Certifications and Training

· Level II Visual Weld Inspection-ASNT, NAS-410, NAVSEA- T9074-AS-GIB-010/271 (8/12/2005)
· Computer Technical Training – PC101 Building, Upgrading, and Troubleshooting (2001)
· Computer Technical Training – PC 102 Advanced Topics and A+ Certification (2001)
· ISO 9000 Overview (1993)
· Ultrasonic Thickness Gauge Level II Reliance Testing Company (1989)
· Problem Solving and Decision Making (Kepner/Tregor) 1988
· Statistical Process Control – General Electric Company (1986)
· Liquid Penetrant Instructor @Grumman Aircraft-Bethpage, NY (1985)
· Liquid Penetrant Inspection Level III Examiner Certification (1985)
· NASA/Rockwell/Rocketdyne Penetrant Certification (1985)
· Radiographic Inspection Level III Examiner Certification (1985)
· Effective Supervisory Practices (1985)
· Mechanical Engineering-137 The Art and Science of Welding (1982)
· Industrial Radiography Interpretation Certification – Magnaflux Corporation (1980)
· Industrial Radiography Technician Level II Certification – Magnaflux Corporation (1979)
· Industrial Isotope Radiography Certification – Gamma Industries (1979)
· Airco Technical Institute Certification – Welding Technology- 6G (1976)

Essex Community College
· Systems and Technical Audit June 1988
· Quality First Task Force Implementation Training March 1988

University of Wisconsin
· Mechanical Engineering 137 – The Art and Science of Welding September 1982

Perry Hall High School
Graduated-College Preparatory June 1971

Experience

Resident Quality Assurance Representative May 2007- Current 2007
Procurement Services Consulting, Inc.
/ Shaw Stone & Webster

•Performing on site third party surveillance & inspection of all structural steel, welding / coating inspections @ Cianbro Fabricating & Coatings, Curtis Bay, MD.
•To include but not limited to, 100% Visual Weld and Dimensional Inspections in accordance with Shaw Stone & Webster, AWS DI.I and other customer required specifications for the fabrication of PPL (Pennsylvania Power & Light) Brunner Island FGD Retrofit Project.




Sr. Quality Control Inspector October 2006-December 2006
ALCORE, INC.
1502 Quarry Drive
Edgewood, MD 21040

•Performed visual and dimensional inspections on, metallic and non-metallic Honeycomb details, in accordance with ALCORE and / or customer specifications.
•To include, AS9100, FIRST ARTICLE, BOEING, ISO-9000-2000, MRAS, & other specifications and requirements too numerous to mention here. Completing all required documentation to include but not limited to, C of C’s, Inspection Reports as deemed necessary by ALCORE and / or, the customer.



Chief Body / Paint Inspector 1-A May 1995 –Retired-July 2005
General Motors Corporation, Baltimore MD
·Inspect vehicles and identify all mutilations, defects and discontinuities within metal fabrication and paint operations.
·Provide final approval and ship authority for all required re-work operations.
·Supply written feedback to all department supervisors for immediate corrective action.
·Coordinate and implement problem-solving data throughout all departments (trim, body shop, paint and paint repair).

Resident Quality Assurance Representative August 1994 – February 1995
R.W. Hunt & Company, Pittsburgh, PA

·Visual inspection of stainless steel plate products for the City of New York, Tunnel Project #3.
·Witness all mechanical testing, tensile, Rockwell’s, etc.
·Verification of all code required documents, heat numbers, chemical compositions, etc

Sales Representative June 1993 – May 1994
American Scale & Equipment Company, Inc., Baltimore, MD

·Concentrated on developing new business for scales and analytical balances, weights and measures.
·Retained business by executing outstanding customer service in the Maryland, South Central Pennsylvania, Washington, D.C., and Northern Virginia area.
·Participated in a business plan that focused on saturating the market and increasing revenue.

Director Marketing/Sales January 1989 – December 1992
Artech Corporation / Reliance Testing Company, Timonium, MD
·Responsibilities included extensive business-to-business contact through inbound requests and cold calls.
·Prepared cost/time proposals for mechanical, chemical, nondestructive, and forensic analysis.
·Supervised and trained employees on the interpretation and evaluation of test specimens in accordance with any /and all required specifications and codes.

Quality Engineer/NDT Level III Examiner – MRB Approved November 1982 – January 1989
Martin Marietta Aero & Naval Systems, Baltimore, MD

·Identified problem items through audits and investigations and implemented corrective procedures.
·Developed quality procedures in accordance with applicable MIL-STD’s/MIL-Spec’s (9858/45208, etc.)
·Tested all welded assemblies or composite materials for Aero & Naval Defense products.
·Established techniques and interpreted code, standards, and specifications.
·Conducted personnel training, examination, and certification of all NDT employees’.

Quality Control Inspector February 1980 – November 1982
Buffalo Tank Division / Bethlehem Steel Corporation, Baltimore, MD

·Supervised all nondestructive testing personnel of visual and dimensional inspection of man rated pressure vessels, life support systems, metal fabrication development and related products.
·Assisted with engineering design, drawings, production planning, written procedures, and drawing breakdown.
·Identified raw materials and inspected precision machined parts by using precision tools and calibration.

Maryland Shipbuilding & Drydock, Baltimore, MD December 1978 – February 1980
· Ship Repair – responsibilities were very similar to those listed for Buffalo Tank.

Dixie Manufacturing, Baltimore, MD December 1976 – December 1978
Pressure Vessels – responsibilities were very similar to those listed for Buffalo Tank.

November 2007

Gregory Plapas
304 Chandler Court
Joppa, MD 21085

(443) 922-9052
AJ68Z28@aol.com



Dear Sir / Madame,

With a diversified background and considerable experience in materials testing and welding inspection, I am confident I can make a meaningful contribution to the operation of your firm.

My twenty-eight (28) years of experience includes Mechanical, Visual, Destructive, Nondestructive, and Chemical and Failure Analysis of commercial, industrial, and military articles. I am fluent in the use of most mechanical inspection tools to include but not limited to: Dial Indicators and Calipers, Micrometers, Depth Micrometers, Height Gages etc… I am knowledgeable and have applied the use of AS9100, FIRST ARTICLE INSPECTIONS ISO-9000-2000, ASME, AWS, and numerous other specifications and codes, too numerous to mention here.

I enjoy working with people independently or as part of a team with the ability to get things accomplished. Throughout my career, my superiors have recognized my personal commitment, creative talents, and the ability to meet my assigned objectives. I have the ability to supervise and have a proven record of outstanding performance with a list of accomplishments. I work comfortably under stress and can hit deadlines, utilizing time management skills. My training and experience highly qualifies me for the interpersonal and communication skills needed in today’s business world.

Enclosed you will find my resume. A list of recommendations can be provided upon request. Realizing that a written biography cannot adequately communicate the benefits I can provide, I would appreciate the opportunity for a personal interview and look forward to hearing from you soon.

Respectfully,

Gregory P. Plapas