ASNT NDT LEVEL III IN RT UT MT & PT
(File No: 165260)

CERTIFIED WELDING INSPECTOR
CSWIP 3.1, Certificate No: 25004

TOFD, B SCAN, C SCAN & POST DATA PROCESSING with OMNI SCAN
Equipment

Ultrasonic Phased Array In-house training

Ultrasonic Phased Array

ASNT MEMBER SINCE 2006

Ultrasonic Testing of TKY Joints

Interpretation of Radiographs

ASNT Level II Penetrant Testing

ASNT Level II Magnetic Particle Testing

BARC Certified Radiographer Course

ASNT Level II Ultrasonic Testing

ASNT Level II Radiographic Testing

MECHANICAL ENGINEERING

15 YEARS

15 years of Experience in NDT and Welding (QC) as a Welding
Inspector; Radiographic film interpreter for cross country
pipe lines; Client Inspector; Third party surveyor; NDT
Specialist Engineer; NDT Training Manager; Technical
Manager; NDT Level 3 Engineer for offshore NDT Systems
etc.,

Application and exercise of NDT inspection methods (RT UT
MT PT), NDT/QC Engineer in EPC (Engineering, Procurement and
Construction) Contracts, Cross country Pipelines,
Petrochemicals, Refineries, Power Plants, Process plants,
Nuclear Power plants, Offshore Pipeline barge & Fabrication
shops etc.,

Conversant with International Standards, API 1104 & RP 2X,
AWS D1.1, ISO, ASME/ANSI, ASTM, DIN, SHELL DEP, ADCO SPECS,
BS & Australian standards.

Experience in Conducting NDT Auditing and Procedure
Demonstration for ASME ‘U’ – Stamp as an Appointed NDT
Level III


September 2011
To Till Date
ALKHAJA PIMEX LLC.
(PIH), ABU DHABI


ASNT NDT LEVEL III/RT FILM INTERPRETER/QC ENGINEER
Radiographic Film Interpreter (ASNT Level III)
Contractor: NPCC (National Petroleum Corporation Company)
CCIC (Consolidated Contractors
International Company)
Client: ADCO (Abu Dhabi Company for Onshore Oil
Operations)
Project: Qusahwira Full Field Development - QFD
Job Responsibilities
Interviewed and Qualified by ADCO (Abu Dhabi Company for
Onshore Oil Operations)
Worked as a Level III Radiographic film Interpreter for
• Pipe line as per API 1104 + SHELL DEP 61.40.20.30-
Gen + ADCO Spec.30-99-00-0041
• Piping joints as per ASME B 31.3 + SHELL DEP
61.40.20.30-Gen + ADCO 30.99.00.0032
• Welder Qualification Testing (WQT) as per ASME SEC.
IX, Procedure Qualification Record (PQR)




July 2009
–
July 2011






ENERGY WORKFORCE
SDN BHD.
MALAYSIA


Technical Manager/Training Manager/NDT Trainer cum Examiner
Technical Manager/ Training Manager
Job Responsibilities
• Conducting Training and Certification in NDT as per
ISO and SNT-TC-1A document of ASNT for Energy Workforce (EW)
and Various Client personnel of East and West Malaysia
including,
OCEANCARE CORPORATION SDN BHD, Sarawak/Bintulu/Labuan;
COOPER CAMERON (M) SDN BHD, Selangor;
BUREAU VERITAS (M) SDN BHD, Sarawak.
KENCANA PETROLEUM, Sitiawan
• Reviewing and Approving Company Auto UT, Phased
Array, B Scan, ABI Scan Reports.
• Witnessing all kinds of NDT jobs especially AUT,
TOFD, Phase Array Sector Scan & Ultrasonic A Scan as a
Client on behalf of Energy workforce Sdn Bhd.
• Providing Technical direction to Advance NDT
Inspectors as a trainer and examiner.
• Solving Technical issues at site with clients in
relation to Advance and conventional NDT such as ACFM (
Alternating Current Field Measurements), CUPS (Corrosion
Under Pipe Support), LRUT (Long Range Ultrasonic Testing),
A, B, C, ABI, TOFD, PAUT, MT, PT, RT (Iridium 192 & X ray)
inspections.
• Good Experience in reviewing and interpreting the
Post Processing reports of PAUT & TOFD.
• Conducting NDT Technical Presentation at client’s
facilities
• Job responsibility as a Consultant for all
Conventional and Advance NDT inspection contracts.
• Preparation and establishment of procedures for
Mechanical Inspection as well as NDT methods as a senior
inspector and NDT Level-III.
• Worked as Team leader for a team of engineers,
inspectors and technicians for special tasks, work scoping,
and shutdown inspection activities etc, at ONSHORE AND
OFFSHORE.
• Amending Company NDT procedures; Reviewing and
Endorsing Client’s NDT procedures
• Providing Technical direction and guidance to NDT
Inspectors on various inspection activities.
• Conducting NDT procedure demonstration for ASME – U
stamp as an appointed Level III
Special achievements in the company
• Trained and certified about 300 personnel in NDT
disciplines (MT,PT,UT,UTTG & RI) as per ASNT-SNT-TC-1A






January 2007
–
November 2009






PRIME 4 INSPECTION, DUBAI, UAE


Senior QAQC/NDT Level 3 Engineer
Senior QAQC/NDE Engineer
Job Responsibilities
• DUTCO McCONNEL DOWELL, ENOC. DUBAI, UAE.
Project : Naphtha Hydrotreater Reformer Project.
Location : Jabel Ali free zone, Dubai, UAE.
Client : ENOC (Emirates National Oil Corporation)

• ABSG CONSULTING INC., (TPI), DUBAI, UAE.
Project : Al-Khafji Field Development Phase-1
Location : Kuwait & Saudi Arabia Offshore (pipe line
barge)
Client : KJO (Khafji Joint Operation) Owned by
Kuwait Oil Company & Aramco Gulf Operations

• CONSOLIDATED CONTRACTORS COMPANY (CCIC), ABUDHABI,
Project : Ruwais 3rd NGL Train (Natural gas liquids),
Location : Ruwais, Abu Dhabi.
Client : Snamprogetti / GASCO.

DUTIES/RESPONSIBILITIES FOR ABOVE CLIENTS
• Mechanical Inspection in and around U.A.E. mainly
includes, Inspection of Plates, Pipes and forgings. Review
of Welding Procedures, witnessing Procedure Qualification &
Welder Qualification, Review of NDE Procedures.
• Witnessing Auto UT on (offshore) Pipe line Barge
joints and Reviewing/Endorsing AUT reports on behalf of ABSG
consultancy as a third party inspection engineer
• Coating and Painting; Inspection and Review of
reports.
• Stage-wise inspection as per Inspection & Test Plan
• Carrying out preliminary inspection of material of
construction and reviewing the material mill certificate
(MTC)
• Dimensional Inspection, Final Inspection & testing
• Punching of Boiler test packs for hydro and
pneumatic test.
• Welding inspection of Boiler small bores and big
bores.
• Flange Parallelism inspection & Welding In-process
inspection.
• Selection of appropriate NDT methods and witnessing;
• Monitoring to remove defects as per Excavation
Procedure;
• Visual and fit-up inspection of groove and fillet
welds.
• Interpretation of Radiographs as per ASME B 31.3 &
31.1

March 2006
–
January 2007


CONSOLIDATED CONTRACTORS COMPANY (CCC), OMAN
.
QAQC Engineer
QC Engineer
Job Responsibilities (Shut down job)
• Punching of Mina Al Fahal Cogeneration Power plant
test packs (ORC-Oman Refinery Petroleum Company)
• Releasing test packs after rectifying ‘A’ items for
hydro and pneumatic test.
• Inspecting Permanent Item Installation during Re-
instatement after hydro/pneumatic test.
• Submitting test packs for final certification and
approval.
• Witnessing hydro test and pneumatic test
• Selection of appropriate NDT methods and witnessing.
• Checking of Relief valves and pressure safety valves
for proper installation.
• Visual inspection of groove and fillet welds.
• Interpretation of Radiographs as per ASME/ANSI B
31.1.


June 2004
–
March 2006



SHAW NASS MIDDLE EAST W.L.L, BEHRAIN

Senior QAQC Engineer

Senior QAQC Engineer
Job Responsibilities
• Monitoring and inspecting different type of welding
operations such as SMAW, GMAW, GTAW, SAW & FCAW.
• Interpretation of Radiographs as per ASME B 31.3.
• Defect Analysis in welding and NDT fields (Cause,
Elimination and Rectification).
• Chemical analysis of welds and Base metals to right
usage of consumables and materials.
• Reviewing of Inspection and test records prior to
submission.
• Witnessing and reviewing of NDT methods such as RT,
UT, MT, PT & LT also PWHT Set up.
• Monitoring Heat treatment process and conducting
Hardness testing.
• Making welding surveillance record and submitting to
the client.
• Studying Isometric Drawings and instructing to make
as requirements.
• Controlling quality of the fabricated spools right
from the raw material inspection to finished products.



January 2003
–
June 2004




ABDULLA NASS & PARTNERS CO. LTD, JUBAIL, K.S.A

QAQC Engineer

QAQC Engineer
Job Responsibilities
• Ensuring that welding meet with Client
Specification, Project scope and Drawings.
• Preparing Inspection Documents for finished jobs and
maintains test records.
• Visual Inspection of fit-ups, Root and final welding
of Groove welds and fillet welds.
• Interpretation of Radiographs as per ASME/ANSI B
31.3
• Preparing Welding Procedure Specification (WPS),
Witnessing Procedure Qualification records (PQR) and Welder
Qualification.
• Preparing NDE Procedures and Technique sheets also
selecting appropriate NDT method.
• Conducting/Organizing NDE Training for technicians
for their certification as an Instructor according to ASNT-
SNT-TC-1A.
• Carrying out preliminary inspection of material of
construction and reviewing the material mill certificate.

October 2001
–
January 2003

ECC DIVISION, L & T TARAPUR, INDIA

QAQC Engineer

QAQC Engineer
Job Responsibilities for the project of Tarapur Atomic Power
station (NPCIL- Nuclear Power corporation of India Ltd)
• Inspection and checking of all Variable parameters
i.e., Voltage, Amperage and Travel Speed.
• Monitoring to remove defects as per Excavation
Procedure.
• Inspection and Checking of Purging gas requirements
and its flow rates.
• Visual Inspection of Primary Piping welds for
Nuclear Power Plant.
• Witnessing RT, UT, MT, PT also maintaining
Inspection reports.
• To conduct all required tests in accordance with
contract documents and to prepare fill in and sign all
reports and forms as necessary for the compliance with
contract quality standards.






June 1999
–
October 2001



L &T, HEAVY ENGINEERING WORKS, POWAI, INDIA

QAQC Engineer

QAQC Engineer
Job Responsibilities
• Planning / organizing and checking of work progress
and schedules to meet the deadline / target dates and
implements QA/QC plans.
• Welding Inspection such as visual, welder auditing,
PQR witnessing & welder qualification.
• Inspection and Checking of materials for corrosion
and mechanical damages.
• Hardness and corrosion surveying and performing
ferrite content test.
• Witnessing all mechanical testing and Post Weld Heat
Treatment (PWHT).
• Witnessing of Hydro testing and NDT.
• Depth estimation of Defects by Ultrasonic Flaw
detector and marking for rectification.
• Inspection of TKY joints, Butt joints, Tube sheets,
Forging, Rolled plates Stainless steel to Carbon steel
Cladded joints, Thickness reduction evaluation, Set on & Set
Though Nozzles by Ultrasonic flaw detector.



November 1997
–
June 1999


PUNJ LLOYD LTD., DELHI, INDIA

QAQC Engineer


QAQC Engineer
Job Responsibilities for MMPL, MBPL & GAIL Gandhar Pipe line
Projects, India.
• Interpretation and evaluation of Radiographs as per
API 1104 and maintain records, reporting to QC Manager.
• Visual Inspection of Main line joints, Tie-in
joints, Station joints, header joints and Golden joints.
• Preparing Pipe Book for stage wise activities and
witnessing Welder Qualification and PQR.
• Verification of Material Identity and material trace
ability.
• Selection of appropriate NDT and giving direction to
UT & RT Crew.
• Making reports of welding, NDT & weld Visual.

CURRENTLY IN UAE LOOKING FOR ROTATION JOBS.
JOINING TIME 1 MONTH.