preparation of RT Films and all NDE Reports. Involved in welder qualification tests and welding procedure qualification tests. Carried out Visual Welding Inspection in the Line on the Production Welds.
From August 2004 to Sept 2004
Employer: Sievert India Pvt Ltd Mumbai
Contractor: ESSAR Constructions Ltd
Client (Company): Indian Oil Corporation
Project: Chennai To Madurai Pipeline (CTMPL)
Scope of Work:
Worked as Multi Discipline NDE & Visual Welding Inspector for ESSAR Constructions Ltd through Sievert India Pvt Ltd Mumbai, in their 12” to 38” Dia Crude Oil Pipe Line Project of IOC. Performed all NDE Inspections and also visual Welding Inspections on the production welds. Interpreted and Evaluated Radiographs and prepared NDE Reports. Coordinated with the NDE Crew and interfaced with the Client’s Inspection Team for the matters related to Quality Control and Inspections. Also involved in welders and welding procedure qualifications tests.
From Nov 2001 to Aug 2004
Employer: KGP Inspection Services, Coimbatore
Position: NDE Inspector
Scope of Work:
Worked as NDE Inspector in Salem Steel Plant Expansion Project. Carried out UT Thickness Gauging and Lamination Checks. Also carried out MPI and DPT on the fabricated Items.
From Oct 2000 to Sep 2001
Employer: Evergreen NDE Engineers, Trichy
Position: NDE Inspector
Scope of Work:
Worked as a NDT Technician for Evergreen NDT Engineers in various projects
Core Job Activities: UT Normal Beam Method on Rolled Products and Investigation of laminations, bonds, seams in raw materials and checking and verification of fusion zones in welded parts and Corrosion Survey and Thickness Gauging.
Castings: Testing of flanges, Bonnets and Tubing spools
Forged Components: Crank Shafts, Tie Rods, Oilfield Static & Rotary Components
Carried out UT Flaw Detection on the following Components:
Heavy thick boiler drum up to 750MW Capacity
Storage tanks, LPG Bullets, Heat exchangers and Piping
Gas, Oil Pipelines and welding plate testing
Involved in Interpretations, Evaluation of Radiographs and preparation of all the NDE Reports.
From June 1998 To Sept 2000
Employer: Sievert India Pvt Limited
Position: NDT Technician
Scope of Work: Carried out NDE Inspections using RT, UT, and MT & PT in various projects that were undertaken by Sievert India Pvt Ltd.
From Jan 1997 to May 1998
Employer: Saro Engineering Works, Thuvakudi, Trichy, Tamil Nadu, India
Position: Welding and Mechanical Supervisor
Scope of Work:
Involved in supervision of all the fabrication works using welding as primary method. Carried out in house Quality Inspections including Visual Welding Inspections on the fabricated components. Involved in the Fabrications of Boiler Accessories, Heat Exchanger Ducts, and Structures Etc. This was an ancillary unit of BHEL, Trichy. Coordinated with the NDE Crew to carry out the required NDE Tests as per Client Specs and approved IT&P. Interfaced / liaison with the Client Team in matters related to Quality.
Personal Profile:
Father’s Name : S.Krishnamoorthy
Date of Birth : 15.07.1976
Sex : Male
Marital Status : Unmarried
Driving : Dl No/TN/045/002422/2006
Passport Details
Passport No : F4255891
Date of Issue : 23rd JULY 2007
Date of Expiry : 22nd JULY 2017
Declaration: I here by declare that all the information given above are true and correct to the best of my knowledge and conscience.
Yours truly,
(K.SAMPATHKUMAR)
Place:
Date:
From
K. SAMPATH KUMAR
1/61, New Agraharam
Ammankudi, Andanallur (Po)
Trichy – 639 101, Tamilnadu.
India Ph: +91-431-2614969
Mobil: +91-9894361144
Email: Sampathkumar76@gmail.com
sampathkumar_76@rediffmail.com
Respected Sir
Sub: Application for the Position of QA/QC Welding & Painting Inspector
I hereby bring it to your kind attention that I am a qualified AWS-CWI and CSWIP 3.1 and NACE LEVEL 2 Certified welding and painting Inspector having 9+years of experience and specialized in NDE Inspections and Welding and Painting Inspections in various petro-chemical projects for major Oil Companies in India and in Oman and Saudi Arabia etc.
Please find enclosed herewith a copy of my CV for your kind perusal. Looking forward to receiving a positive reply from your side
Thanking You
Sincerely Yours
(K. Sampath Kumar)
Date:
Place:
CURRICULUM VITAE
SAMPATHKUMAR.K
1/61, NEW AGHARARM
AMMANKUDI, ANNDANALLUR (PO),
TRICHY-Dist,TAMIL NADU.PIN-639101.
INDIA Ph: +91- 431- 2614969,
Mobil: +91-9894361144
Email: sampathkumar76@gmail.com
Sampathkumar_76@rediffmail.com
Career Objective :
Seeking a challenging position to utilize my skills, experience and knowledge by serving the employing organization for its growth by constantly improving, upgrading and updating my skills.
Educational Qualification:
Academic:
Bachelor Degree from Annamalai University, India
Technical:
Certification Course in Air-conditioning and Refrigeration Technology
NDE Qualification: ASNT Level II in ASNT-SNT-TC-1A
• RADIO GRAPHIC TESTING
• ULTRASONIC TESTING
• MAGNETIC PARTICLE TESTING
• PENETRANT TESTING
Certified Welding Inspector (CWI) American Welding Society
AWS-CWI: Certificate No: 06042131
Certified Welding Inspector (TWI) CSWIP.3.1 British welding Institute Certificate No.025, Clearance No.28761
NACE Certified Coating Inspector Level -2
CIP Certification Number: 24154
SAFETY COURSES STCW 95 INDoS NO: 09HL0408
Elementary First Aid (EFA), Personal safety & social Responsibilities (PSSR), Personal Survival Techniques (PST), Fire Prevention & Fire fighting (FPFF)
Total Years of Experience: 09 +Years
COMPUTER LITERATURE.
Ms Office, FoxPro, Lotus & Tally 4.2), Diploma in Oracles from CMTES
Present Status
February 2007 to January 2009
Experience Details
AL-MOHMAD MOJIL GROUP (MMG)
Position: Welding and piping Inspector
Saudi Armco approved sap no: 70005908
Project: SHARQ3”rd Expansion Plant Project (Eastern Petro Chemical Company)
4”, 6”8”24” 14”inch process piping is material is butane, methanol, crude hydrogen, hexane, fuel gas ,propane line and Wash oil and propane line in the client SAUDI ARAMCO (Berry Gas Plant) in 24”inch line in 5km the ROYAL COMMISSION COREEDOOR (KINGDOM OF SAUDI ARAIBAN) area and 14” inch Ethane line 24”Inch propane and fuel gas line in the Saudi Armco jobs
Project name: SALES GAS, ETHANE & PROPANE SUPPLY TO SHARQ JUBAIL
BI NO: 21-00013
Total number line is 7nos, Total length is 45km
Hot Taping 14”Fuelgas 2 lines and 24” Ethane 2 lines total 4 lines
The Armco lines are 7line in 25km
Client:
Saudi Armco (14”&24”inch)
SABIC (Saudi Arabia Basic Industrial Company)
Foster Wheeler Energy Limited
SHARQ (Eastern Petro Chemical Company)
Scope of work:
It’s off plot pipeline and plant piping check the isometric drawings and weld map
Conduction the procedure qualification test and certification as per ASME Sec.IX
Welding inspection during and after welding visual inspection and fit up inspection
Making report and material inspection for client material. Review the heat chart and material test certification as per applicable codes . Review the quality test pack and hydro test pack
Knowledge of various welding process example GTAW, SMAW, GMAW (STT).
The following lines are inspection and preparation of document of HOT TAPING in Armco lines 14” inch FUEL GAS LINES HOT TAPING 2 NUMBERS AND 24” ETHANE LINE HOT TAPING 2 NUMBERS TOTAL 4 HOT TAPING The client is SAUDI ARAMCO and FOSTER WHEELER ENERGY LIMITED ,SHARQ . Attend the inspection of during hot tap welding and fit up . Visual inspection.
The sharq lines are 2 Hot Taping in the royal commission area 4” NOH 50% COSTIC LINE, 3”HEXANE LINE HOT TAPING WORK prepare the document and inspection of hot taping welding before, during and after inspection
Aug2006 to Jan2007
FYSAL MOHMAD QUATHANI AND SONS (FMQ)
Position: Welding Inspector
Project: HNRP to SGP to JGP Capacity Increase Gas Pipe line 28”& 24Inch. 270km (Saudi Armco project)
Client: Saudi Armco
Scope of c work:
Carried out QA/QC visual welding inspection.NDE inspections using RT.MT&PT Interpretation,
Evaluation and preparation of RT films and NDT report, involved in welder qualification tests and welding procedure qualification tests.
Carried out visual welding inspection in the line on the production welds.
Cairn Energy Pvt Limited: 3rd February 2006 – 30th Aug 2006.
Rawa Terminals, Work as WELDING INSPECTOR
East Godavari Dt., in ON-SHORE.
Witness Hydro test of Heat-Exchanger, Fin-Fan Coolers.
Witness Ultrasonic Testing.Carry Out Dimension Analysis
Involve in Corrosion Monitoring Inspection of Pipelines in Off-Shore and On-Shore using Torsion Waves.
Carried out QA/QC visual welding inspection.NDE inspections using RT.MT&PTInterpretation,
Evaluation and preparation of RT films and NDT report, involved in welder qualification tests and welding procedure qualification tests.
Carried out visual welding inspection in the line on the production welds.
Welding inspection of offshore and on shore pipe lines
Review the radiographic films,Witness of Eddy current testing
Carry out internal Inspection for Corrosion.
From 1st January 2006-30th January 2006
Employer: Industrial Quality Concept, Chennai, Tamil Nadu.
Position:
Client: Mettur Thermal Power Station
Scope of Work
Worked in Secluded Shutdown during RLA. During that Shutdown Carried out Visual Inspection of Boilers, Turbine Blades, Furnace, and Cooling Coils. Carried out NDE inspection of Boiler, Turbine, Water wall panels, Headers, Rotor and Pent house.
Carried out Hardness test and Dimensional Analysis of Boilers, Turbine, Furnace and Headers.
From Oct 2004 To Sept 2005
Employer: Sievert Inspection Partners LLC, Sultanate of Oman
Contractor: Punjlloyd Ltd
Client (Company): Petroleum Development of Oman (PDO)
Worked as Multi Discipline NDE and Visual Welding Inspector for Punjlloyd Ltd in their 48” Gas Export Line Project from Sai Nihayda to Sur (260 KM), a PDO Project.
Scope of Work:
Carried out QA/QC Visual Welding Inspections, NDE Inspections using RT, MT & PT,
Interpretation, Evaluation and Preparation of RT Films and all NDE Reports. Involved in welder qualification tests and welding procedure qualification tests. Carried out Visual Welding Inspection in the Line on the Production Welds.
From August 2004 to Sept 2004
Employer: Sievert India Pvt Ltd Mumbai
Contractor: ESSAR Constructions Ltd
Client (Company): Indian Oil Corporation
Project: Chennai To Madurai Pipeline (CTMPL)
Scope of Work:
Worked as Multi Discipline NDE & Visual Welding Inspector for ESSAR Constructions Ltd through Sievert India Pvt Ltd Mumbai, in their 12” to 38” Dia Crude Oil Pipe Line Project of IOC. Performed all NDE Inspections and also visual Welding Inspections on the production welds. Interpreted and Evaluated Radiographs and prepared NDE Reports. Coordinated with the NDE Crew and interfaced with the Client’s Inspection Team for the matters related to Quality Control and Inspections. Also involved in welders and welding procedure qualifications tests.
From Nov 2001 to Aug 2004
Employer: KGP Inspection Services, Coimbatore
Position: NDE Inspector
Scope of Work:
Worked as NDE Inspector in Salem Steel Plant Expansion Project. Carried out UT Thickness Gauging and Lamination Checks. Also carried out MPI and DPT on the fabricated Items.
From Oct 2000 to Sep 2001
Employer: Evergreen NDE Engineers, Trichy
Position: NDE Inspector
Scope of Work:
Worked as a NDT Technician for Evergreen NDT Engineers in various projects
Core Job Activities: UT Normal Beam Method on Rolled Products and Investigation of laminations, bonds, seams in raw materials and checking and verification of fusion zones in welded parts and Corrosion Survey and Thickness Gauging.
Castings: Testing of flanges, Bonnets and Tubing spools
Forged Components: Crank Shafts, Tie Rods, Oilfield Static & Rotary Components
Carried out UT Flaw Detection on the following Components:
Heavy thick boiler drum up to 750MW Capacity
Storage tanks, LPG Bullets, Heat exchangers and Piping
Gas, Oil Pipelines and welding plate testing
Involved in Interpretations, Evaluation of Radiographs and preparation of all the NDE Reports.
From June 1998 To Sept 2000
Employer: Sievert India Pvt Limited
Position: NDT Technician
Scope of Work: Carried out NDE Inspections using RT, UT, and MT & PT in various projects that were undertaken by Sievert India Pvt Ltd.
From Jan 1997 to May 1998
Employer: Saro Engineering Works, Thuvakudi, Trichy, Tamil Nadu, India
Position: Welding and Mechanical Supervisor
Scope of Work:
Involved in supervision of all the fabrication works using welding as primary method. Carried out in house Quality Inspections including Visual Welding Inspections on the fabricated components. Involved in the Fabrications of Boiler Accessories, Heat Exchanger Ducts, and Structures Etc. This was an ancillary unit of BHEL, Trichy. Coordinated with the NDE Crew to carry out the required NDE Tests as per Client Specs and approved IT&P. Interfaced / liaison with the Client Team in matters related to Quality.
Personal Profile:
Father’s Name : S.Krishnamoorthy
Date of Birth : 15.07.1976
Sex : Male
Marital Status : Unmarried
Driving : Dl No/TN/045/002422/2006
Passport Details
Passport No : F4255891
Date of Issue : 23rd JULY 2007
Date of Expiry : 22nd JULY 2017
Declaration: I here by declare that all the information given above are true and correct to the best of my knowledge and conscience.
Yours truly,
(K.SAMPATHKUMAR)
Place:
Date:
Comments
To
From
K. SAMPATH KUMAR
1/61, New Agraharam
Ammankudi, Andanallur (Po)
Trichy – 639 101, Tamilnadu.
India Ph: +91-431-2614969
Mobil: +91-9894361144
Email: Sampathkumar76@gmail.com
sampathkumar_76@rediffmail.com
Respected Sir
Sub: Application for the Position of QA/QC Welding & Painting Inspector
I hereby bring it to your kind attention that I am a qualified AWS-CWI and CSWIP 3.1 and NACE LEVEL 2 Certified welding and painting Inspector having 9+years of experience and specialized in NDE Inspections and Welding and Painting Inspections in various petro-chemical projects for major Oil Companies in India and in Oman and Saudi Arabia etc.
Please find enclosed herewith a copy of my CV for your kind perusal. Looking forward to receiving a positive reply from your side
Thanking You
Sincerely Yours
(K. Sampath Kumar)
Date:
Place:
CURRICULUM VITAE
SAMPATHKUMAR.K
1/61, NEW AGHARARM
AMMANKUDI, ANNDANALLUR (PO),
TRICHY-Dist,TAMIL NADU.PIN-639101.
INDIA Ph: +91- 431- 2614969,
Mobil: +91-9894361144
Email: sampathkumar76@gmail.com
Sampathkumar_76@rediffmail.com
Career Objective :
Seeking a challenging position to utilize my skills, experience and knowledge by serving the employing organization for its growth by constantly improving, upgrading and updating my skills.
Educational Qualification:
Academic:
Bachelor Degree from Annamalai University, India
Technical:
Certification Course in Air-conditioning and Refrigeration Technology
NDE Qualification: ASNT Level II in ASNT-SNT-TC-1A
• RADIO GRAPHIC TESTING
• ULTRASONIC TESTING
• MAGNETIC PARTICLE TESTING
• PENETRANT TESTING
Certified Welding Inspector (CWI) American Welding Society
AWS-CWI: Certificate No: 06042131
Certified Welding Inspector (TWI) CSWIP.3.1 British welding Institute Certificate No.025, Clearance No.28761
NACE Certified Coating Inspector Level -2
CIP Certification Number: 24154
SAFETY COURSES STCW 95 INDoS NO: 09HL0408
Elementary First Aid (EFA), Personal safety & social Responsibilities (PSSR), Personal Survival Techniques (PST), Fire Prevention & Fire fighting (FPFF)
Total Years of Experience: 09 +Years
COMPUTER LITERATURE.
Ms Office, FoxPro, Lotus & Tally 4.2), Diploma in Oracles from CMTES
Present Status
February 2007 to January 2009
Experience Details
AL-MOHMAD MOJIL GROUP (MMG)
Position: Welding and piping Inspector
Saudi Armco approved sap no: 70005908
Project: SHARQ3”rd Expansion Plant Project (Eastern Petro Chemical Company)
4”, 6”8”24” 14”inch process piping is material is butane, methanol, crude hydrogen, hexane, fuel gas ,propane line and Wash oil and propane line in the client SAUDI ARAMCO (Berry Gas Plant) in 24”inch line in 5km the ROYAL COMMISSION COREEDOOR (KINGDOM OF SAUDI ARAIBAN) area and 14” inch Ethane line 24”Inch propane and fuel gas line in the Saudi Armco jobs
Project name: SALES GAS, ETHANE & PROPANE SUPPLY TO SHARQ JUBAIL
BI NO: 21-00013
Total number line is 7nos, Total length is 45km
Hot Taping 14”Fuelgas 2 lines and 24” Ethane 2 lines total 4 lines
The Armco lines are 7line in 25km
Client:
Saudi Armco (14”&24”inch)
SABIC (Saudi Arabia Basic Industrial Company)
Foster Wheeler Energy Limited
SHARQ (Eastern Petro Chemical Company)
Scope of work:
It’s off plot pipeline and plant piping check the isometric drawings and weld map
Conduction the procedure qualification test and certification as per ASME Sec.IX
Welding inspection during and after welding visual inspection and fit up inspection
Making report and material inspection for client material. Review the heat chart and material test certification as per applicable codes . Review the quality test pack and hydro test pack
Knowledge of various welding process example GTAW, SMAW, GMAW (STT).
The following lines are inspection and preparation of document of HOT TAPING in Armco lines 14” inch FUEL GAS LINES HOT TAPING 2 NUMBERS AND 24” ETHANE LINE HOT TAPING 2 NUMBERS TOTAL 4 HOT TAPING The client is SAUDI ARAMCO and FOSTER WHEELER ENERGY LIMITED ,SHARQ . Attend the inspection of during hot tap welding and fit up . Visual inspection.
The sharq lines are 2 Hot Taping in the royal commission area 4” NOH 50% COSTIC LINE, 3”HEXANE LINE HOT TAPING WORK prepare the document and inspection of hot taping welding before, during and after inspection
Aug2006 to Jan2007
FYSAL MOHMAD QUATHANI AND SONS (FMQ)
Position: Welding Inspector
Project: HNRP to SGP to JGP Capacity Increase Gas Pipe line 28”& 24Inch. 270km (Saudi Armco project)
Client: Saudi Armco
Scope of c work:
Carried out QA/QC visual welding inspection.NDE inspections using RT.MT&PT Interpretation,
Evaluation and preparation of RT films and NDT report, involved in welder qualification tests and welding procedure qualification tests.
Carried out visual welding inspection in the line on the production welds.
Cairn Energy Pvt Limited: 3rd February 2006 – 30th Aug 2006.
Rawa Terminals, Work as WELDING INSPECTOR
East Godavari Dt., in ON-SHORE.
Witness Hydro test of Heat-Exchanger, Fin-Fan Coolers.
Witness Ultrasonic Testing.Carry Out Dimension Analysis
Involve in Corrosion Monitoring Inspection of Pipelines in Off-Shore and On-Shore using Torsion Waves.
Carried out QA/QC visual welding inspection.NDE inspections using RT.MT&PTInterpretation,
Evaluation and preparation of RT films and NDT report, involved in welder qualification tests and welding procedure qualification tests.
Carried out visual welding inspection in the line on the production welds.
Welding inspection of offshore and on shore pipe lines
Review the radiographic films,Witness of Eddy current testing
Carry out internal Inspection for Corrosion.
From 1st January 2006-30th January 2006
Employer: Industrial Quality Concept, Chennai, Tamil Nadu.
Position:
Client: Mettur Thermal Power Station
Scope of Work
Worked in Secluded Shutdown during RLA. During that Shutdown Carried out Visual Inspection of Boilers, Turbine Blades, Furnace, and Cooling Coils. Carried out NDE inspection of Boiler, Turbine, Water wall panels, Headers, Rotor and Pent house.
Carried out Hardness test and Dimensional Analysis of Boilers, Turbine, Furnace and Headers.
From Oct 2004 To Sept 2005
Employer: Sievert Inspection Partners LLC, Sultanate of Oman
Contractor: Punjlloyd Ltd
Client (Company): Petroleum Development of Oman (PDO)
Worked as Multi Discipline NDE and Visual Welding Inspector for Punjlloyd Ltd in their 48” Gas Export Line Project from Sai Nihayda to Sur (260 KM), a PDO Project.
Scope of Work:
Carried out QA/QC Visual Welding Inspections, NDE Inspections using RT, MT & PT,
Interpretation, Evaluation and Preparation of RT Films and all NDE Reports. Involved in welder qualification tests and welding procedure qualification tests. Carried out Visual Welding Inspection in the Line on the Production Welds.
From August 2004 to Sept 2004
Employer: Sievert India Pvt Ltd Mumbai
Contractor: ESSAR Constructions Ltd
Client (Company): Indian Oil Corporation
Project: Chennai To Madurai Pipeline (CTMPL)
Scope of Work:
Worked as Multi Discipline NDE & Visual Welding Inspector for ESSAR Constructions Ltd through Sievert India Pvt Ltd Mumbai, in their 12” to 38” Dia Crude Oil Pipe Line Project of IOC. Performed all NDE Inspections and also visual Welding Inspections on the production welds. Interpreted and Evaluated Radiographs and prepared NDE Reports. Coordinated with the NDE Crew and interfaced with the Client’s Inspection Team for the matters related to Quality Control and Inspections. Also involved in welders and welding procedure qualifications tests.
From Nov 2001 to Aug 2004
Employer: KGP Inspection Services, Coimbatore
Position: NDE Inspector
Scope of Work:
Worked as NDE Inspector in Salem Steel Plant Expansion Project. Carried out UT Thickness Gauging and Lamination Checks. Also carried out MPI and DPT on the fabricated Items.
From Oct 2000 to Sep 2001
Employer: Evergreen NDE Engineers, Trichy
Position: NDE Inspector
Scope of Work:
Worked as a NDT Technician for Evergreen NDT Engineers in various projects
Core Job Activities: UT Normal Beam Method on Rolled Products and Investigation of laminations, bonds, seams in raw materials and checking and verification of fusion zones in welded parts and Corrosion Survey and Thickness Gauging.
Castings: Testing of flanges, Bonnets and Tubing spools
Forged Components: Crank Shafts, Tie Rods, Oilfield Static & Rotary Components
Carried out UT Flaw Detection on the following Components:
Heavy thick boiler drum up to 750MW Capacity
Storage tanks, LPG Bullets, Heat exchangers and Piping
Gas, Oil Pipelines and welding plate testing
Involved in Interpretations, Evaluation of Radiographs and preparation of all the NDE Reports.
From June 1998 To Sept 2000
Employer: Sievert India Pvt Limited
Position: NDT Technician
Scope of Work: Carried out NDE Inspections using RT, UT, and MT & PT in various projects that were undertaken by Sievert India Pvt Ltd.
From Jan 1997 to May 1998
Employer: Saro Engineering Works, Thuvakudi, Trichy, Tamil Nadu, India
Position: Welding and Mechanical Supervisor
Scope of Work:
Involved in supervision of all the fabrication works using welding as primary method. Carried out in house Quality Inspections including Visual Welding Inspections on the fabricated components. Involved in the Fabrications of Boiler Accessories, Heat Exchanger Ducts, and Structures Etc. This was an ancillary unit of BHEL, Trichy. Coordinated with the NDE Crew to carry out the required NDE Tests as per Client Specs and approved IT&P. Interfaced / liaison with the Client Team in matters related to Quality.
Personal Profile:
Father’s Name : S.Krishnamoorthy
Date of Birth : 15.07.1976
Sex : Male
Marital Status : Unmarried
Driving : Dl No/TN/045/002422/2006
Passport Details
Passport No : F4255891
Date of Issue : 23rd JULY 2007
Date of Expiry : 22nd JULY 2017
Declaration: I here by declare that all the information given above are true and correct to the best of my knowledge and conscience.
Yours truly,
(K.SAMPATHKUMAR)
Place:
Date:
From
K. SAMPATH KUMAR
1/61, New Agraharam
Ammankudi, Andanallur (Po)
Trichy – 639 101, Tamilnadu.
India Ph: +91-431-2614969
Mobil: +91-9894361144
Email: Sampathkumar76@gmail.com
sampathkumar_76@rediffmail.com
Respected Sir
Sub: Application for the Position of QA/QC Welding & Painting Inspector
I hereby bring it to your kind attention that I am a qualified AWS-CWI and CSWIP 3.1 and NACE LEVEL 2 Certified welding and painting Inspector having 9+years of experience and specialized in NDE Inspections and Welding and Painting Inspections in various petro-chemical projects for major Oil Companies in India and in Oman and Saudi Arabia etc.
Please find enclosed herewith a copy of my CV for your kind perusal. Looking forward to receiving a positive reply from your side
Thanking You
Sincerely Yours
(K. Sampath Kumar)
Date:
Place:
CURRICULUM VITAE
SAMPATHKUMAR.K
1/61, NEW AGHARARM
AMMANKUDI, ANNDANALLUR (PO),
TRICHY-Dist,TAMIL NADU.PIN-639101.
INDIA Ph: +91- 431- 2614969,
Mobil: +91-9894361144
Email: sampathkumar76@gmail.com
Sampathkumar_76@rediffmail.com
Career Objective :
Seeking a challenging position to utilize my skills, experience and knowledge by serving the employing organization for its growth by constantly improving, upgrading and updating my skills.
Educational Qualification:
Academic:
Bachelor Degree from Annamalai University, India
Technical:
Certification Course in Air-conditioning and Refrigeration Technology
NDE Qualification: ASNT Level II in ASNT-SNT-TC-1A
• RADIO GRAPHIC TESTING
• ULTRASONIC TESTING
• MAGNETIC PARTICLE TESTING
• PENETRANT TESTING
Certified Welding Inspector (CWI) American Welding Society
AWS-CWI: Certificate No: 06042131
Certified Welding Inspector (TWI) CSWIP.3.1 British welding Institute Certificate No.025, Clearance No.28761
NACE Certified Coating Inspector Level -2
CIP Certification Number: 24154
SAFETY COURSES STCW 95 INDoS NO: 09HL0408
Elementary First Aid (EFA), Personal safety & social Responsibilities (PSSR), Personal Survival Techniques (PST), Fire Prevention & Fire fighting (FPFF)
Total Years of Experience: 09 +Years
COMPUTER LITERATURE.
Ms Office, FoxPro, Lotus & Tally 4.2), Diploma in Oracles from CMTES
Present Status
February 2007 to January 2009
Experience Details
AL-MOHMAD MOJIL GROUP (MMG)
Position: Welding and piping Inspector
Saudi Armco approved sap no: 70005908
Project: SHARQ3”rd Expansion Plant Project (Eastern Petro Chemical Company)
4”, 6”8”24” 14”inch process piping is material is butane, methanol, crude hydrogen, hexane, fuel gas ,propane line and Wash oil and propane line in the client SAUDI ARAMCO (Berry Gas Plant) in 24”inch line in 5km the ROYAL COMMISSION COREEDOOR (KINGDOM OF SAUDI ARAIBAN) area and 14” inch Ethane line 24”Inch propane and fuel gas line in the Saudi Armco jobs
Project name: SALES GAS, ETHANE & PROPANE SUPPLY TO SHARQ JUBAIL
BI NO: 21-00013
Total number line is 7nos, Total length is 45km
Hot Taping 14”Fuelgas 2 lines and 24” Ethane 2 lines total 4 lines
The Armco lines are 7line in 25km
Client:
Saudi Armco (14”&24”inch)
SABIC (Saudi Arabia Basic Industrial Company)
Foster Wheeler Energy Limited
SHARQ (Eastern Petro Chemical Company)
Scope of work:
It’s off plot pipeline and plant piping check the isometric drawings and weld map
Conduction the procedure qualification test and certification as per ASME Sec.IX
Welding inspection during and after welding visual inspection and fit up inspection
Making report and material inspection for client material. Review the heat chart and material test certification as per applicable codes . Review the quality test pack and hydro test pack
Knowledge of various welding process example GTAW, SMAW, GMAW (STT).
The following lines are inspection and preparation of document of HOT TAPING in Armco lines 14” inch FUEL GAS LINES HOT TAPING 2 NUMBERS AND 24” ETHANE LINE HOT TAPING 2 NUMBERS TOTAL 4 HOT TAPING The client is SAUDI ARAMCO and FOSTER WHEELER ENERGY LIMITED ,SHARQ . Attend the inspection of during hot tap welding and fit up . Visual inspection.
The sharq lines are 2 Hot Taping in the royal commission area 4” NOH 50% COSTIC LINE, 3”HEXANE LINE HOT TAPING WORK prepare the document and inspection of hot taping welding before, during and after inspection
Aug2006 to Jan2007
FYSAL MOHMAD QUATHANI AND SONS (FMQ)
Position: Welding Inspector
Project: HNRP to SGP to JGP Capacity Increase Gas Pipe line 28”& 24Inch. 270km (Saudi Armco project)
Client: Saudi Armco
Scope of c work:
Carried out QA/QC visual welding inspection.NDE inspections using RT.MT&PT Interpretation,
Evaluation and preparation of RT films and NDT report, involved in welder qualification tests and welding procedure qualification tests.
Carried out visual welding inspection in the line on the production welds.
Cairn Energy Pvt Limited: 3rd February 2006 – 30th Aug 2006.
Rawa Terminals, Work as WELDING INSPECTOR
East Godavari Dt., in ON-SHORE.
Witness Hydro test of Heat-Exchanger, Fin-Fan Coolers.
Witness Ultrasonic Testing.Carry Out Dimension Analysis
Involve in Corrosion Monitoring Inspection of Pipelines in Off-Shore and On-Shore using Torsion Waves.
Carried out QA/QC visual welding inspection.NDE inspections using RT.MT&PTInterpretation,
Evaluation and preparation of RT films and NDT report, involved in welder qualification tests and welding procedure qualification tests.
Carried out visual welding inspection in the line on the production welds.
Welding inspection of offshore and on shore pipe lines
Review the radiographic films,Witness of Eddy current testing
Carry out internal Inspection for Corrosion.
From 1st January 2006-30th January 2006
Employer: Industrial Quality Concept, Chennai, Tamil Nadu.
Position:
Client: Mettur Thermal Power Station
Scope of Work
Worked in Secluded Shutdown during RLA. During that Shutdown Carried out Visual Inspection of Boilers, Turbine Blades, Furnace, and Cooling Coils. Carried out NDE inspection of Boiler, Turbine, Water wall panels, Headers, Rotor and Pent house.
Carried out Hardness test and Dimensional Analysis of Boilers, Turbine, Furnace and Headers.
From Oct 2004 To Sept 2005
Employer: Sievert Inspection Partners LLC, Sultanate of Oman
Contractor: Punjlloyd Ltd
Client (Company): Petroleum Development of Oman (PDO)
Worked as Multi Discipline NDE and Visual Welding Inspector for Punjlloyd Ltd in their 48” Gas Export Line Project from Sai Nihayda to Sur (260 KM), a PDO Project.
Scope of Work:
Carried out QA/QC Visual Welding Inspections, NDE Inspections using RT, MT & PT,
Interpretation, Evaluation and Preparation of RT Films and all NDE Reports. Involved in welder qualification tests and welding procedure qualification tests. Carried out Visual Welding Inspection in the Line on the Production Welds.
From August 2004 to Sept 2004
Employer: Sievert India Pvt Ltd Mumbai
Contractor: ESSAR Constructions Ltd
Client (Company): Indian Oil Corporation
Project: Chennai To Madurai Pipeline (CTMPL)
Scope of Work:
Worked as Multi Discipline NDE & Visual Welding Inspector for ESSAR Constructions Ltd through Sievert India Pvt Ltd Mumbai, in their 12” to 38” Dia Crude Oil Pipe Line Project of IOC. Performed all NDE Inspections and also visual Welding Inspections on the production welds. Interpreted and Evaluated Radiographs and prepared NDE Reports. Coordinated with the NDE Crew and interfaced with the Client’s Inspection Team for the matters related to Quality Control and Inspections. Also involved in welders and welding procedure qualifications tests.
From Nov 2001 to Aug 2004
Employer: KGP Inspection Services, Coimbatore
Position: NDE Inspector
Scope of Work:
Worked as NDE Inspector in Salem Steel Plant Expansion Project. Carried out UT Thickness Gauging and Lamination Checks. Also carried out MPI and DPT on the fabricated Items.
From Oct 2000 to Sep 2001
Employer: Evergreen NDE Engineers, Trichy
Position: NDE Inspector
Scope of Work:
Worked as a NDT Technician for Evergreen NDT Engineers in various projects
Core Job Activities: UT Normal Beam Method on Rolled Products and Investigation of laminations, bonds, seams in raw materials and checking and verification of fusion zones in welded parts and Corrosion Survey and Thickness Gauging.
Castings: Testing of flanges, Bonnets and Tubing spools
Forged Components: Crank Shafts, Tie Rods, Oilfield Static & Rotary Components
Carried out UT Flaw Detection on the following Components:
Heavy thick boiler drum up to 750MW Capacity
Storage tanks, LPG Bullets, Heat exchangers and Piping
Gas, Oil Pipelines and welding plate testing
Involved in Interpretations, Evaluation of Radiographs and preparation of all the NDE Reports.
From June 1998 To Sept 2000
Employer: Sievert India Pvt Limited
Position: NDT Technician
Scope of Work: Carried out NDE Inspections using RT, UT, and MT & PT in various projects that were undertaken by Sievert India Pvt Ltd.
From Jan 1997 to May 1998
Employer: Saro Engineering Works, Thuvakudi, Trichy, Tamil Nadu, India
Position: Welding and Mechanical Supervisor
Scope of Work:
Involved in supervision of all the fabrication works using welding as primary method. Carried out in house Quality Inspections including Visual Welding Inspections on the fabricated components. Involved in the Fabrications of Boiler Accessories, Heat Exchanger Ducts, and Structures Etc. This was an ancillary unit of BHEL, Trichy. Coordinated with the NDE Crew to carry out the required NDE Tests as per Client Specs and approved IT&P. Interfaced / liaison with the Client Team in matters related to Quality.
Personal Profile:
Father’s Name : S.Krishnamoorthy
Date of Birth : 15.07.1976
Sex : Male
Marital Status : Unmarried
Driving : Dl No/TN/045/002422/2006
Passport Details
Passport No : F4255891
Date of Issue : 23rd JULY 2007
Date of Expiry : 22nd JULY 2017
Declaration: I here by declare that all the information given above are true and correct to the best of my knowledge and conscience.
Yours truly,
(K.SAMPATHKUMAR)
Place:
Date:
