Welding Inspector& NDT Operator
NDT.org Member Since: 2009
Added: 10/22/2009
Last Updated: 10/22/2009
Last Updated: 10/22/2009
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
Country:
Iran
Status:
I am willing to Travel.
Currently working but always looking.
I am willing to work overseas.
I prefer permanent jobs.
Currently working but always looking.
I am willing to work overseas.
I prefer permanent jobs.
Certifications
CSWIP 3.1
UT ASNT LEVEL 2
RTI ASNT LEVEL 2
MT ASNT LEVEL 2
PT ASNT LEVEL 2
UT ASNT LEVEL 2
RTI ASNT LEVEL 2
MT ASNT LEVEL 2
PT ASNT LEVEL 2
Education
Bachelor degree in Material Engineering(metallurgist)
University of Shiraz ( Pahlavi University )
1998 –2003
University of Shiraz ( Pahlavi University )
1998 –2003
Experience
Oil Design and Construction Company (ODCC)
Aug 2007 - up to Now
Shazand Arak Refinery Expansion and Upgrading project (EPC)
SENIOR PIPING MATERIAL AND WELDING ENGINEER
Conducting material selection base on ASME B31.3 and API for Piping, Process and mechanical (Fix Equipment & Rotating Equipment).Preparation of deliverable list , supervising piping Material selection, Attending technical meeting with Vendor and client. Welding specialist engineer in Piping & material and welding Dept. Preparing WPS and approve PQR. Preparing NDT procedures and material take off (MTO) & Technical Bid Evaluation for all consumable and non-consumable materials. Evaluating vendor’s technical offers.
TECHINCO & RAVESH E NOVIN-THIRD PARTY INSPECTION CO.
Feb 2003-Aug 2007
SENIOR WELDING INSPECTOR
A-22 May 2007 till 13 Aug 2007
Welding inspector engineer for NARGAN & SAZEH Co. in Isfahan, ILAM & Pars petrochemical Projects.
B-15 Dec 2005 to 22 May 2007
Third party Welding inspector and material Engineer For National Iranian Oil Engineering and Construction Company’s(NIOEC)
Material and entry good inspector according to (ASME Sec II) (Bandar Abbas Refinery, Persian Golf)
C-3 Apr 2005 to 15 Des 2005
Third party Welding inspector and NDE operator for IRANIAN COPPER INDUSTRIAL Co.
Review and giving technical comments on client specifications & project specifications based on related standards. Preparing welding procedure specifications according to standards. Material engineer responsible for checking PQR . Preparing all final welding documents for inspection before, during & after welding . Preparing all NDT procedures (RT,UT,MT,PT)for project . Client inspector , radiographic interpreter and ultrasonic test supervisor according to (ASME Sec VIII & IX & ASME B 31.3 & API 1104)
D-10 May 2004 to 30 March 2005
Welding Inspector and NDT supervisor For IRAN MARIN INDUSTRIES project: Mobin Petrochemical Co.& Spherical vessels in JAM Petrochemical Co.
Radiographic interpreter in spherical vessel according to ASME Sec VIII. Ultrasonic test supervisor & visual welding inspector for IRAN MARIN INDUSTRIES Co . Interpreter of radiography films according to ASME Sec VIII. Third Party Welding inspector for visual inspection & dye Penetrant test inspection in suction elbows in HITACHI pumps according to ASME Sec VIII&IX (ASSALOUYEH PORT, PERSIAN GOLF).
E-20 Feb 2003 TO 4 May 2004
Visual Welding Inspector and NDT operator For Raveshe Novin Co.
Prepare, Review and make comments on different NDT procedures, Visually Inspection the welds, working as Interpreter for SATAK Co. & FANAVARANGHADER Co. Material engineer responsible for WQT and for laboratory DT tests according to ASME SEC V & VIII & IX & ASME B31.3.
F- Sep 2002 to Apr 2003
Third party inspector for radiographic Interpretation according to ASME sec VIII, for Takestan –Nargan co.
Verification of correctness welding consumables, dimensions, fit up and weld preparation sequence.
Dimensional check of completed weldment according specification requirements and drawings and visual inspection of the weld , interpretation of radiographs and surveillance during welding to verify compliance with specified procedure.
CAREER SYNOPSIS
Majid Mosalla studied material engineering in Shiraz(Pahlavi) University. He has 6 years experience in major Iranian oil and gas consultant engineering and inspection companies. He is professional in piping material selection and completely expert in welding engineering and inspection and Non-Destructive Testing such as Ultrasonic Test, Magnetic particle Inspection,Penetrant Test, Radiographic Interpretation. He is conversant with international standards such as ASME Sec.II & V & VIII & IX & B31.3 ,AWS D1.1, API 5L & 1104 and other standards like BS and DIN .
He has ability to navigate piping material and inspection team through project.
Majid Mosalla is single, resides in the Iran and communicates native language Persian and is good in English.
Aug 2007 - up to Now
Shazand Arak Refinery Expansion and Upgrading project (EPC)
SENIOR PIPING MATERIAL AND WELDING ENGINEER
Conducting material selection base on ASME B31.3 and API for Piping, Process and mechanical (Fix Equipment & Rotating Equipment).Preparation of deliverable list , supervising piping Material selection, Attending technical meeting with Vendor and client. Welding specialist engineer in Piping & material and welding Dept. Preparing WPS and approve PQR. Preparing NDT procedures and material take off (MTO) & Technical Bid Evaluation for all consumable and non-consumable materials. Evaluating vendor’s technical offers.
TECHINCO & RAVESH E NOVIN-THIRD PARTY INSPECTION CO.
Feb 2003-Aug 2007
SENIOR WELDING INSPECTOR
A-22 May 2007 till 13 Aug 2007
Welding inspector engineer for NARGAN & SAZEH Co. in Isfahan, ILAM & Pars petrochemical Projects.
B-15 Dec 2005 to 22 May 2007
Third party Welding inspector and material Engineer For National Iranian Oil Engineering and Construction Company’s(NIOEC)
Material and entry good inspector according to (ASME Sec II) (Bandar Abbas Refinery, Persian Golf)
C-3 Apr 2005 to 15 Des 2005
Third party Welding inspector and NDE operator for IRANIAN COPPER INDUSTRIAL Co.
Review and giving technical comments on client specifications & project specifications based on related standards. Preparing welding procedure specifications according to standards. Material engineer responsible for checking PQR . Preparing all final welding documents for inspection before, during & after welding . Preparing all NDT procedures (RT,UT,MT,PT)for project . Client inspector , radiographic interpreter and ultrasonic test supervisor according to (ASME Sec VIII & IX & ASME B 31.3 & API 1104)
D-10 May 2004 to 30 March 2005
Welding Inspector and NDT supervisor For IRAN MARIN INDUSTRIES project: Mobin Petrochemical Co.& Spherical vessels in JAM Petrochemical Co.
Radiographic interpreter in spherical vessel according to ASME Sec VIII. Ultrasonic test supervisor & visual welding inspector for IRAN MARIN INDUSTRIES Co . Interpreter of radiography films according to ASME Sec VIII. Third Party Welding inspector for visual inspection & dye Penetrant test inspection in suction elbows in HITACHI pumps according to ASME Sec VIII&IX (ASSALOUYEH PORT, PERSIAN GOLF).
E-20 Feb 2003 TO 4 May 2004
Visual Welding Inspector and NDT operator For Raveshe Novin Co.
Prepare, Review and make comments on different NDT procedures, Visually Inspection the welds, working as Interpreter for SATAK Co. & FANAVARANGHADER Co. Material engineer responsible for WQT and for laboratory DT tests according to ASME SEC V & VIII & IX & ASME B31.3.
F- Sep 2002 to Apr 2003
Third party inspector for radiographic Interpretation according to ASME sec VIII, for Takestan –Nargan co.
Verification of correctness welding consumables, dimensions, fit up and weld preparation sequence.
Dimensional check of completed weldment according specification requirements and drawings and visual inspection of the weld , interpretation of radiographs and surveillance during welding to verify compliance with specified procedure.
CAREER SYNOPSIS
Majid Mosalla studied material engineering in Shiraz(Pahlavi) University. He has 6 years experience in major Iranian oil and gas consultant engineering and inspection companies. He is professional in piping material selection and completely expert in welding engineering and inspection and Non-Destructive Testing such as Ultrasonic Test, Magnetic particle Inspection,Penetrant Test, Radiographic Interpretation. He is conversant with international standards such as ASME Sec.II & V & VIII & IX & B31.3 ,AWS D1.1, API 5L & 1104 and other standards like BS and DIN .
He has ability to navigate piping material and inspection team through project.
Majid Mosalla is single, resides in the Iran and communicates native language Persian and is good in English.
Comments
Dear Sir/Madam
because for some of below reasons, I am interested in working in an International Co.:
I am really interested in meeting challenges in my work
I would like to take up new responsibilities other than I have ever had.
I am real keen on learning more technical matters from highly experts in my office and I would like to working multi- national countries & from integrate projects.
PUBLICATION and PAPERS
BOOK
NON DESTRUCTIVE TESTS IN WELDING (ISBN 987-964-2917-03-7) – Translation
PAPERS
A-STUDYING CORROSION OF COATED TITANIUM ANODES IN A CORROSIVE SOLUTION (1ST EUROUPEAN CHEMISTRY CONGRESS)
B-INVESTIGATION OF CORROSION WITH MATERIAL SELECTION IN FLUE GAS DESULPHURIZATION & WASTE INCINERATION SYSTEMS . #163-POSTER SESSION: MATERIALS ENGINEERING AND SCIENCES DIVISION (08001)(AIChE 2006).
C-ENERGY STORAGE BY MODELING A COOLOING SYSTEM. SESSION #110 - SUSTAINABLE ENERGY (TE001)
(AIChE 2007).
D-BIOSYNTHESIS OF THE ACID BY A NEW TECHNOLOGY AND BIOREACTORS . SESSION: SHORTCUT METHODOLOGY IN PILOT PLANTS.(AIChE 2009)
because for some of below reasons, I am interested in working in an International Co.:
I am really interested in meeting challenges in my work
I would like to take up new responsibilities other than I have ever had.
I am real keen on learning more technical matters from highly experts in my office and I would like to working multi- national countries & from integrate projects.
PUBLICATION and PAPERS
BOOK
NON DESTRUCTIVE TESTS IN WELDING (ISBN 987-964-2917-03-7) – Translation
PAPERS
A-STUDYING CORROSION OF COATED TITANIUM ANODES IN A CORROSIVE SOLUTION (1ST EUROUPEAN CHEMISTRY CONGRESS)
B-INVESTIGATION OF CORROSION WITH MATERIAL SELECTION IN FLUE GAS DESULPHURIZATION & WASTE INCINERATION SYSTEMS . #163-POSTER SESSION: MATERIALS ENGINEERING AND SCIENCES DIVISION (08001)(AIChE 2006).
C-ENERGY STORAGE BY MODELING A COOLOING SYSTEM. SESSION #110 - SUSTAINABLE ENERGY (TE001)
(AIChE 2007).
D-BIOSYNTHESIS OF THE ACID BY A NEW TECHNOLOGY AND BIOREACTORS . SESSION: SHORTCUT METHODOLOGY IN PILOT PLANTS.(AIChE 2009)
