CV

India

I am willing to Travel.
Currently working but always looking.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.

Certificate : level II in Radiography as per ISO 9712
Institute : Bhabha Atomic Research Center(under AERB ),
Mumbai ,India.
Passed year : 1995
Certificate : Ultrasonic Testing level II
Society : Indian Society for non-destructive testing,
Delhi chapter, India.
Passing Year : 1995
Certificate’s : Level II in RT,UT,MT & DP
Society : American Society for non-destructive
testing–SNT-TC-1A.

M.Phil In Pollution Control .
Corrosion Monitoring, Boiler/Cooling Water Treatment++,
Chemical Cleaning (ONLine+..)
Passing year : 2009 The Global Open University,
Nagaland.
Diploma : Advanced Diploma in Web & E-commerce
Technology
Institute : Software Technological Group
International, New Delhi , India.
Passing Year : 2001.

Post Graduate Diploma : Post Graduate Diploma in Ecology
& Environment
Institute : Indian Institute of Ecology &
Environment, New Delhi ,India.
Project work & Master Thesis- Energy Conservation through
Fire Side Treatment in Sugar Industry with M/s Aditya
chemicals Delhi.{Dealer of ICI (U.K) & Nalco Chemicals (USA)
joint venture Fortune 500 company in the field of Water
Treatment chemicals}.
Passing year : 1997

Diploma : Diploma in Total Quality Management &
ISO 9000
Institute : National Institute of Labour Education &
Management , Chennai (T.N.), India

Passing year :1996.

Graduation : Bachelor of Science from D.A.V. (P.G.)
College, Dehradun,India.
University : Garhwal University, Sri Nagar,
Uttarakhand ..India
Passing year : 1991.

Not complete----
***Also enrolled for “Diploma in energy management
Technology” in year1994
PROFESSIONAL QUALIFICATION
Certificate : level II in Radiography as per ISO 9712
Institute : Bhabha Atomic Research Center(under AERB
), Mumbai ,India.
Passed year : 1995
Certificate : Ultrasonic Testing level II
Society : Indian Society for non-destructive
testing, Delhi chapter, India.
Passing Year : 1995
Certificate’s : Level II in RT,UT,MT & DP
Society : American Society for non-destructive
testing–SNT-TC-1A.

Total Experience :
More than 19+ years in consultancy and services to
construction & engineering
Industries.
Professional Experience:

Date: (from/to) October 2011 to Till Date
Company/Location: TUV India Private Limited
Description: Empanel for Inspection /consultancy
Bhabha Atomic Research Centre ,Power (L&T/MPpower/Indure),
Oil & Gas, Piping, Coating inspection and TUBE for heat
exchanger and boilers, pressure vessels , flanges etc
(Long list )
Date: (from/to) August 2011 to September 2011 & from 2001
to July 2010
Company/Location: Indian NDT Centre /Gaziabad,Ultra
Tech /Narora,
Description: Consultant
Project Co ordination/Training of staff for R L A and QA
/NDT
M/s NASL(A jvs of ALSTOM POWER and NTPC),. M/s Utility
Power Tech Ltd(A jvs of Reliance Infra and NTPC, Hydro power
Over hauling) . So many casting and forging companies ,Man
power recruitment for M/S Ultra Tech,Approval of IBR and
QAPs, Procedures etc. In service inspection of Bullets at
IOCL Loni and Alipur Inspection and testing of complete
Power Plants In-process inspection, Supervision of Non –
Destructive testing (RT,UT,UT
Thickness,MPT,DPT,Oxide,testing,Fiberscope,Replica,Hardness,
hydrozan embritelment testing) ,Visual and sample selection
for Destructive testing (Mechanical) testing, Welding as per
IBR etc
Date: (from/to) August 2010 to July 2011
Company/Location: Moody International
Description: Sr inspection Engineer/Co-coordinator
Quality Assurance: I attached with GAIL Training
Institute, NOIDA for over all management(co-ordination,
procurement & construction ,planning up to commissioning and
O&M activities in guarantee period) of 3xHRSGx2(BOILER)
,Compressors and Gen sets package (Fire also)/UNICEF before
this I was in inspection activities like
WPS/PQR,RT,UT(M),UT(Auto),UT,strenging,fitup for Free/Tie –
In joints,laying,HDD,joint coating/surface preparation
,Elbow,
Coating,pigging,Pnumatic,Purging,lowering,back
filling,Restoration,Marking,Repairing,Thickness,MPT,DPT,Comp
leate Coating inspection (Peel, thickness and visual )at
site etc Up to vacuum inspection
PROJECTS (VDPL(48"500km) BNPL (24"500km, SMTPI Including
HOT Tapping ,MDPL and steel line of various
sizes),hydro testing of 48’’ to 3’’(Narmada offshore )&
Haryana City Gas Inspection at Jindal India for 12" pipe
In-process inspection, Raw Material Inspection, Raw material
TC review, Final Inspection of product, Supervision of Non –
Destructive Testing (RT, UT, MPT,DPT) and Destructive
(Mechanical) testing, Non-Conformities, Corrective and
remedial actions
Complete Coating Inspection. (detail in MEENAAR Global
steps)and field joint coating, Pipe Laying Steel 60 Km size
25 Km 12"and 35Km 4",MDPL 50 Km size 3"to 6” ,Hot Tapping
for Commercial Connection, Domestic meter connection
Inspection )etc
As per API, ASTM, ASME, ISO, IBR,TEMA etc.

Date: (from/to) 2001 to July 2010
Company/Location: Indian NDT Centre /Gaziabad,Ultra
Techs /Narora,Meenaar Global/Delhi
Description: Consultant
With M/s Ultra Tech Engg
In Service Inspection of Complete Nuclear power Plants from
2001
Project Coordinator (Inspection as per NPCIL laying
procedure ) for : -
• NPCIL Narora, Kakarpar,Surat, Kota&
KaiGaon,Karnataka
Inspection of all pipe including SS, All the pressure
vessels (Like Nitrogen Tanks etc), All SG(Steam Generator)
, Moderator Room Piping, orifice / venture, All other
Equipments, Corrosion Monitoring of elbows, Fire Fighting
Lines, Valves, Flanges and storages tanks(Underground also),
Post and Preheat weld treatment, providing training for new
staffs etc
Day to Day Co – ordination with testing team, with NPCIL
inspection officers(Project and Job Locators/wetness staff)
,Safety department of AERB/BARC, Issuing of Safety devices,
Monitoring and hot spot
precautions, co-ordination for safety training . Preparing
document for hot permits and safety training, preparing
Status report and Interactions with NPCIL for planning for
selection of joints and final report authentication .
Supervision of various Destructive and Non – Destructive
examination like Radiography, UT,UT Thickness /Corrosion
Monitoring , MPT, DPT, Hydro test , Pneumatic Test, Tensile
Bend, Impact Test, Hardness test on
the equipments and tanks/pipelines .
With Meenaar (Global )Engineer and consultant
Description: Consultant
Inspection and testing of piping. Review of WPS and
procedure qualifications, Welders Qualifications as per
API/ASME. UT operator qualification. Raw material
inspection and their TC review, Witness of Physical Testing,
piping spool fabrication and hydro testing of piping.
Interpretation of Radiograph films, Stress Reliving,
Supervision of non – destructive testing like MPT, UT, PT.
Piping (underground/above ground),
Project s
Siti Gas ,Muradabad(A ZEE Group Network) –Total
Consultancy for pipe manufacturing in-process inspections at
Suriya Roshni Ltd for various types of Piping which
includes testing wetness (100%/Random),Review of
Records/Reports Chem. Analysis(heat Analysis),Control
tensile Testing(heat),Grain size,UT of Coil, skelp body &
skelp edges ,MPI of edges, Product Analysis(Spectro),Tensile
testing(body only longitudinal orientation),Flatting
Testing, Fracture Toughness testing (Impact),Seam
Normlizing,Metallograpic examination (at>10X + etc
),Hydraulic testing, UT of AUT weld, body & HAZ, Final
Inspection (Visual & Dimensions ), out of roundness at pipe
ends(Ovality),Thickness, straightness, Length,
Weight(Km/MTR),Workmanship & Defects (height of internal
flash, Dents, Trimming inside, flash, offset, of plate
edges, cracks, sweats, leaks, lamination at the pipe ends,
Ark Burns, Hard Spots, imperfection at surface, End
beveling, Marking, Coating and end protection etc)
Jindal Saw Pipe Ltd
Coating Inspection of various type of Pipes.. which includes
testing witness (100%/Random),Review of Records/Reports,
Visual inspection, Pipe Identification(By soft data ,packing
list & Release note) Pre heat Temp,Ph Value after Water
Wash, Relative Humidity, Dew Point, Ambient Temp & Elapsed
Time, Cleanliness, Degree of Dust, Surface Roughness, Temp
of Pipe Before Chromatic Acid treatment, Concentration of
phosphoric & Chromate solution, Temp of pipe ends & Middle,
Temp of Adhesive film Temp of PE film,
Holiday,Testing,Elongationatfailure,Calibration(digital
Thermometer, Roughness gauge, Coating Thickness gauge,
Holiday detector, Hygrometer)Bond Strength testing at cut
back end and middle of pipe, Impact testing, Adhesion
Testing, LAB(Degree of Cure and ∆ Tg , C. D. Test (48
hrs),Air Entrapment, Indentation Hardness, Raw material
Test(EPOXY POWDER-Gel Time Test, Cure Time Thermal
Characteristics(Tg1,Tg2&∆H)&Moisture Content
,ADHESIVE-
Specific Gravity, Melt Flow rate & Vicat Softening Point,
POLYETHYLENE-Specific Gravity, Melt Flow rate & Vicat
Softening Point ,Water Absorption & Oxidation induction
time)
Haryana city Gas ,Gurgaon) –Total Consultancy for pipe
manufacturing in-process inspections , pipe laying
/commissioning and CNG station piping inspection at Jindal
India Ltd and at Site of Gurgaon more then 100 Km
Jindal India Ltd Kolkatta
All the In process inspection of pipe manufacturing at
Jindal piping and Coating Plants All the above mention
testing repeated (as Surya Roshni and Jindal Saw) and laying
at all over Gurgaon City and Manesher .
Date: (from/to) Company/Location
Description: From Dec1992 to Feb1998 for IRC Engg &
from July 1996 to 2011 Maxim Engineering &
Inspection(proprietor)
IRC Engg Services Pvt Ltd /Maxim Engg & Inspection, New
Delhi
Manager (For IRC)/Partner Later proprietor for Maxim
(A well known NDT,RLA and DT company)I manager in all India
level and co-ordinate with third party’s ;Client. Like NTPC,
BHEL, ABB, ALSTOM, DALEIM, ICAM,UPL ,IOCL,BPCL etc and also
associate with developing of
database and website of company
Visual & Geometrical Inspection ,Radiography ( X-Ray & Gamma
Ray),Ultrasonic Flaw detection, Thickness Measurement,
Corrosion mapping of Boiler Tubes & Scanning Bottom Plate
of Storage Tanks, Magnetic Particle Testing, Liquid
Penetrant Test, Borosonic Testing of Rotor Shaft bore,
Video Fiberscope Inspection, In-situ Oxide Scale
measurement, Eddy Current test of turbine blades, condenser
tubes & Heat, Creep Rupture Test, Tensile test (high
temperature & Room temperature) ,Bend Test / Flattening test
/ Impact Test, Fracture toughness. Temper embrittelment.
Source identification of stress corrosion, hydrogen
embrittlement, Crevices & Pitting Corrosion. Hardness Test,
Stress Relieving, NPCIL - In Service Inspection,
IOCL – Inspection at IOCL Mathura
Refinery
(A) Erection of Tanks, PRU, SRU, CRU & Hydro Cracker
(B) Major overhauling
(C) Power Plant / BHEL
(D) Bottling Plants- Mugal Sarai, Jhunjunu and Jaipur.
Quality Head for-HRSG Project at NTPC-Kayamkulam
in1998-
2000) for ALSTOM POWER Ltd(other projects are NTPC KAHAL
GAON & Unchahar Erection for ALSTOM & Emergency Shutdown
,NTPC-RIHAND-Over Hauling TurbineALSTOM/-TWICE,Shakti Nagar,
UP Board-Kanpur for ALSTOM –Turbine,NTPC Vindhyanchal for
ALSTOM-Turbine,NTPC –Korba –For UCC-Boiler -02 no.,TATA
Electric Co.Trambay-Boiler inspection -Twice, Rajghat-Delhi-
Boiler R L A for Premier Mott MacDonald at NTPC TANDA-
Boiler,MESB, PARAS-Boiler and Turbine, IGPL-Delhi-Boiler
.AST& Haryana Pipe,Mukut Pipe,IFFCO, NFL
Erection-:Co-generation AT SINARMAS Paper ,BHIGWAN,Baramati
BHEL/ALSTOM-Boiler-ALSTOM FRANCE/ALSTOM INDIA for Turbine,
HRSG at HPCL Vizak/ALSTOM,HRSG and GAS turbine at ONGC
Uran/ALSTOM,Nuclear Power-Kota–Turbine/ALSTOM, IOCL panipat-
Turbine/ALSTOM,Maruti Gurgaon-Turbine/ALSTOM and a long list
of other companies.

Date: (from/to) March 1999 to July 2003
Company/Location: In the field of IT In Delhi
/LONDON.U.K.
Description: Instructor /Developer/Windos 4.0 Networking
Date: (from/to) September 1993 to April 1995
Company/Location: Aditya Chemicals /Delhi
(Authorized Dealer of 'Alfloc Water treatment Chemicals’ A
Joint venture of M/S ICI (U.K.) and NALCO Chemical Company
USA .)
Description: Sale/Service Engineer –
Corrosion, Scaling and Energy conservation Quality Program
services.(Hardness, TDS, Ph, Alkalinity (P&M),S,,
phosphate,, Conductivity and so many other testing )
of specialty chemicals for Raw water, feed water and process
application for Cooling/Boiler water treatment also did de-
scaling of process equipment and on-line cleaning program to
Industries client like Dabur, Uni-Lever Group, American
embassy, Hotel Hyatt, Modigroup etc
CODES, STANDARDS AND SPECIFICATIONS
Experienced with the following codes, standards and
specifications:
Codes familiar with : ASME ,TEMA, API, IS, DIN, BS,CSA
Clients Type :
So many multinational (like Alstom Power, Premiere Mott
MacDonald etc) ,Casting, Forging ,Saw Pipe Factory ,Refinery
, Oil & Natural Gas Company ,Power Plant’s (Nuclear ,
Combine Cycle and Thermal) Fertilizer plants etc
Projects:
(i) Nuclear power plant: Erection &In-service-Inspection
(ii) Power Plant’s (Combine Cycle and thermal, nu clear)
0.5 MW to 500MW –Erection & over hauling .
(iii) Refinery / Oil & Natural Gas / Petroleum- Erection
and Shut Down’s ( Vessels ,Tank’s,
Piping etc )
(iv) Fertilizer –Erection and Annual Maintenance
(v) Cement Factory etc.
Extra Curricular Activities
Computer Quiz Qualifier in College organized by Samaj Seva
Sadan, Allahabad, U.P. 1st in Teen-Tangi (Three leg race )
Race in School Twice. Have attended many seminars in PHDCCI
on Energy-conservation under the United Nation Development
Projects. Have attended many seminars in National level and
International level

At present I am providing consultancy to M/S TUV-NORD for
Bhabha Atomic research Centre ,OIL & GAS Sector, Fertilizer
and Power etc before this to M/S Indian NDT Centre for their
R L A /Q A job from NTPC jvs Utility PowerTech.org & NASL
/Ultra TECH for NPC/Meenaar Global for OIL & GAS etc I
quit from M/s MOODY INTERNATIONAL as Sr. Engineer Inspection
and attached with GAIL Training Institute, NOIDA for over
all management(co-ordination, procurement & construction
,planning up to commissioning and O&M activities in
guarantee period) of 3xHRSG(BOILER)x2, Compressors and Gen
sets package (Fire also) before this I was in
PROJECTS(VDPL(48”500km)BNPL( 24”500km,SMTPI),hydro testing
of 48’’ to 3’’(Narmada offshore )& City Gas ),UNICEF (Work
inspection)etc . As I have exp in the
field of energy conservation through Feed water treatment
(M/S ICI AND NALCO CHEMICALS DEALER )chemically, and also
have experience .in component inspection on initial state
to final erection ,and in-service of power plant(Thermal,
Nuclear and Hydro) R L A & Quality control. Including
welding, casting, forging etc.
I am B.Sc, M.Phil in Pollution Control and going for
research. which help me to take almost complete control of
any type of job in any type of projects specially in power
and Oil & Gas sectors , So I think any power and Oil & Gas
serving company is suitable for me . I have more then
19+ years exp. in the field of Inspection & Consultancy of
plants , projects/research and unique knowledge of multi-
discipline Interface Technology for power Plant & Oil and
Gas etc sectors emerge out me as a all rounder winner from
all the candidate from all over the world I have
already provided services to so many well known
companies(NTPC,NPC,HPC,BHEL, ALSTOM POWER,MOTT MacDonald(UPL
& NASL), IOCL,TATA,UPL,IFFCO,ONGC,HPCL, BPCL AND SO MANY…
etc) which also strengths my suitability for any expert and
consultancy jobs .
Thanks & Regards,
Lalit Mohan Kothari
+91-9899898039
“Dreams and dedication makes powerful combination”