Medit Inc

salesteam@meditinc.com

96 Sherbrook St.

Winnipeg

Manitoba

Canada

18776132210

http://www.fiberscope.net/telescopic-pole-inspection-camera-cobra.html

salesteam@meditinc.com

The telescoping Cobra inspection camera is light weight and
built to access hard to reach areas above or below ground such
as wells, eaves troughs, attics, suspended ceilings or gutters
etc. The telescoping pole that adjusts from 1.6 to 4m had
built in IR LED lights to ensure proper lighting in any
situation.
The images captured by the camera are displayed on a TFT LCD
color monitorThe Cobra has a battery life of 3.5 hours in
bright areas and 3 hours in dark areas, and taking 2.25 hours
to fully recharge. . The unit has a weight of less than 2.7kg
and a 1.8m linking cable from the pole to the video display
making this a highly portable and easy to use unit in any
inspection situation.

Camera
• Colour camera housing, Ψ 60mm (2.4in), L 95mm
(3.7in)
• Resolution 420 TV Lines
• 1/3” Sony Super HAD CCD, PAL
• Sensitivity 0.0 lux – LED’s on
• 850nm IR infra red LED’s for low light viewing up
to 10 metres(32.8ft)
• IP 67
• Lens 3.6mm, giving a 68° field of view
• Built in electronic iris which automatically
compensates for daylight
• Operating temperature -10 to +55°C

Housing and Operation
• The camera is housed in a durable acetal body
• The camera housing is hinged at the base to allow
multi positioning of the head
• The camera mount is made from acetal which is
permanently fixed to end of the telescopic pole
• Tools supplied to permanently lock the camera in
the operators desired position

Extendable Pole
• The total length of the pole closed is 1.63 metres
(5.3ft)
• The total length of the pole including camera is
just over 4 metres (13.1ft)
• The extendable pole is constructed from glass
fibre, in 3 sections
• The locking clamps are of polymer construction
• Dual left handed or right handed lever
• Strong locking force
• All of the cables from the base of the pole to the
camera are housed internally within the pole
• The bottom of the pole is an acetal base with
connector housing which has a built in 3 way connector

Link Cable
• Connects from the bottom connector housing to the
monitor assembly
• 1.85 metres in length (6.1ft)

Monitor
• 5” LCD TFT colour monitor, housed in carry case
with built in sunshield and neck strap
• Resolution 960 (H) x 234 (W)
• Using the remote control or buttons on the front
of the monitor, the picture can be inverted to allow above
or below viewing.

Batteries & Charger
• A main battery with up to 3 hours continual use
from full charge in complete darkness, and up to 3 ½ hours
continual use in daylight (fitted to rear of carry case)
• The batteries do not self discharge after storage
and will retain 85% of their charge voltage
• The batteries are SANYO, eneloop 2000mAh, NIMH low
self discharge, fast charge 2 amps for 1 hour, over 1,000
cycles, 10 cells
• A second same spec battery is also supplied
• A battery charger is also supplied, 240V only (for
USA only we would like to use RS494-2015 – EN60601, UL
listed UL-2601-1)