CAWI / LEVEL II INSPECTOR
NDT.org Member Since: 2010
Added: 6/20/2010
Last Updated: 6/20/2010
Last Updated: 6/20/2010
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
TX Texas
Country:
United States
Status:
Certifications
AMERICAN WELDING SOCIETY-CERTIFIED ASSOCIATE WELDING
INSPECTOR:
AWS CERTIFICATION #09100494
NDT LEVEL II VT,MT,PT,UT-LONGITUTAL
DIMENSIONAL INSPECTOR
MAGNETIC INDUCTION TESTING INSPECTOR
INSPECTOR:
AWS CERTIFICATION #09100494
NDT LEVEL II VT,MT,PT,UT-LONGITUTAL
DIMENSIONAL INSPECTOR
MAGNETIC INDUCTION TESTING INSPECTOR
Education
The Ocean Corporation, Houston, Texas
ASNT Level II Academic and Level I Practical in:
40 hrs. Visual I, II, III and Leak Testing
55 hrs. Penetrant Testing (Visible and Fluorescent)
70 hrs. Magnetic Particle Testing (Visible and Fluorescent)
115 hrs. Ultrasonic Testing (Angle, Straight Beam and
Shear wave)
85 hrs. Eddy Current Testing
90 hrs. Radiographic Testing
40 hrs. Radiation Safety (NRC)
60 hrs. Welding Techniques
30 hrs. Rigging Techniques
60 hrs. Hazardous Material and Confined Work Place Safety
Practice Emergency Response
AMERICAN WELDING SOCIETY-CERTIFIED WELDING INSPECTOR SEMINAR
40HRS
7/12/2009-7/17/2009
ASNT Level II Academic and Level I Practical in:
40 hrs. Visual I, II, III and Leak Testing
55 hrs. Penetrant Testing (Visible and Fluorescent)
70 hrs. Magnetic Particle Testing (Visible and Fluorescent)
115 hrs. Ultrasonic Testing (Angle, Straight Beam and
Shear wave)
85 hrs. Eddy Current Testing
90 hrs. Radiographic Testing
40 hrs. Radiation Safety (NRC)
60 hrs. Welding Techniques
30 hrs. Rigging Techniques
60 hrs. Hazardous Material and Confined Work Place Safety
Practice Emergency Response
AMERICAN WELDING SOCIETY-CERTIFIED WELDING INSPECTOR SEMINAR
40HRS
7/12/2009-7/17/2009
Experience
EMPLOYMENT HISTORY:
NDE Quality Systems Inc, Houston, Texas
6/2010-Present
Quality Control Inspector
• Third Party/Customer Witness Inspecting assembly and
assembled oil & gas equipment.
• Inspection of welds and welding processes on oil and
gas equipment to API 1104 standards.
• Monitoring of Blast and Coating operations on oil &
gas equipment.
• Verifying serialization marking on oil & gas
equipment.
• Monitoring of heat treatment of industrial welds on
oil and gas equipment.
• Report writing and documentation of customer witness
inspection work.
• Monitoring and verifying NDE inspection operations
on oil & gas equipment are performed correctly.
• Verifying dimensional tolerances of oil & gas
equipment.
Oderco Oil Equipment LLC, Abu Dhabi, United Arabs Emirates
2/2010- 6/2010
QC/QA Inspector
• Monitoring QC activities according to the
requirements of the quality plan and the inspection & test
plans.
• Conducting receiving inspection of raw material for
offshore drilling equipment per the certification
documentation.
• Inspection of offshore drilling equipment, welds and
welding processes on oil and gas equipment to API 1104 and
D1.1 standards.
• Verifying serialization and traceability marking on
offshore drilling and oil & gas equipment.
• Monitoring of heat treatment of industrial welds on
drilling and oil and gas equipment.
• Report writing and documentation of customer witness
inspection work.
• Verifying dimensional tolerances of drilling and oil
& gas equipment per engineering drawings.
• Monitoring and verifying that the NDE inspection
operations on drilling and oil & gas equipment are performed
per quality requirements.
• Generating traceability documentation of drilling
and Oil & Gas Equipment.
• Generating daily and weekly reports on all
production activity.
• Monitoring the rigging and erecting of derrick for
offshore drilling.
NDE Quality Systems Inc, Houston, Texas
12/2009-2/2010
Quality Control Inspector
• Third Party/Customer Witness Inspecting assembly and
assembled oil & gas equipment.
• Inspection of welds and welding processes on oil and
gas equipment to API 1104 standards.
• Monitoring of Blast and Coating operations on oil &
gas equipment.
• Verifying serialization marking on oil & gas
equipment.
• Monitoring of heat treatment of industrial welds on
oil and gas equipment.
• Report writing and documentation of customer witness
inspection work.
• Monitoring and verifying NDE inspection operations
on oil & gas equipment are performed correctly.
• Verifying dimensional tolerances of oil & gas
equipment.
General Electric/Vetco Gray Inc, Houston, Texas
11/2005 – 5/2009
Quality Control/NDT Inspector
• Inspection of HMF-G & MR-6E subsea riser assemblies.
• Traceability and Post-in documentation of subsea
riser assemblies.
• Dimensional inspection of HMF-G risers, MR-6E
risers, industrial valve bodies and valve body internal
parts.
• Non-Conformance report writing and documentation of
industrial valve bodies and parts.
• MT – work with the Magnaflux ARQ-968 stationary
magnetic particle machine inspecting industrial valve
bodies.
• MT – work with a magnetic particle yoke inspecting
industrial welds and on valves.
• Conducting brinnell hardness readings using the King
Testers portable and stationary
Models. Also conducting Rockwell hardness on
industrial valve bodies.
• PT – work with magnaflux skl-wp doing inspections on
industrial valves and welds.
• Magnetic induction testing of cladded surfaces on
valves bodies.
• Receiving inspection of industrial valves and
components.
• Also worked with Ultrasonic & Phased Array equipment
inspecting welds on industrial pipe.
• Monitored assembly and testing of valve bodies and
valve actuators according to API 598,600,602,603 and ASTM
standards.
Team MQS inspection, Woodriver, Illinois (Conoco Phillips
Turnaround)
09/2005 – 11/2005
NDT Inspector
• ET- I worked with ACFM using the amigo, model # 247
inspecting industrial welds.
• RT- I worked with the Innovex System, model # CX-
2000A conducting PMI
Inspections on industrial pipe.
• PT- I worked with sp1 visible and fluorescent wet
penetrant inspecting industrial welds.
• MT- I worked with contour probe, using 14am prepared
bath fluorescent inspecting industrial welds.
• UT- I worked with a panametrics 36dl plus conducting
thickness reading Inspections on industrial pipe.
• Also conducted brinnell hardness reading Inspections
on industrial pipe.
• Worked with isometric drawings walking down pipe and
components for inspections.
H&G Inspection, Houston, Texas
06/2005- 08/2005
NDT Inspector
• PT- I worked with sp1 visible and fluorescent wet
penetrant inspecting industrial welds.
• MT- I worked with a contour probe yoke, using dry
powder and 14am prepared bath,
• Visible and fluorescent inspecting industrial welds.
• UT- I worked with a panametrics 36dl plus conducting
thickness reading Inspections on industrial pipe.
• RT- I worked with Iridium 192, using AFGA D7, D5, D4
& D3 film inspecting industrial welds.
• Worked at BP Texas City, texas using isometric
drawings to walk pipe for conducting thickness Reading
inspections on industrial pipe.
NDE Quality Systems Inc, Houston, Texas
6/2010-Present
Quality Control Inspector
• Third Party/Customer Witness Inspecting assembly and
assembled oil & gas equipment.
• Inspection of welds and welding processes on oil and
gas equipment to API 1104 standards.
• Monitoring of Blast and Coating operations on oil &
gas equipment.
• Verifying serialization marking on oil & gas
equipment.
• Monitoring of heat treatment of industrial welds on
oil and gas equipment.
• Report writing and documentation of customer witness
inspection work.
• Monitoring and verifying NDE inspection operations
on oil & gas equipment are performed correctly.
• Verifying dimensional tolerances of oil & gas
equipment.
Oderco Oil Equipment LLC, Abu Dhabi, United Arabs Emirates
2/2010- 6/2010
QC/QA Inspector
• Monitoring QC activities according to the
requirements of the quality plan and the inspection & test
plans.
• Conducting receiving inspection of raw material for
offshore drilling equipment per the certification
documentation.
• Inspection of offshore drilling equipment, welds and
welding processes on oil and gas equipment to API 1104 and
D1.1 standards.
• Verifying serialization and traceability marking on
offshore drilling and oil & gas equipment.
• Monitoring of heat treatment of industrial welds on
drilling and oil and gas equipment.
• Report writing and documentation of customer witness
inspection work.
• Verifying dimensional tolerances of drilling and oil
& gas equipment per engineering drawings.
• Monitoring and verifying that the NDE inspection
operations on drilling and oil & gas equipment are performed
per quality requirements.
• Generating traceability documentation of drilling
and Oil & Gas Equipment.
• Generating daily and weekly reports on all
production activity.
• Monitoring the rigging and erecting of derrick for
offshore drilling.
NDE Quality Systems Inc, Houston, Texas
12/2009-2/2010
Quality Control Inspector
• Third Party/Customer Witness Inspecting assembly and
assembled oil & gas equipment.
• Inspection of welds and welding processes on oil and
gas equipment to API 1104 standards.
• Monitoring of Blast and Coating operations on oil &
gas equipment.
• Verifying serialization marking on oil & gas
equipment.
• Monitoring of heat treatment of industrial welds on
oil and gas equipment.
• Report writing and documentation of customer witness
inspection work.
• Monitoring and verifying NDE inspection operations
on oil & gas equipment are performed correctly.
• Verifying dimensional tolerances of oil & gas
equipment.
General Electric/Vetco Gray Inc, Houston, Texas
11/2005 – 5/2009
Quality Control/NDT Inspector
• Inspection of HMF-G & MR-6E subsea riser assemblies.
• Traceability and Post-in documentation of subsea
riser assemblies.
• Dimensional inspection of HMF-G risers, MR-6E
risers, industrial valve bodies and valve body internal
parts.
• Non-Conformance report writing and documentation of
industrial valve bodies and parts.
• MT – work with the Magnaflux ARQ-968 stationary
magnetic particle machine inspecting industrial valve
bodies.
• MT – work with a magnetic particle yoke inspecting
industrial welds and on valves.
• Conducting brinnell hardness readings using the King
Testers portable and stationary
Models. Also conducting Rockwell hardness on
industrial valve bodies.
• PT – work with magnaflux skl-wp doing inspections on
industrial valves and welds.
• Magnetic induction testing of cladded surfaces on
valves bodies.
• Receiving inspection of industrial valves and
components.
• Also worked with Ultrasonic & Phased Array equipment
inspecting welds on industrial pipe.
• Monitored assembly and testing of valve bodies and
valve actuators according to API 598,600,602,603 and ASTM
standards.
Team MQS inspection, Woodriver, Illinois (Conoco Phillips
Turnaround)
09/2005 – 11/2005
NDT Inspector
• ET- I worked with ACFM using the amigo, model # 247
inspecting industrial welds.
• RT- I worked with the Innovex System, model # CX-
2000A conducting PMI
Inspections on industrial pipe.
• PT- I worked with sp1 visible and fluorescent wet
penetrant inspecting industrial welds.
• MT- I worked with contour probe, using 14am prepared
bath fluorescent inspecting industrial welds.
• UT- I worked with a panametrics 36dl plus conducting
thickness reading Inspections on industrial pipe.
• Also conducted brinnell hardness reading Inspections
on industrial pipe.
• Worked with isometric drawings walking down pipe and
components for inspections.
H&G Inspection, Houston, Texas
06/2005- 08/2005
NDT Inspector
• PT- I worked with sp1 visible and fluorescent wet
penetrant inspecting industrial welds.
• MT- I worked with a contour probe yoke, using dry
powder and 14am prepared bath,
• Visible and fluorescent inspecting industrial welds.
• UT- I worked with a panametrics 36dl plus conducting
thickness reading Inspections on industrial pipe.
• RT- I worked with Iridium 192, using AFGA D7, D5, D4
& D3 film inspecting industrial welds.
• Worked at BP Texas City, texas using isometric
drawings to walk pipe for conducting thickness Reading
inspections on industrial pipe.
Comments
Skilled and knowledgeable in the use of Dimensional
measuring tools and equipment, Dimensional Inspection,
Reading Isometric Drawings, Engineering Drawings, setup &
calibration of inspection equipment, and able to make sound
decisions using VT, PT, MT, UT, ET, and RT; Trained in first
aid, ROV and Hazwoper; Have an understanding of rigging,
well organized, excellent interpersonal skills along with
superior report writing ability; Self motivator and starter,
effectively works well with others and work excellent with
or without supervision.
ACHIEVEMENTS: U.S. Army Service in South West Asia during
Operation Desert Shield/Desert Storm. Army Service Ribbon;
National Defense Service Medal; Good Conduct Medal; Overseas
Service Ribbon; South West Asia Service Medal With 2 Bronze
Stars.
measuring tools and equipment, Dimensional Inspection,
Reading Isometric Drawings, Engineering Drawings, setup &
calibration of inspection equipment, and able to make sound
decisions using VT, PT, MT, UT, ET, and RT; Trained in first
aid, ROV and Hazwoper; Have an understanding of rigging,
well organized, excellent interpersonal skills along with
superior report writing ability; Self motivator and starter,
effectively works well with others and work excellent with
or without supervision.
ACHIEVEMENTS: U.S. Army Service in South West Asia during
Operation Desert Shield/Desert Storm. Army Service Ribbon;
National Defense Service Medal; Good Conduct Medal; Overseas
Service Ribbon; South West Asia Service Medal With 2 Bronze
Stars.
