NDT Level 2 Technician
NDT.org Member Since: 2010
Added: 6/28/2010
Last Updated: 6/28/2010
Last Updated: 6/28/2010
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
Country:
India
Status:
Certifications
ASNT Level II Certified in Non- Destructive Testing (NDT)
1 Ultrasonic Testing
2 Radiographic Testing
3 Liquid Penetrant Testing
4 Magnetic particle Testing
1 Ultrasonic Testing
2 Radiographic Testing
3 Liquid Penetrant Testing
4 Magnetic particle Testing
Education
HSC - 61% @ March 2003
From Syed Ammal Higher Secondary School, Ramanathapuram, Tamilnadu.
SSLC - 79% @March 2001
From Syed Ammal Higher Secondary School, Ramanathapuram, Tamilnadu.
Experience
1.5 Yrs
SIS Institute of Non Destructive Testing Chennai
Designation NDT Technician (Trainee)
Duration March 2009 to March 2010
Responsibilities
• NDT Multi[UT,RT,PT & MPT] jobs has been carried out.
• Finding open surface defects using PT & MPT Methods.
• Calibration of UT Flaw detectors.
• Doing Parent metal scanning and Weld scanning.
• UT Machines Handled: Sonatest (sitescan140,150), Krautkramer(usm35)
• Thickness Machines Handled: Paramatrics/37DL Plus/Olympas/Modsonic
• RT Cameras Handled: ROLI, TECHOPS/AMERTEST
• Interpretation of radiography films.
• Submitting the Reports as per the indications found.
Reliance Petrochemical Manufacturing Unit, Nagothane, Mumbai
Designation NDT Technician
Duration Shut Down Work 15/04/10 to 05/05/10
Responsibilities
• NDT UT, PT jobs has been carried out.
• Finding open surface defects using PT Methods.
• Defects Familiar in Cracks, Porosity, Pin Hole, Under cut.
• Major Job in PT: DPT has been carried out in weld areas of bottom dish of Reactors.
• Responsible for repairing the defects and PT clearance to be given.
• Submitting the Reports as per the indications found.
• Calibration of UT Thickness Gauge Machines.
• Thickness Machines Handled: Paramatrics/37DL Plus/Olympas/Modsonic
• Thickness of Vessels, Filters, Exchangers etc has been checked.
• Reports has been produced according to various readings found with Isometric Diagram.
AQC School of Welding & NDT Service Trichy
Designation NDT Trainer(Multi Trainer)
Duration 20/06/2010 to Till Date
Responsibilities
• NDT Multi [UT, RT, PT and MPT] jobs have been carried out.
• Finding open surface defects using PT & MPT Methods.
• Calibration of UT Flaw detectors.
• Doing Parent metal scanning and Weld scanning.
• Interpretation of radiography films.
SIS Institute of Non Destructive Testing Chennai
Designation NDT Technician (Trainee)
Duration March 2009 to March 2010
Responsibilities
• NDT Multi[UT,RT,PT & MPT] jobs has been carried out.
• Finding open surface defects using PT & MPT Methods.
• Calibration of UT Flaw detectors.
• Doing Parent metal scanning and Weld scanning.
• UT Machines Handled: Sonatest (sitescan140,150), Krautkramer(usm35)
• Thickness Machines Handled: Paramatrics/37DL Plus/Olympas/Modsonic
• RT Cameras Handled: ROLI, TECHOPS/AMERTEST
• Interpretation of radiography films.
• Submitting the Reports as per the indications found.
Reliance Petrochemical Manufacturing Unit, Nagothane, Mumbai
Designation NDT Technician
Duration Shut Down Work 15/04/10 to 05/05/10
Responsibilities
• NDT UT, PT jobs has been carried out.
• Finding open surface defects using PT Methods.
• Defects Familiar in Cracks, Porosity, Pin Hole, Under cut.
• Major Job in PT: DPT has been carried out in weld areas of bottom dish of Reactors.
• Responsible for repairing the defects and PT clearance to be given.
• Submitting the Reports as per the indications found.
• Calibration of UT Thickness Gauge Machines.
• Thickness Machines Handled: Paramatrics/37DL Plus/Olympas/Modsonic
• Thickness of Vessels, Filters, Exchangers etc has been checked.
• Reports has been produced according to various readings found with Isometric Diagram.
AQC School of Welding & NDT Service Trichy
Designation NDT Trainer(Multi Trainer)
Duration 20/06/2010 to Till Date
Responsibilities
• NDT Multi [UT, RT, PT and MPT] jobs have been carried out.
• Finding open surface defects using PT & MPT Methods.
• Calibration of UT Flaw detectors.
• Doing Parent metal scanning and Weld scanning.
• Interpretation of radiography films.
Comments
To work in challenging and dynamic environment and to keep adding value to the Organization. Also learn and gain expertise in construction of projects of varied technologies.
