NDT Level II Inspector
Posted: 3/8/2018 11:12:25 AM
NDT.org Job Number:
* Please reference NDT.org Job Number on all correspondence
Performs nondestructive inspection using phased array and other nondestructive inspection to assure parts, materials and assemblies conform to engineering specifications and quality requirements. Primary job functions will be performing phased array inspection on composite laminate and laminate parts. This will consist of but, not limited to contact, Manual Immersion and Automated Immersion pulse echo and TTU Phased Array inspection techniques. Inspecting for porosity, voids, foreign materials, delaminations and other typical process discrepancies.
Shift: Will start on 1st shift with the possibility of becoming a 2nd shift position (230-11pm).
Works from engineering specifications and written instructions to plan and perform inspection techniques such as Phased Array, TTU/Pulse Echo Ultrasonic inspection and visual inspection of composite laminates.
Evaluates parts and materials to assure conformance to all quality and engineering requirements.
Must be able to successfully pass level 2 Qualification testing to NAS-410 and ATC Manufacturing, Inc NDI personnel specifications for phased array inspection and Ultrasonic Testing Certification. Upon hire or within one month of hire date.
Routes rejected parts and assemblies to appropriate department for disposition.
Ability to communicate effectively to the other members of our NDI Team, and other relevant department Leads, on any noteworthy issues.
Carries out responsibilities defined by ATC Manufacturing Inc Personnel Specifications and Procedures for nondestructive inspection.
Works with minimal supervision while demonstrating problem solving skills.
Participates in meetings as members of cross- functional teams/task groups Coordinates duties, tasks, findings, and other priorities to our Team of NDI technicians to maintain inspection quality and throughput efficiencies.
Provides job related training or instruction as required. Performs other related duties as required.
Requires documented proof of formal training to meet Level 2 requirements to NAS-410 and ATC Manufacturing, Inc NDI personnel specification for phased array inspection and Ultrasonic Testing (80 hrs).
Requires documented proof of experience/on-job-training to meet the Level 2 requirements to NAS-410 and ATC Manufacturing, Inc NDI personnel specification for Ultrasonic Testing (minimum 800 hrs).
Preferred minimum of two years of experience in phased array inspection using Manual and Automated motion control equipment using immersion Phased array inspection techniques.