Phased Array LVII and shearwave LVII

MN Minnesota

United States

I am willing to Travel.
I need a job as soon as possible.
I am willing to work overseas.
I prefer temp jobs.

PAUT LVII, SWUT LvII, VT LvII, MT LvI, PT LvI

Below certification was done at the Electric Power Research Institute (EPRI)
• EPRI PDI-UT-3 Through Wall Sizing in Pipe Welds Ferritic and Austenitic with IGSCC,
length sizing and detection. January 2012
• EPRI PDI-UT-1 Ferritic Pipe Welds, length sizing and detection. January 2012
• EPRI PDI-UT-2 Austenitic Pipe Welds with IGSCC, length sizing and detection. August 2010

Below Training was taken at Ridgewater Community College,MN
• 96+ hr PAUT level II Training June 2012, Course: NDT2073 PDI Phased Array Ultrasonics,

Below training meets or exceeds ASNT-SNT-TC-1A, ANSI/ANST CP-189.
• 40 hr VT level I/II 1,2&3 IWE/IWL Endorsement Training August 2011
• 80 hr UT level II Training December 2009.

Below training meets or exceeds ASNT-SNT-TC-1A, ANSI/ANST CP-189, NAS 410
• 20 hr MT level II Training June 2008.
• 12 hr MT level I Training June 2008.
• 24 hr PT level II Training June 2008.
• 8 hr PT level I Training June 2008.
• 40 hr UT level II Training August 2007.
• 40 hr UT level I Training August 2007.

• Ridgewater Community College, Hutchinson ,MN Phased Array(PAUT)
• Sonic Systems International. UT, VT(1,2,3 IWE,IWL)
• System One Technical Training Center/Hudson Technical Training Center. UT, MT, PT.
• Major Professional Studies, Winona State University, Senior standing.
• Post Secondary Options Student: Winona State University, ‘97-‘98.
• Graduated BOLD High School, Olivia, MN, with honors 1998.

PDI-UT Lv II (Shear and Straight Beam), VT Lv II, MT LvI, PT LvI.
Dec. ‘09-Current Contract
Sonic Systems International,
• Walk down components.
• Perform linearity’s on UT scopes.
• Calibrate for exams.
• Weld Profiling/T&C's.
• Performed shear wave exams.
• Prepared reports.
• In addition performed all tasks listed under Lead UT FAC Level II(Limited) Technician.

UT Level II (Shear and Straight Beam)
Aug. ‘12-Mid Oct. ‘12 Contract
Anatec-LMT
• Walk down components.
• Perform linearity’s on UT scopes.
• Calibrate for exams.
• Weld Profiling/T&C's.
• Performed shear wave exams.
• Prepared reports.


Lead UT FAC Level II (Limited) Technician
Mar. ‘09-Nov. ‘09 Contract
Sonic Systems International,
• Prepared FAC Final Outage Reports.
• Prepared and reviewed work packages.
• Planned and delegated work.
• Briefed multiple work crews.
• Reviewed exam reports.
• Walked down components.
• Data analysis.

UT FAC Level II (Limited) Technician
Feb. ‘09 Contract
ITLS,
• Preformed FAC Straight Beam Exams.
• Utilized piping iso's.
• Data Collection.
• Griding.
• Calibrations.
• Prepared reports.

UT FAC Level II (Limited) Technician
Oct. ‘08- Feb. ‘09 Contract
Sonic Systems International,
• Preformed Straight Beam Exams.
• Utilized piping iso's.
• Data Collection.
• Griding.
• Calibrations.
• Prepared reports.

UT FAC Level II (Limited) Technician
Mar.‘08-Mid May ‘08 Contract
Hudson Global/System One,
• Preformed Straight Beam Exams.
• Utilized piping iso's.
• Data Collection.
• Griding.
• Calibrations.
• Prepared reports.

UT Level I Technician
Oct ‘07-Dec ‘07 Contract
Hudson Global,
• Assisted with weld overlay PDI shear wave exams/ T&C.
• Calibrations.
• Organization.

Highly Motivated and dependable.

PAUT AND UT Equipment Used
• USN 50R, 60SW Shear wave.
• EPOCH 4 Shear wave.
• EPOCH XT Shear wave.
• USM GO D-meter.
• Panametrics 36,37,38DL Plus D-meter.
• ES Beam Tool Phased Array set-up tool.
• GEIT Phasor-XS Phased Array.
• Omni Scan MX Phased Array.
• Omni Scan MX2 Phased Array.
• EPOCH 1000i Phased Array.

SKILLS
• Microsoft Office Suite.
• SDRC Ideas CAD Program.
• Strong work ethic.
• Dependable.
• Exceptional safety and quality awareness.
• Exceptional attention to detail.
• High mechanical aptitude.
• Adaptable to changing schedules.
• Team work.
• Willingness to travel / Valid U.S. Passport.
• Ability to follow directions and procedures.