AWS-Certified Welding Inspector (Certificate Number – 09051241)

CSWIP 3.1 - Welding Inspector (Waiting For Result)

API-510 – Pressure Vessel Inspector (Under Scheduled)

ASNT Level II - RT, UT, MT and PT as per SNT-TC-IA

Board of Technical Education. I.T.I in Electrical (1998 to 2000)
National Apprenticeship in BHEL. Electrical(2001 to 2002)

Anesh Engineering - QC Inspector/ NDT Specialist Oct’2007 To Till Date

Activities Performed:

 Raw material inspection, Certification & Attestation
 Check Welding Procedure Specification (WPS) & Procedure Qualification Record (PQR).
 Interpret drawings and other documents.
 Familiar with the base materials and consumable welding materials conform to the specifications and that welding filler metals used are as specified for material.
 Implementing welding procedures are as specified and qualified, and that the welding is performed as per applicable procedure.
 Following up the priority joints for required NDT as per procedure issued by the client.
 Monitoring the PWHT temperature and chart.
 Checking the weld and base metal composition using (Positive Material Identification) as per clients procedure.
 Verification and documentation ( test packs and quality plans)
 Review detailed quality control items and hold points in NDT and fabrication procedures.
 Including witness/ review Hydrostatic testing & NDE results and review of test packs.
 Witness welder’s qualification, issue respective cards and maintain qualification records.
 Verify records of Calibration, Inspection and Test equipment.
 Prepare reports and verify that records of the welding procedure, the welding procedure qualification, the welder’s welding operator’s and tack welder’s qualifications, the control of welding materials and the results of examinations are maintained.
 Checking for consistency with P & I.D, Piping Plan and Isometric Drawing as to size, rating and material.
 Responsible for the inspection of Pre- and Post-welding.


H.A. Husseini Inspection Company - Inspection/ NDT Specialist Mar’2007 To Aug’2007

Kingdom Of Saudi Arabia

 Functioned as:

• Multi Discipline Inspector (Welding/ NDT)
• NDE Coordinator and Senior RT Tech

 Handled key clients such as:

• Saudi Aramco – Petro Rabigh Refinery (Rabigh), Kufji joint operation (KJO).
• Sabic Group of Companies – SPC-Jubail, IBN Rusid-Yanbu.

 Involved in preparations of workout certifications and Aramco and Company In-house Examination schedules.





 Conducted inspection for SAW Piles piping Welding actives and NDT activities
Performed (Process plant activities):
• Internal, external inspection in vessels, tanks and On Stream Inspection (OSI) of Plant piping and other equipments (Furness, boilers, reactors and exts) in accordance with the company engineering requirements, applicable industry procedures, codes, and standards for condition assessment.
• NDT-UT- A, B SCANS Evaluation during piping inspection.
• Visual and NDT Verification for spheroid, spears, Storage tanks (Flour, Roof, Inner Pontoons, Outer pontoons) Inner and outer Tank.
• Marking and locating Percentage radiography Tanks and Equipments as per codes and specifications.
• Furness, Boiler tubes inspection during shutdowns and leakage. Monitoring and evaluate NDT, Heat treatment evaluation.
• Reactors scallops repair, alteration and inner and outer Inspection and NDT Evaluations.
• All Furness and Column piping PMI all welds, flanges, pipes.
 Involved in welding inspection and coordinated in Non-Destructive Examinations and Radiographic Film interpretation.
 Expertise in basic Practical and theoretical in ALL basic NDTmethods, Stress relieving, Hardness, PMI, Vacuum testing.
 Reviewed materials of construction to ensure that correct metallurgy is used as per engineering drawings and documentation using Positive Material Identification (PMI) methods.
 Ensured that work complies with Saudi Aramco Engineering Specifications, Standards and industry codes.
 Measured the surface profile on the abrasive blasted surface and measure stage wise WFT and DFT (from both electro magnetic and magnetic full of gauge) to ensure that all work complies as per specification.

PIH Services Me Ltd (QATAR) - Inspection/ NDT Specialist Feb’2006 To Aug’2006

 Conducted inspection for various clients such as CCC, RAS GAS Project
 Conducted Ultrasonic Inspection For CCC in their Hot Tap Lines @ RAS GAS Project
 Conducted Ultrasonic Inspection And Visual Inspection For CCC For Their Bab RAS GAS Project
 Conducted coordination in Non-Destructive Examinations.
 Interpreted Radiographic Film.

EVERGREEN NDT Engineering - Inspection/Coordinator (NDE) Oct’2002 To Jan’2006
India

 Performed Equipment inspection, Welding inspection and Coordination in Non-Destructive Examinations and Radiographic Film interpretation.
 Functioned as a NDT and Heat treatment technician as required by the client.
 Conducted inspection of Bank tubes with steam drum and mud drum expansion & witnessing of Hardness survey, Pre-weld Heat Treatment Post Weld Heat Treatment.
 Performed Endplate Headers and critical piping Radiography.
• (Pre-cleaning & Post Cleaning) of Shell, Tube Bundle, Tube Sheet, Channel Head, Battle Plate, and covers, muzzle Flange Serration etc (Visual).
• Tube to tube sheet Seal welding
• Bellows Type Expansion visual


 Involved in witnessing of:
• Hardness survey, Pre-weld Heat Treatment Post Weld Heat Treatment.
• Heat Exchanger Leak test, Pneumatic Test, and Hydro test.
 Performed marking and locating Percentage radiography Shell and Equipments as per codes and specifications.
 Involved in Furness, Boiler tubes inspection during shutdowns and leakage.

I'm a very hard worker, willing to learn and allways do my best at everything I do.