Sr Welding Inspector/Welding Inspector
NDT.org Member Since: 2012
Added: 12/4/2012
Last Updated: 12/4/2012
Last Updated: 12/4/2012
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
Country:
Malaysia
Status:
I am willing to Travel.
I am on a job and will finish soon.
I am willing to work overseas.
I prefer permanent jobs.
I am on a job and will finish soon.
I am willing to work overseas.
I prefer permanent jobs.
Certifications
1) 3.2 CSWIP Senior Welding Inspector
CSWIP Cert No : 15973 (valid 19 July 2015)
2) BGAS Painting Inspector
Cert No:38177 ( Valid 1st February 2014)
3) Ultrasonic Testing Level 2(PCN 3.1 & 3.9)
Cert No:F008S3329804 (PCN No: 304246) Valid AugusT 2013
4) 3.4 PCN Radiography Interpreter Level 2
Cert No : F008S3620947 (PCN No: 304246) Valid April 2013
5) 3.1 CSWIP Welding Inspector
CSWIP Cert No : 6400/2
CSWIP Cert No : 15973 (valid 19 July 2015)
2) BGAS Painting Inspector
Cert No:38177 ( Valid 1st February 2014)
3) Ultrasonic Testing Level 2(PCN 3.1 & 3.9)
Cert No:F008S3329804 (PCN No: 304246) Valid AugusT 2013
4) 3.4 PCN Radiography Interpreter Level 2
Cert No : F008S3620947 (PCN No: 304246) Valid April 2013
5) 3.1 CSWIP Welding Inspector
CSWIP Cert No : 6400/2
Education
2012- CURRENTLY ASIA e-UNIVERSITY
EXECUTIVE MASTER IN BUSINESS PROJECT
1995 - 1998 UNIVERSITI TEKNOLOGI MALAYSIA
Diploma in Mechanical Engineering
(Majoring in Marine Technology).
EXECUTIVE MASTER IN BUSINESS PROJECT
1995 - 1998 UNIVERSITI TEKNOLOGI MALAYSIA
Diploma in Mechanical Engineering
(Majoring in Marine Technology).
Experience
SUMMARY OF EXPERIENCE
Having more then 12 years experience in Oil and Gas field especially in QAQC department with involvement in welding supervision, coordination and inspection, NDT and blasting painting inspection with experience in Structurals, Pipings, Mechanical and Pipelines Onshore and Offshore in Oil & Gas Construction, fabrication/installation of Jackets, Modules, Living Quarters, Storage Tanks, Loading Facilities, Deep Water pipelines, Refurbishment and Reactivation of Vessels, Converstion FPSO and other related activities. Has worked to various International codes and standards eg. AWS D1.1, ASME B31.3, API 1104 ,DNV OS F101 and many others.
Has resumed roles with Main-contractors, Project Management Consultant and as Client Representative in various local and international projects where throughout the period has performed the following activities:-
Inspection and monitoring of steel structure, piping fabrication and pipeline activities done by Contractor such as material inspection, receipt, TKY joints marking and traceability during construction.
Inspection and monitoring of fabrication activities in relation to fit ups, alignment and distortion of Primary, Secondary and Tertiary structures and review of dimensional survey report.
Inspection and monitoring of carbon steel (API 5L Gr B, ASTM A105, A106), low temperature (ASTM A333), Cu-Ni (UNS 70600), Stainless Steel (ASTM A312 TP316L), Duplex Stainless Steel (ASTMA790 UNS32750) and Super Duplex Stainless Steel (ASTM A790 S32760) pipe spool fabrication and installation in relation to fit ups, dimensions, alignments, and distortion.
Inspection and monitoring of welding activities in relation to project, verification of welding process (Automatic weld, SMAW ,GMAW, TIG, etc) consumable control, welders qualification, correct application of weld procedures, pre heat and PWHT (prior, during and after welding).
Surveillance to ensure correct application of NDT on both Structural and Piping. Review of NDT reports and interpreted radiographs.
Witnessed and monitoring Automatic Ultrasonic Testing (AUT) activities and reports
Confirmation of finished weld profiles and releases of sub assemblies for subsequent release to painting or installation.
Witness of Hydrostatic tests – flushing, testing, drying, reinstatement, pigging, chemical cleaning as required.
Inspection and monitoring of Blasting and Painting activities – monitoring of weather condition (RH, dew point, steel temperature), surface profile/cleanliness, paint mixing/application, WFT/DFT check and visual inspection.
Monitoring FJC (Field Joint Coating) for surface preparation, steel substrate temperature and steel preheat temperature, surface profile cleanliness and roughness as client specification, monitoring relative humidity, monitoring overall thickness dry film thickness after FBE, water quenching, monitoring salt test as client specification, monitoring and inspected holiday testing after coating completed by holiday detector and visual examination, monitor coating repair followed the project procedure and client specification
Surveillance and inspection of Architectural and Insulation works for structural and Piping. Included fabrication and requirement for Living Quarters.
Day to day interface with Contractors inspection, Supervisory and Engineering and QAQC Department..
Ensure that all inspection activities are carried out in line with agreed Inspection and Test Plans (ITP’s) and all works are in compliance with standards and procedures
Having more then 12 years experience in Oil and Gas field especially in QAQC department with involvement in welding supervision, coordination and inspection, NDT and blasting painting inspection with experience in Structurals, Pipings, Mechanical and Pipelines Onshore and Offshore in Oil & Gas Construction, fabrication/installation of Jackets, Modules, Living Quarters, Storage Tanks, Loading Facilities, Deep Water pipelines, Refurbishment and Reactivation of Vessels, Converstion FPSO and other related activities. Has worked to various International codes and standards eg. AWS D1.1, ASME B31.3, API 1104 ,DNV OS F101 and many others.
Has resumed roles with Main-contractors, Project Management Consultant and as Client Representative in various local and international projects where throughout the period has performed the following activities:-
Inspection and monitoring of steel structure, piping fabrication and pipeline activities done by Contractor such as material inspection, receipt, TKY joints marking and traceability during construction.
Inspection and monitoring of fabrication activities in relation to fit ups, alignment and distortion of Primary, Secondary and Tertiary structures and review of dimensional survey report.
Inspection and monitoring of carbon steel (API 5L Gr B, ASTM A105, A106), low temperature (ASTM A333), Cu-Ni (UNS 70600), Stainless Steel (ASTM A312 TP316L), Duplex Stainless Steel (ASTMA790 UNS32750) and Super Duplex Stainless Steel (ASTM A790 S32760) pipe spool fabrication and installation in relation to fit ups, dimensions, alignments, and distortion.
Inspection and monitoring of welding activities in relation to project, verification of welding process (Automatic weld, SMAW ,GMAW, TIG, etc) consumable control, welders qualification, correct application of weld procedures, pre heat and PWHT (prior, during and after welding).
Surveillance to ensure correct application of NDT on both Structural and Piping. Review of NDT reports and interpreted radiographs.
Witnessed and monitoring Automatic Ultrasonic Testing (AUT) activities and reports
Confirmation of finished weld profiles and releases of sub assemblies for subsequent release to painting or installation.
Witness of Hydrostatic tests – flushing, testing, drying, reinstatement, pigging, chemical cleaning as required.
Inspection and monitoring of Blasting and Painting activities – monitoring of weather condition (RH, dew point, steel temperature), surface profile/cleanliness, paint mixing/application, WFT/DFT check and visual inspection.
Monitoring FJC (Field Joint Coating) for surface preparation, steel substrate temperature and steel preheat temperature, surface profile cleanliness and roughness as client specification, monitoring relative humidity, monitoring overall thickness dry film thickness after FBE, water quenching, monitoring salt test as client specification, monitoring and inspected holiday testing after coating completed by holiday detector and visual examination, monitor coating repair followed the project procedure and client specification
Surveillance and inspection of Architectural and Insulation works for structural and Piping. Included fabrication and requirement for Living Quarters.
Day to day interface with Contractors inspection, Supervisory and Engineering and QAQC Department..
Ensure that all inspection activities are carried out in line with agreed Inspection and Test Plans (ITP’s) and all works are in compliance with standards and procedures
Comments
PROFESSIONAL COURSE ATTENDED
July 2010 BGAS Blasting & Painting Operative
Conducted by TWI Sdn.Bhd
May 2010 CSWIP Senior Welding Inspector 3.2
Conducted by TWI Sdn.Bhd
January 2009 BGAS Painting Inspector Course
Grade 2&3
Conducted by TWI Sdn.Bhd
August 2008 Ultrasonic Testing (PCN Level 2)
Conducted by MINDT Sdn.Bhd
April 2008 Radiography Interpreted Level 2
Conducted by MINDT Sdn Bhd
August 2004 Radiography Interpreted 3.4
Conducted by TWI Johor Bahru.
June 2002 i) H2S Awareness and Permit to Work
(PTW)
Conducted by Sarawak Shell Bhd.
September 2001 Welding Inspector 3.1 (CWSIP)
Conducted by Ruane-TATI, Terengganu
August 2000 Implementation and Maintaining ISO
9000 Quality Management System.
Conducted by Neville-Clerk.
Liquid Penetration Testing &
Magnetic Particle Inspection.
Conducted by MJ NDT Training and Consultancy Services.
March 1999 AutoCAD application level 1
(Advanced Design Visualization)
Conducted by Auto-Desk Training
Centre.
SAFETY TRAINING
March 2010 Intelligent Defensive Driving Course
Conducted by Drive Wise
May 2010 Worksite Hazard Management for
Frontline Supervisors Trainning
Conducted by Shell Malaysia EP, Asia Pacific
July 2009 i) Sea Survival & Offshore Safety Procedures
ii) Helicopter Underwater Escape Training with EBS
iii) Basic Fire Fighting & Self Rescue
Basic Safety and Emergency Preparedness (OLF approved)
Basic Offshore Safety Induction and Emergency Trainning (OPITO approved
Conducted by MSTS Asia (valid : 09 July 2013)
May 2006 i) Sea Survival & Offshore Safety
Procedures
ii) Helicopter Underwater Escape
Training with EBS
iii) Basic Fire Fighting & Self
Rescue
Basic Offshore Safety Induction and
Emergency Trainning (OPITO approved)
Conducted by MSTS Asia
December 2005 i) Sea Survival & Offshore Safety
Procedures
ii) Helicopter Underwater Escape
Training and
iii) Basic Fire Fighting & Self
Rescue
Conducted by CONSIST Training
Centre, Kuala Lumpur.
June 2002 i) Sea Survival & Offshore Safety
Procedures
ii) Helicopter Underwater Escape
Training and
iii) Basic Fire Fighting & Self
Rescue
Conducted by Seribima Maritime Training Centre (SMTC)
July 2010 BGAS Blasting & Painting Operative
Conducted by TWI Sdn.Bhd
May 2010 CSWIP Senior Welding Inspector 3.2
Conducted by TWI Sdn.Bhd
January 2009 BGAS Painting Inspector Course
Grade 2&3
Conducted by TWI Sdn.Bhd
August 2008 Ultrasonic Testing (PCN Level 2)
Conducted by MINDT Sdn.Bhd
April 2008 Radiography Interpreted Level 2
Conducted by MINDT Sdn Bhd
August 2004 Radiography Interpreted 3.4
Conducted by TWI Johor Bahru.
June 2002 i) H2S Awareness and Permit to Work
(PTW)
Conducted by Sarawak Shell Bhd.
September 2001 Welding Inspector 3.1 (CWSIP)
Conducted by Ruane-TATI, Terengganu
August 2000 Implementation and Maintaining ISO
9000 Quality Management System.
Conducted by Neville-Clerk.
Liquid Penetration Testing &
Magnetic Particle Inspection.
Conducted by MJ NDT Training and Consultancy Services.
March 1999 AutoCAD application level 1
(Advanced Design Visualization)
Conducted by Auto-Desk Training
Centre.
SAFETY TRAINING
March 2010 Intelligent Defensive Driving Course
Conducted by Drive Wise
May 2010 Worksite Hazard Management for
Frontline Supervisors Trainning
Conducted by Shell Malaysia EP, Asia Pacific
July 2009 i) Sea Survival & Offshore Safety Procedures
ii) Helicopter Underwater Escape Training with EBS
iii) Basic Fire Fighting & Self Rescue
Basic Safety and Emergency Preparedness (OLF approved)
Basic Offshore Safety Induction and Emergency Trainning (OPITO approved
Conducted by MSTS Asia (valid : 09 July 2013)
May 2006 i) Sea Survival & Offshore Safety
Procedures
ii) Helicopter Underwater Escape
Training with EBS
iii) Basic Fire Fighting & Self
Rescue
Basic Offshore Safety Induction and
Emergency Trainning (OPITO approved)
Conducted by MSTS Asia
December 2005 i) Sea Survival & Offshore Safety
Procedures
ii) Helicopter Underwater Escape
Training and
iii) Basic Fire Fighting & Self
Rescue
Conducted by CONSIST Training
Centre, Kuala Lumpur.
June 2002 i) Sea Survival & Offshore Safety
Procedures
ii) Helicopter Underwater Escape
Training and
iii) Basic Fire Fighting & Self
Rescue
Conducted by Seribima Maritime Training Centre (SMTC)
