PAUT/TOFD/UT/RT/MT/PT/VT/IRRSP Level 2

OK Oklahoma

United States

I am willing to Travel.
I need a job as soon as possible.
I prefer permanent jobs.

• Magnetic Particle Testing
• Liquid Penetrate Testing
• Ultrasonic Testing
• Visual Weld Inspection
• Radiographic Inspection
• ASNT IRRSP Certification in X-Ray (exp Dec of 2013)
• Mark J Davis 80 Hour Phased Array Class
• 36 Hour TOFD Class

National Polytechnic College of Science
2008 - Graduate

Oct 2011 – July 2011
MT / PT / UT / PAUT / TOFD
TD Williamson:
In this job capacity I have completed full Pipeline Integrity Inspections, ranging from SCC sizing and removal, Exterior & Interior Material loss, and Sleeve assessment. Performed and recorded KAPA and Rstreng information, and recorded results. Completed and recorded PH, Pipe to soil, and AC potential for all inspection sites. These inspections have been completed on ERW and DSAW in service Pipelines. I have completed Integrity Inspections on Pipelines for Kinder Morgan, Enbridge, OneOK, Enterprise and Exxon Mobile. Types of Pipelines that I have inspected range from Natural Gas, Oil, and Propane. I was a Senior Tech for Sleeve assessments and training for full integrity inspections. I have also received extensive training in Phased Array, and TOFD testing methods for OD and ID flaw sizing. As a lead I was responsible for Time tracking for techs that were present during inspection as well as final reports. I was also part of a team with my Level III for TDW’s different testing methods being presented to our customers.

May 2011 – Oct 2011
MT / UT / FastUltrasonic Level II
PFiNDE:
In this job capacity I have completed full Pipeline Integrity Inspections, ranging from SCC sizing and removal, Exterior & Interior Material loss, and Sleeve assessment. Performed and recorded KAPA information and Full FastUltrasonic Inspection of all Long seam Welds. Completed and recorded PH, Pipe to soil, and AC potential for all inspection sites. These inspections have been completed on ERW and DSAW in service Pipelines. I have completed Integrity Inspections on Pipelines for Kinder Morgan, Enbridge, OneOK and Exxon Mobile. Types of Pipelines that I have inspected range from Natural Gas, Oil, and Propane. I was a Lead for Sleeve assessments and a Lead in training for full integrity inspections. I have also received extensive training in FastUltrasonics testing methods for OD and ID flaw sizing. As a lead I was responsible for Time tracking for techs that were present during inspection as well as final reports and being a liaison between my company and the Customer. I have a great ability to work well with customers and created a through, efficient, yet quick process to make sure that the customer was greatly satisfied in all aspects of our inspections.

Aug 2010 – Feb 2011:
RT, UT Level II / Radiation Safety Officer / UT, RT & Radiation Safety Instructor
United Spiral Pipe:
I have taken the initiative to read and interpret work instructions and procedures related to all NDT methods that are utilized at USP to insure adherence to Customer and API Specifications. I played a key role into locating vendors for obtaining necessary equipment for the NDT Department. Not only did I locate local venders for NDT equipment, but I also introduced equipment that would help to streamline NDT processes. I was responsible for securing the ability to implement In-house training of NDT personnel with the approval of USP’s contracted Level III. I am a delegated Instructor for UT Level I & UT Level II as well as RT Level I & Level II classes. As the Radiation Safety Officer I am responsible for adherence, implementation, and continual improvement of the Radiation Protection Program that assures USP’s Radiation Department meets and exceeds California State requirements. I am the Instructor in charge of the Radiographer Assistant 8 hour Safety course and pride myself with an 87% pass rate. I took a lead role in re-development of Training Requirement Forms to meet ASNT’s SNT-TC-1A guidelines for Qualification and Certification of NDT personnel.

May 2009 –July 2010:
Radiation Safety Officer/PT, VT, RT, UT Instructor
PSLNA:
Performed Manual UT Shearwave on Spiral Welded pipe following ASTM E213 standard, and API 5L. Performed RT following API 5L and API 1104. As RSO I completely re-wrote the Emergency and Operating Safety procedure for RT to meet and exceed State requirements. I also performed safety audits, equipment inventory, TLD badge collections and maintaining of all daily, quarterly, and Bi-yearly records as per State requirements. RSO duties included being a liaison for the company and the Mississippi Dept. of Radiological Health. As the RSO I was responsible for all 15 Radiographic Personnel. Those responsibilities included but were not limited to, staffing, scheduling, continual training I was a member of a team of Internal Auditors who’s over view included NDT Personnel in UT, RT, VT and PT methods to assure that all aspects of Work Instructions and Procedures were being adhered to. Made revisions to Work Instructions and Procedures that helped to not only streamline all quality testing, but improved overall communication between the Quality and Production Departments. Kept record of and maintained all NDT personnel files including but not limited to OJT, classroom hours for method training, Internal Certification Records, Vision testing, Audit Reports and Radiation Safety Training. Maintained Calibration database of all Measuring and Monitoring devises. Prepared PQR’s for Double Jointer section. I was a team member who led in establishment Work Instruction’s for Double Joint adhering to API 1104 specifications. I assisted in collecting and proof reading all data to assure that the product was in compliance with customer specifications. Prepared and Instructed PT (Level I & II), RT (Level I & II), UT (Level I & II), Radiation Safety, and Visual Level II classes per course outline of SNT-TC-1A. I maintained a pass/fail percentage above 90%. Lead a team of Engineers and Maintenance Personnel in the designing, planning and implementation of Radiographic Testing facility so PSL could become more self sufficient relying less on outside contractors. Redesigned NDT equipment. While redesigning NDT equipment, I also made contacts that not only to help reverse engineer specialty NDT products, but to cut cost of these items by a significant amount. I implemented a Min/Max system on all NDT expendable parts.




June 2008 – May 2009:
Radiographer Assistant:
Evraz Oregon Steel Mills (Spiral Pipe Division)
Trained in 40 hour Radiation Safety. Ultrasonic Inspection (Compressional & Shearwave). Assisted Level 2 Radiographer with Spiral Pipe End shots. Trained in film interpretation, Radiation Safety, and RTR, following API 1104 and API 5L. Over 1900 hours of training. UT Level 2 with over 1700 hours.


Nov 2007 – June 2008:
NDT Inspector Level 2
Decisive Testing:
Performing PT, VT, UT, and MT inspections on numerous parts ranging from Aircraft, Mechanical, & Building materials. Followed many different standards from Mil Standards and Customer Specs. Hours accumulated exceed requirement for NAS 410 for level 2 in PT, MT, VT