NDT Quality Control Level II Technician
NDT.org Member Since: 2010
Added: 3/6/2010
Last Updated: 3/6/2010
Last Updated: 3/6/2010
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
OH Ohio
Country:
United States
Status:
Currently working but always looking.
I prefer permanent jobs.
I prefer permanent jobs.
Certifications
ASNT-TC-1A Certified Level II MT-UT-PT .
Education
*13-Years NDT ASNT-TC-1A Certified Level II MT-UT-PT.
*Associates Degree-Computer Programming and Applied Sciences , Mackie Brown College-Akron, OH. (02/02-12/03) GPA 3.83.
*Certification-Diploma in Computer Operations, Computer Learning Center-Springfield, VA. (10/88-04/89) GPA 3.92.
*Business Management and Applied Science, 64 Credits; U.S. Air Force-Washington DC-Department of Defense (04/89-01/92).
*Business Management/Computer Science, 28 credits, Akron University, Akron, OH (08/80-04/81).
*Associates Degree-Computer Programming and Applied Sciences , Mackie Brown College-Akron, OH. (02/02-12/03) GPA 3.83.
*Certification-Diploma in Computer Operations, Computer Learning Center-Springfield, VA. (10/88-04/89) GPA 3.92.
*Business Management and Applied Science, 64 Credits; U.S. Air Force-Washington DC-Department of Defense (04/89-01/92).
*Business Management/Computer Science, 28 credits, Akron University, Akron, OH (08/80-04/81).
Experience
EDUCATION:
*13-Years NDT MT Level II, PT Level II/UT Level II Experience.
*Associates Degree-Computer Science, Mackie Brown College-Akron, OH. (02/02-12/03) GPA 3.83.
*Certification-Diploma in Computer Operations, Computer Learning Center-Springfield, VA. (10/88-04/89) GPA 3.92.
*Business Management and Applied Science, 64 Credits; U.S. Air Force-Washington DC-Department of Defense (04/89-01/92).
*Business Management/Computer Science, 28 credits, Akron University, Akron, OH (08/80-04/81).
SKILLS/TRAINING:
13-Years NDT Quality Control/Assurance and ASNT-TC-1A Certified Level II MT (Yoke, Prods, Stationary equipment using Wet Fluorescent, Dry Powder Methods) Level II PT (Red Dye and Wet Fluorescent Methods), Level II/UT (Shear Wave/Straight Beam Techniques). Working knowledge of AWS, ASNT, API 1104 (Welding of Pipelines and Related Facilities - 20th Edition ), Familiar with API 1104 Welding Code. Magnetic Particle Inspected (Red Powder Yoke Method) above ground pressure Vessel petroleum tanks. Familiar with ASTM International Designation: E 1444—05/E 1417-05/E 165-02/E 1901-97/E 495/ and Procedures and Regulations. Experience using calipers, micrometers, electronic thickness meters and various welding gauges for precise weld and dimensional measurements. Diversity training; Alstom blueprint reading; MSDS Training; Communication skills and preparing Technique Card processing procedures. Over 10 years’ management and supervisory experience. 3 years inventory management experience. Over 10 year’s computer skills experience ( Data Base, Excel, Word, , Access and Networking .
EXPERIENCE:
Quality Control Inventory Management/ASNT-TC-1A Certified NDT Level II Technician:
Loveman Steel Corporation (05-27-09 – Present):
I was hired in at the Loveman Steel Corporation to establish and manage the Quality Control Non-Destructive Testing Inspection program which involved creating the company’s NDT quality control processes-methods, procedures and specification criteria’s that was required to be followed. I single handedly, perform the UT/MPI/LPI NDT Inspections. This saves the company a substantial expense they were spending on outside NDT Inspection contractors. I also streamlined the NDT Reports by creating an electronic UT/LPI/MPI inspection report (form) excel database filing system, which could be easily accessed and converted to a hardcopy NDT report when requested by a customer or upper management. Furthermore, I review all Mill Test Reports for the proper steel plate chemistry, brinnell hardness, tensile strength and heat treating. I manage and maintain mill test reports certifications in an electronic filing database and cross reference hardcopy filing system.
Moreover, I was also hired in a Loveman Steel Corporation to manage the incoming and outgoing steel plate inventory system which was previously at the time inadequate in tracking the steel plate inventory. I established a system which would entailed stocking in incoming plates by having specifically assigned personnel measuring the actual thickness with a digital micrometer; along with, measuring the actual width and length of every plate. Once the dimensions of each plate are measured, an individual plate number would be assigned to that plate(s). Then those particular assigned personnel would submit a receiving inventory control ticket to me for entering this information in our inventory control electronic data base system. After this information was entered electronically, the hardcopy receiving ticket was filed in the file cabinet system for cross reference (back-up) in case of any inaccurate data was received on the inventory ticket. Once any inventory plate was burned or cut on, reducing the size of that particular plate, it would be recorded on special processing ticket, that particular ticket would be submitted to me for reduction in the quality control electronic database inventory system; along with, the processing ticket (hardcopy) being filed in the inventory filing cabinet for future reference if needed. This more accurate accountability plate inventory system saves the company money by knowing exactly was in stock in order to except customer orders and knowing when to re-order more inventory for that particular thickness, width and length needed for future orders.
NDT Level II Quality Control/Management/ Technician:
Hodge Foundry, Inc. (09/2008 – 05/2009):
Performed NDT (Non-Destructive Tester) quality control checks using magnetic particle testing, Liquid Penetrate testing, Ultrasonic testing on Ductile Iron forgings meeting timely deadlines with zero defects in an ISO 9002 environment, moreover, supervised other employees that performed the prep work for final inspection.
ASNT-TC-1A Certified NDE LEVEL II QC Quality Control Management/ Technician:
Union Metal Corporation, Canton, Ohio (07/2006) – (09/2008):
ASNT-TC-1A Certified NDT Level II (UT-PT-MT). Perform NDT NADCAP daily processing equipment testing in an ISO environment. Use ASNT, AMS 2641 and ASTM International Designation: E1444-01 Procedure documents and API 1104/D1.1 Welding Codes. Manage production quality control and quality assurance inspections (Steal Light Poles) using NDT MT/PT/UT/VT methods. Created and updated Quality Control databases/spreadsheets. I‘m familiar with various weld processes and procedures. Managed and trained repair welders on proper work procedure instructions. Interpret engineering drawings/blueprints and standards assuring correct procedures are followed. Use calipers, micrometers, electronic thickness meters and various welding gauges for precise weld and dimensional measurements on a daily basis. Work directly with engineers dealing with their design drawings for accuracy visual dimensional inspections of Union Metal’s light pole and Cell Tower assemblies and attachments. Perform weld seam plug sample readings using the acid etching technique. Report any quality issues to upper management needing addressed. Directed and managed welders daily work assignments. Inspected the quality of finished welded pole assemblies using the appropriate NDT methods specified in the customer(s) criteria.
ASNT-TC-1A Certified NDT Level II Senior Lab Technician:
XRI Testing Inc., Independence, Ohio (02/2006 – 07/2006):
Managed lab information databases while assisting the ASNT-TC-1A Certified Level III MT/PT/UT Manager. Also perform Quality Control Inspections, calibration performance checks, generated and ensured current Job Techniques procedures were being followed. Managed and controlled the MT/PT/UT 90-Day Job Technique Reviews. Performed inspections of castings, and provided results and reports accordingly. Also, performed local field jobs using the specified NDT method. Performed visual inspections to required standards. Generated inspection quality control reports and entered the status into the NDT database system. Assured that upper management or customers are notified of non-conforming conditions. Completed special tests and projects as assigned in a timely manner. Taken hardness readings. Completed dimensional inspections ensuring that the product(s) met the customer’s specification criteria, using blue prints/and engineering drawings. Effectively communicated end result with other involved departmental heads.
ASNT-TC-1A Certified NDT Level II Quality Control Technician:
Canton Drop Forge, Inc., Canton, Ohio (11/1999 –02/2006):
Performed NDT quality control checks using Magnetic particle testing, Liquid Penetrate testing and Ultrasonic testing meeting timely deadlines according to the required specification. Helped increased company production by 20%. In a Performed inventory audits verifying accountability of company items. Perform NDT NADCAP daily processing equipment testing in an ISO 9002 environment. Use ASNT, AMS 2641 and ASTM International Designation: E1444-01 Procedure documents when needed. Help train and managed new entry -level technicians. I attended and graduated from Mackie Brown College while working at Canton Drop Forge, Inc.
**(Mandatory for College Graduation at Mackie Brown College)**
National Inventors Hall of Fame, Akron, Ohio (10/2003 - 12/2003):
Database Systems Administrative Management Externship:
(Mandatory for College Graduation at Mackie Brown College):
Created, set-up, updated order tables, effectively ran, and printed reports, tables, and queries meeting company deadlines. Backed up and restored databases; compacted and repaired databases; created, previewed and printed reports. Managed relational databases; defined fields, and organized table databases in design view enhancing better record data entry. I used and written Visual Basic for application code. Used query wizards, action queries, and briefcase replications and automated tasks with macros. Communicated any database problems saving on lost down time.
**(1992 to 1999 ): Unrelated Professional Retail Management and Sales Work.**
**U.S. AIR FORCE 10 YEAR VETERAN(ALSO SERVED DURING DESERT STORM)**
Computer Information Management Technician (10/1988 – 01/1992):
Pentagon, Washington, DC.
I managed the Pentagon’s Directorate of Executives Division/Plans & Operations Computer Information Systems Top Secret Control Accounts.
Classified Documentation Security Computer Information Technology Duties. (1985 – 1988).
Bolling AFB, Washington, DC.
Classified Documentation Security Computer Information Technology Duties. (1984 – 1985):
Goodfellow AFB, San Angelo, Texas.
Classified Documentation Security Computer Information Technology Duties. (1982 – 1984):
Wheeler AFB, Hawaii.
*13-Years NDT MT Level II, PT Level II/UT Level II Experience.
*Associates Degree-Computer Science, Mackie Brown College-Akron, OH. (02/02-12/03) GPA 3.83.
*Certification-Diploma in Computer Operations, Computer Learning Center-Springfield, VA. (10/88-04/89) GPA 3.92.
*Business Management and Applied Science, 64 Credits; U.S. Air Force-Washington DC-Department of Defense (04/89-01/92).
*Business Management/Computer Science, 28 credits, Akron University, Akron, OH (08/80-04/81).
SKILLS/TRAINING:
13-Years NDT Quality Control/Assurance and ASNT-TC-1A Certified Level II MT (Yoke, Prods, Stationary equipment using Wet Fluorescent, Dry Powder Methods) Level II PT (Red Dye and Wet Fluorescent Methods), Level II/UT (Shear Wave/Straight Beam Techniques). Working knowledge of AWS, ASNT, API 1104 (Welding of Pipelines and Related Facilities - 20th Edition ), Familiar with API 1104 Welding Code. Magnetic Particle Inspected (Red Powder Yoke Method) above ground pressure Vessel petroleum tanks. Familiar with ASTM International Designation: E 1444—05/E 1417-05/E 165-02/E 1901-97/E 495/ and Procedures and Regulations. Experience using calipers, micrometers, electronic thickness meters and various welding gauges for precise weld and dimensional measurements. Diversity training; Alstom blueprint reading; MSDS Training; Communication skills and preparing Technique Card processing procedures. Over 10 years’ management and supervisory experience. 3 years inventory management experience. Over 10 year’s computer skills experience ( Data Base, Excel, Word, , Access and Networking .
EXPERIENCE:
Quality Control Inventory Management/ASNT-TC-1A Certified NDT Level II Technician:
Loveman Steel Corporation (05-27-09 – Present):
I was hired in at the Loveman Steel Corporation to establish and manage the Quality Control Non-Destructive Testing Inspection program which involved creating the company’s NDT quality control processes-methods, procedures and specification criteria’s that was required to be followed. I single handedly, perform the UT/MPI/LPI NDT Inspections. This saves the company a substantial expense they were spending on outside NDT Inspection contractors. I also streamlined the NDT Reports by creating an electronic UT/LPI/MPI inspection report (form) excel database filing system, which could be easily accessed and converted to a hardcopy NDT report when requested by a customer or upper management. Furthermore, I review all Mill Test Reports for the proper steel plate chemistry, brinnell hardness, tensile strength and heat treating. I manage and maintain mill test reports certifications in an electronic filing database and cross reference hardcopy filing system.
Moreover, I was also hired in a Loveman Steel Corporation to manage the incoming and outgoing steel plate inventory system which was previously at the time inadequate in tracking the steel plate inventory. I established a system which would entailed stocking in incoming plates by having specifically assigned personnel measuring the actual thickness with a digital micrometer; along with, measuring the actual width and length of every plate. Once the dimensions of each plate are measured, an individual plate number would be assigned to that plate(s). Then those particular assigned personnel would submit a receiving inventory control ticket to me for entering this information in our inventory control electronic data base system. After this information was entered electronically, the hardcopy receiving ticket was filed in the file cabinet system for cross reference (back-up) in case of any inaccurate data was received on the inventory ticket. Once any inventory plate was burned or cut on, reducing the size of that particular plate, it would be recorded on special processing ticket, that particular ticket would be submitted to me for reduction in the quality control electronic database inventory system; along with, the processing ticket (hardcopy) being filed in the inventory filing cabinet for future reference if needed. This more accurate accountability plate inventory system saves the company money by knowing exactly was in stock in order to except customer orders and knowing when to re-order more inventory for that particular thickness, width and length needed for future orders.
NDT Level II Quality Control/Management/ Technician:
Hodge Foundry, Inc. (09/2008 – 05/2009):
Performed NDT (Non-Destructive Tester) quality control checks using magnetic particle testing, Liquid Penetrate testing, Ultrasonic testing on Ductile Iron forgings meeting timely deadlines with zero defects in an ISO 9002 environment, moreover, supervised other employees that performed the prep work for final inspection.
ASNT-TC-1A Certified NDE LEVEL II QC Quality Control Management/ Technician:
Union Metal Corporation, Canton, Ohio (07/2006) – (09/2008):
ASNT-TC-1A Certified NDT Level II (UT-PT-MT). Perform NDT NADCAP daily processing equipment testing in an ISO environment. Use ASNT, AMS 2641 and ASTM International Designation: E1444-01 Procedure documents and API 1104/D1.1 Welding Codes. Manage production quality control and quality assurance inspections (Steal Light Poles) using NDT MT/PT/UT/VT methods. Created and updated Quality Control databases/spreadsheets. I‘m familiar with various weld processes and procedures. Managed and trained repair welders on proper work procedure instructions. Interpret engineering drawings/blueprints and standards assuring correct procedures are followed. Use calipers, micrometers, electronic thickness meters and various welding gauges for precise weld and dimensional measurements on a daily basis. Work directly with engineers dealing with their design drawings for accuracy visual dimensional inspections of Union Metal’s light pole and Cell Tower assemblies and attachments. Perform weld seam plug sample readings using the acid etching technique. Report any quality issues to upper management needing addressed. Directed and managed welders daily work assignments. Inspected the quality of finished welded pole assemblies using the appropriate NDT methods specified in the customer(s) criteria.
ASNT-TC-1A Certified NDT Level II Senior Lab Technician:
XRI Testing Inc., Independence, Ohio (02/2006 – 07/2006):
Managed lab information databases while assisting the ASNT-TC-1A Certified Level III MT/PT/UT Manager. Also perform Quality Control Inspections, calibration performance checks, generated and ensured current Job Techniques procedures were being followed. Managed and controlled the MT/PT/UT 90-Day Job Technique Reviews. Performed inspections of castings, and provided results and reports accordingly. Also, performed local field jobs using the specified NDT method. Performed visual inspections to required standards. Generated inspection quality control reports and entered the status into the NDT database system. Assured that upper management or customers are notified of non-conforming conditions. Completed special tests and projects as assigned in a timely manner. Taken hardness readings. Completed dimensional inspections ensuring that the product(s) met the customer’s specification criteria, using blue prints/and engineering drawings. Effectively communicated end result with other involved departmental heads.
ASNT-TC-1A Certified NDT Level II Quality Control Technician:
Canton Drop Forge, Inc., Canton, Ohio (11/1999 –02/2006):
Performed NDT quality control checks using Magnetic particle testing, Liquid Penetrate testing and Ultrasonic testing meeting timely deadlines according to the required specification. Helped increased company production by 20%. In a Performed inventory audits verifying accountability of company items. Perform NDT NADCAP daily processing equipment testing in an ISO 9002 environment. Use ASNT, AMS 2641 and ASTM International Designation: E1444-01 Procedure documents when needed. Help train and managed new entry -level technicians. I attended and graduated from Mackie Brown College while working at Canton Drop Forge, Inc.
**(Mandatory for College Graduation at Mackie Brown College)**
National Inventors Hall of Fame, Akron, Ohio (10/2003 - 12/2003):
Database Systems Administrative Management Externship:
(Mandatory for College Graduation at Mackie Brown College):
Created, set-up, updated order tables, effectively ran, and printed reports, tables, and queries meeting company deadlines. Backed up and restored databases; compacted and repaired databases; created, previewed and printed reports. Managed relational databases; defined fields, and organized table databases in design view enhancing better record data entry. I used and written Visual Basic for application code. Used query wizards, action queries, and briefcase replications and automated tasks with macros. Communicated any database problems saving on lost down time.
**(1992 to 1999 ): Unrelated Professional Retail Management and Sales Work.**
**U.S. AIR FORCE 10 YEAR VETERAN(ALSO SERVED DURING DESERT STORM)**
Computer Information Management Technician (10/1988 – 01/1992):
Pentagon, Washington, DC.
I managed the Pentagon’s Directorate of Executives Division/Plans & Operations Computer Information Systems Top Secret Control Accounts.
Classified Documentation Security Computer Information Technology Duties. (1985 – 1988).
Bolling AFB, Washington, DC.
Classified Documentation Security Computer Information Technology Duties. (1984 – 1985):
Goodfellow AFB, San Angelo, Texas.
Classified Documentation Security Computer Information Technology Duties. (1982 – 1984):
Wheeler AFB, Hawaii.
Comments
The benefits I have to offer your organization are 13 years NDT Quality Control-Assurance and ASNT-TC-1A Certified Level II MT-UT-PT Management and NDT inspection on-hands work experience; moreover, Business Management, Supervisory work experience.
