Babak Ebtesam CV

Sweden

I am willing to Travel.
I need a job as soon as possible.
I am willing to work overseas.

1. Visual Testing (VT) , ASNT level 2 , from Iranian Welding Research & Engineering
Center on received in July,7, 2007
2. Magnetic Testing (MT) , ASNT level 2 , from TWI Persia on received in Nov.02,2010
3. Penetration Testing (PT) , ASNT level 2 , from TWI Persia on received in Oct.31,2010
4. Ultrasonic Testing (UT) , ASNT level 2 , from TWI Persia on received in Dec.17,2010
5. Master of engineering management (MEM) weld engineering , from TWI Persia in Dec.21,2008 till Apr.22,2009

B.S in Metallurgy Engineering from Karaj Azad University in Karaj in Aug. 2006

From 2006 to 2007 : worked at B.S.N ( Behsotun Sanat Novin ) as inspector for car gas tanks (LPG), I tested for proper thickness and pressure test and visual test.

From 2007 to 2009 : Worked at the Joosh Fanavar Company (inspection welding company) as structure welding inspector , I tested all of weld joints with the following methods: Visual (VT) , Magnetic (MT) , Penetration (PT) , Ultrasonic (UT) Tests. After testing the defected looking joints , I filled up report papers and hand it to the subcontractor to redo the defected joints and copy of the report was kept in their file for future reference. And prior to the welding work we would check all the welding equipments to make sure that they are working properly and also tested the welders for their qualification and if they would not pass the test they could not work until they were able to pass the test . These jobs were for city municipal of Tehran.

From 2009 to 2012: While working for the above company I performed the supervision of the welding inspectors for the wind turbine , I was supervising QC department during these process I checked all the equipments calibration for proper performance and evaluated QC personnel , if they were not pass the qualification test we had to replace them , and I would give the QC department the next day schedule for them to know which part or segments to perform testing on and I had a random testing of welded joints to make sure that the QC department is doing their job properly. This job was also performed in Tehran.

To participle in a growth oriented, professional engineering team that offers opportunities to utilize my abilities and develop my potential in Metallurgy Engineering ,targeted towards increasing company profits