Certified Level II NDT Technician (MT, PT, UT, ET, RT, VT)
NDT.org Member Since: 2008
Added: 3/5/2008
Last Updated: 3/5/2008
Last Updated: 3/5/2008
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
CA California
Country:
United States
Status:
I am willing to Travel.
I am on a job and will finish soon.
I am willing to work overseas.
I prefer permanent jobs.
I am on a job and will finish soon.
I am willing to work overseas.
I prefer permanent jobs.
Certifications
Summary of Qualifications
•Certified Level II in RT, UT, ET, MT, and PT methods good until January 2011.
•Responsible and performed independent NDI equipment set-up and calibrations.
•Interpreted results of inspections in accordance with codes and written specifications or procedures.
•Performed on-the-job training and guidance of new NDI personnel and trainees.
•Airframes metal shop and composite materials repair final acceptance inspector and lead supervisor.
Certifications/Qualifications
•NDI Technician Recertification Course, NAS North Island,
January 6, 2008-January 18, 2008.
•Lean Six Sigma White Belt Course, NETC-LSSWB-1.0, 3 hours,
January 24, 2008
•Specific Tasking: CH-46 UT Shaft Qualification Course CIN N-701-0006
NAS North Island, May 16, 2006.
•Specific Tasking: NORTEC 2000D+ Eddy Current Flaw Detector Course CIN N-701-0006, NAS North Island, July 16, 2007.
•Final Process Inspector – Airframes Metal and Composite Material Repair Shop – October 2005-Present
•Certified Level II in RT, UT, ET, MT, and PT methods good until January 2011.
•Responsible and performed independent NDI equipment set-up and calibrations.
•Interpreted results of inspections in accordance with codes and written specifications or procedures.
•Performed on-the-job training and guidance of new NDI personnel and trainees.
•Airframes metal shop and composite materials repair final acceptance inspector and lead supervisor.
Certifications/Qualifications
•NDI Technician Recertification Course, NAS North Island,
January 6, 2008-January 18, 2008.
•Lean Six Sigma White Belt Course, NETC-LSSWB-1.0, 3 hours,
January 24, 2008
•Specific Tasking: CH-46 UT Shaft Qualification Course CIN N-701-0006
NAS North Island, May 16, 2006.
•Specific Tasking: NORTEC 2000D+ Eddy Current Flaw Detector Course CIN N-701-0006, NAS North Island, July 16, 2007.
•Final Process Inspector – Airframes Metal and Composite Material Repair Shop – October 2005-Present
Education
Education
•High School Diploma, Delaware Valley Regional H.S. – June 2003.
•Aircraft Nondestructive Inspection Technician , Class C1 NDI, 590 hours, October 2005-Februrary 2006
•Advanced Composite Material Repair, Class C-603-3868A, 160 hours, April 8, 2004
•Aviation Structural Mechanic (Hydraulics & Structures) Common Core Course C-603-0175, Class A1, March 8, 2004
•Embry Riddle Aeronautical University – Presently matriculated in Aviation Maintenance Management Degree, Completion of 13 Credits thus far.
•High School Diploma, Delaware Valley Regional H.S. – June 2003.
•Aircraft Nondestructive Inspection Technician , Class C1 NDI, 590 hours, October 2005-Februrary 2006
•Advanced Composite Material Repair, Class C-603-3868A, 160 hours, April 8, 2004
•Aviation Structural Mechanic (Hydraulics & Structures) Common Core Course C-603-0175, Class A1, March 8, 2004
•Embry Riddle Aeronautical University – Presently matriculated in Aviation Maintenance Management Degree, Completion of 13 Credits thus far.
Experience
(6033-NDI/USMC) Nondestructive Inspection Technician, February 2006-Present
•Performed field and in-shop scheduled and unscheduled NDI requirements
•Complied with various aircraft nondestructive inspection bulletins on CH-46, CH-53E, AV8/B, EA-6B, UH-60, UH-1, Cobra, and F/A-18 aircraft and components.
•Set-up and calibrate NORTEC 2000D+(ET), PD-214(ET), MIZ-20(ET), MIZ-21(ET), MIZ-40(ET), USN-52(UT) flaw detectors.
•Process control and systems checks on H-710G (MT) Bench, DA 200 Parker Probe(MT), ZA-43 (PT) kit and ZA-28(PT) line, Magnaflux 150(RT), and Lorad LPX 160(RT) X-ray machines.
•Performed field and in-shop scheduled and unscheduled NDI requirements
•Complied with various aircraft nondestructive inspection bulletins on CH-46, CH-53E, AV8/B, EA-6B, UH-60, UH-1, Cobra, and F/A-18 aircraft and components.
•Set-up and calibrate NORTEC 2000D+(ET), PD-214(ET), MIZ-20(ET), MIZ-21(ET), MIZ-40(ET), USN-52(UT) flaw detectors.
•Process control and systems checks on H-710G (MT) Bench, DA 200 Parker Probe(MT), ZA-43 (PT) kit and ZA-28(PT) line, Magnaflux 150(RT), and Lorad LPX 160(RT) X-ray machines.
Comments
Currently, I am enlisted in the United States Marine Corps and will be at the end of my enlistment in the summer of 2008. I am willing to travel a bit, in the United States and out of the country. I am interested in NDT jobs, located in Southern California, that are with companies offering competitive compensation, growth, and career advancement opportunities.
