CAWI/LEVEL II NDT INSPECTOR

TX Texas

United States

I am willing to Travel.
I need a job as soon as possible.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.

American Welding Society – Certified Associate Welding
Inspector:
AWS Cert #09100494
NDT LEVEL II VT, MT, PT, UT-LONGITUDINAL
Dimensional Inspector
Magnetic Induction Testing Inspector

American Welding Society, New Orleans, Louisiana
40 hrs. Certified Welding Inspection Seminar

The Ocean Corporation, Houston, Texas (Graduated)
ASNT Level II Academic and Level I Practical in:
40 hrs. Visual I, II, III and Leak Testing
55 hrs. Penetrant Testing (Visible and Fluorescent)
70 hrs. Magnetic Particle Testing (Visible and Fluorescent)
115 hrs. Ultrasonic Testing (Angle, Straight Beam and
Shear wave)
85 hrs. Eddy Current Testing
90 hrs. Radiographic Testing
40 hrs. Radiation Safety (NRC)
60 hrs. Welding Techniques
30 hrs. Rigging Techniques
60 hrs. Hazardous Material and Confined Work Place Safety
Practice Emergency Response

NDE Quality Systems Inc, Houston, Texas
06/2011 - Present
QC/QA Inspector
Executed 3rd Party/Customer Witness Inspection for Technip
of assembly and assembled oil & gas equipment; Inspected
welds and welding processes on oil and gas equipment to API
1104 and AWS D1.1 standards; Inspection of structural
welding processes to AWS D1.1 standards. Monitored blast and
coating operations on oil & gas equipment; Verified
serialization marking on oil & gas equipment; Examined heat
treatment of industrial welds on oil and gas equipment;
Created written reports and documentation of customer
witness inspection work; Observed and verified NDE
inspection operations on oil & gas equipment were performed
correctly; Confirmed dimensional tolerances of oil & gas
equipment and structural welding assemblies.

Oderco Oil Equipment LLC, Houston, Texas
04/2011 – 06/2011
QC/QA Manager
Worked on project with CarOil Company in Bogota, Colombia
for Chevron. I Monitored QC activities according to the
requirements of the quality, inspection and test plans;
Conducted receiving inspection of raw material for offshore
drilling equipment per certification documentation;
Inspected offshore drilling equipment, oilfield skids,
welds and welding processes on oil and gas equipment to API
1104 and AWS D1.1 standards; Verified serialization and
traceability marking on offshore drilling and oil & gas
equipment; Reviewed heat treatment of industrial welds on
drilling and oil and gas equipment; Created written reports
and documentation of customer witness inspection work;
Validated dimensional tolerances of drilling and oil & gas
equipment per engineering drawings; Monitored and verified
that the NDE inspection operations on drilling and oil & gas
equipment were performed per quality requirements; Generated
traceability documentation of drilling and Oil & Gas
Equipment; Produced daily and weekly reports on all
production activity; Checking rigging and erecting of
derrick for offshore drilling.

JOSS Oilfield Services, Macae, Brazil
10/2010 - 03/2011
QC/QA Inspector
Performed 3rd Party/Customer Witness Inspection for Shell
Oil Company of assembly and assembled oilfield skids;
offshore Subsea drilling and oil & gas equipment; Inspected
offshore drilling equipment, welds and welding processes on
oil and gas equipment to API 1104 and D1.1 standards;
Verified serialization and traceability marking on offshore
drilling and oil & gas equipment; Witnessed and examined
coating operations on oil & gas equipment; Witnessed and
monitored heat treatment of industrial welds of oil and gas
equipment; Monitored and verified NDE inspection operations
on drilling and oil & gas equipment were performed per
quality requirements; Verified dimensional tolerances of oil
& gas equipment; Composed written reports and documentation
of customer witness inspection work; Reviewed documentation
and reports for accuracy and correctness; Witnessed and
observed shipping operations; Checked QC activities
according to the requirements of the quality, inspection and
test plans.

NDE Quality Systems Inc, Houston, Texas
06/2010 - 10/2010
QC/QA Inspector
Executed 3rd Party/Customer Witness Inspection for Technip
of assembly and assembled oil & gas equipment; Inspected
welds and welding processes on oil and gas equipment to API
1104 and AWS D1.1 standards; Monitored blast and coating
operations on oil & gas equipment; Verified serialization
marking on oil & gas equipment; Examined heat treatment of
industrial welds on oil and gas equipment; Created written
reports and documentation of customer witness inspection
work; Observed and verified NDE inspection operations on oil
& gas equipment were performed correctly; Confirmed
dimensional tolerances of oil & gas equipment.

Oderco Oil Equipment LLC, Abu Dhabi, United Arabs Emirates
02/2010 - 06/2010
QC/QA Inspector/Project Manager
Worked on project in the United Arab Emirates for National
Drilling Company of Abu Dhabi, UAE. I Monitored QC
activities according to the requirements of the quality,
inspection and test plans; Conducted receiving inspection of
raw material for offshore drilling equipment per
certification documentation; Inspected offshore drilling
equipment, welds and welding processes on oil and gas
equipment to API 1104 and AWS D1.1 standards; Verified
serialization and traceability marking on offshore drilling
and oil & gas equipment; Reviewed heat treatment of
industrial welds on drilling and oil and gas equipment;
Created written reports and documentation of customer
witness inspection work; Validated dimensional tolerances of
drilling and oil & gas equipment per engineering drawings;
Monitored and verified that the NDE inspection operations on
drilling and oil & gas equipment were performed per quality
requirements; Generated traceability documentation of
drilling and Oil & Gas Equipment; Produced daily and weekly
reports on all production activity; Checked rigging and
erecting of derrick for offshore drilling.

NDE Quality Systems Inc, Houston, Texas
12/2009 - 02/2010
QC/QA Inspector
Performed 3rd Party/Customer Witness Inspection for Technip
of assembly and assembled oil & gas equipment; Inspected
welds and welding processes on oil and gas equipment to API
1104 and AWS D1.1 standards; Monitored of blast and coating
operations on oil & gas equipment; Verified serialization
marking on oil & gas equipment; Observed heat treatment of
industrial welds on oil and gas equipment; Generated written
reports and documentation of customer witness inspection
work; Examined and verified NDE inspection operations on oil
& gas equipment are performed correctly; Verified
dimensional tolerances of oil & gas equipment.

General Electric/Vetco Gray Inc, Houston, Texas
11/2005 – 5/2009
QC/QA /NDT Inspector
Worked on projects for Shell Oil, BP, Exxon, Transocean and
Chevron Inspecting HMF-G & MR-6E subsea riser assemblies;
Performed traceability and post-in documentation of subsea
riser assemblies; Executed dimensional inspections of HMF-G
risers, MR-6E risers, industrial valve bodies and valve body
internal parts; Created non-conformance reports and
documentation of
industrial valve bodies and parts; Implemented MT in working
with the Magnaflux ARQ-968 stationary magnetic particle
machine inspecting industrial valve bodies; Applied MT in
working with a magnetic particle yoke inspecting industrial
welds and on valves; Conducted brinnell hardness readings
using the King Testers portable and stationary; Conducted
Rockwell hardness on industrial valve bodies; Performed PT
in working with magnaflux skl-wp doing inspections on
industrial valves and welds; Carried out Magnetic induction
testing of cladded surfaces on valves bodies; Executed
receiving inspections of industrial valves and components;
Worked with Ultrasonic & Phased Array equipment inspecting
welds on industrial pipe; Monitored assembly and testing of
valve bodies and valve actuators according to API
598,600,602,603 and ASTM standards.

Team MQS inspection, Wood river, Illinois (Conoco Phillips
Turnaround) 09/2005 – 11/2005
NDT Inspector
Performed ET- worked with ACFM using the amigo, model # 247
inspecting industrial welds; Executed RT in working with the
Innovex System, model # CX-2000A conducting PMI Inspections
on industrial pipe; Completed PT in working with SP1 visible
and fluorescent wet penetrant inspecting industrial welds;
Carried out MT in working with contour probe, using 14AM
prepared bath fluorescent inspecting industrial welds;
Performed UT in working with a panametrics 36dl plus
conducting
Thickness reading Inspections on industrial pipe; Conducted
brinnell hardness reading Inspections on industrial pipe;
Worked with isometric drawings walking down pipe and
components for inspections.

I have a passport and am willing to travel.