STATIC EQUIPMENT MECHANICAL INSPECTOR / WELDING INSPECTOR
Posted: 8/21/2008 10:16:46 AM
Call NDT.org at (888) 278-8804 (+1 415 469 0489 International) to see contact information and additional private resumes.
I am willing to Travel.
I am on a job and will finish soon.
I need a job as soon as possible.
I am willing to work overseas.
I prefer permanent jobs.
1)CWI, American Welding Society,Certification No.08021591.
2)ASNT Level II in RT,PT & MT.
3)Saudi Aramco Personnel Approval no. 70006700.
1) Diploma in Mechanical Engg. from State Council of Technical Education and Vocational Training, Orissa, India.
2) A.M.I.E. in Mechanical Engg. from The Institution of Engineers (India), Membership No.T022455-7
•Stage wise inspection of Pressure Vessel as per ITP.
•Inspection of Pressure Vessel components i.e. Plates, Pipes & Piping components, Fasteners, Flanges, Pipe fittings, Strainers, Demister pads, Column internals & Packing materials and Special parts designed as per international codes and standards i.e. ASME Sec II, VIII div. I and TEMA.
•Inspection of all kind raw materials at manufacturer’s shop or suppliers place.
•Equipment receiving, storage and preservation, pre-installation, elevation/alignment, internal installation and tray leak testing, flange joint-gasket verification and bolt tightening and vessel closure inspection as per ITP, Inspection checklist, Material System Specification, Engineering Standard and Process Industry Practices.
•Expedite erection, alignment, grouting, testing and pre-commissioning activities of mechanical equipments.
•Updating equipment daily installation/alignment status and preparing daily progress report for weekly and monthly progress meeting.
•Attanding weekly log book entry and NCR meeting with client and field engineering.
•Pipe joint fit-up and dimensional checking as per latest isometric drawing and relevant WPS.
•Piping spools erection and checking for alignment, slope and orientation.
•Walkthrough and QC Punch listing prior to hydrotest.
•Witness Flushing and Cleaning of Piping system.
•Gasket verification, Bolt torque tightness witnessing, High point & Low point checking.
•Verification of Calibration certificates for Pressure Gauges, Manifold and Relief Valve etc.
•Preparation and review of Hydro Test Package and witness of Hydrostatic test.
•Witnessing Procedure Qualification Tests and Review PQR Record according to Code Requirements.
•Witnessing of Destructive & Non- Destructive testing for Procedure Qualification Tests.
•Witnessing Welder Performance Qualification Test as per ASME section IX.
•Checking Welding Consumables, Welder Qualification, Preheat and Inter-pass temperature and other Essential welding parameters as per WPS.
•Visual Inspection of finished weld joints.
•Monitoring NDE activities and attending repairs.
•Reviewing PWHT charts (heating and cooling rate, soaking temperature and time) and Hardness reports.
•A daily routine inspection and coordination with client inspectors for smooth and timely approval of inspection documents.
•Providing technical information and guidance to subcontractor inspection personnel and enabling them to be pro-active on their respective area of concern.
•Coordination with Field Engineering Department to resolve Construction & Inspection related Issues.
•Review and approval of subcontractor Method Statement, Quality Control Procedures, Inspection and Test Plan before submitting to client for final approval.
•QC documentation and Record control.
•Review of Final Disposition Report for Equipments.
•Project mobilization and monitoring of project activities.
•Coordinate with subcontractors, client and consultant.
•Dealing contractual issues with subcontractors, client and consultant.
•Knowledge of various kinds of Welding Processes, NDT and Fabrication Processes.
•Knowledge of various international codes and standards -
ASME Sec II, IX, VIII Div.1, TEMA, API 1104, API686 and ASME B31.3
•Possess good skill in inspection report writing and documentation.
PROFESSIONAL EXPERIENCE - DURATION / POSITION HELD / COMPANY/ CLIENT/ PROJECT
•NOV 19, 2006 TO PRESENT-QC MECH. EQUIPMENT INSPECTOR.
Bechtel-Technip J.V. (BTJV)
Saudi Arabian Oil Company.
Khursaniyah Gas Plant Project,KSA.
•JUNE 6 TO OCT 10, 2006- QC WELDING INSPECTOR.
Saudi Arabian Fertilizer Company (SAFCO)
Primary Reformer Revamp & De-bottlenecking
Shutdown Project, Al-Jubail, KSA.
•APR 07, 2005 TO APR 02, 2006- QC MECHANICAL INSPECTOR.
Saudi Arabian Kent Co. Ltd.
Shaybah Gas Compression Upgrade Project.
Saudi Aramco, GOSP-2, KSA.
•JAN 03, 2004 TO FEB 10, 2005- MECHANICAL SUPERVISOR.
Al Hassan Engineering Co. S.A.O.G.
Petroleum Development of Oman.
Saih-Nihayada gas plant & associated facilities, Oman.
•APR 23, 2003 TO DEC 17, 2003.- EQUIPMENT ENGINEER.
Newton Engineering & Chemicals Ltd
L & T- Chiyoda
Indian Oil Corporation Ltd, Assam, India.
•AUG 12, 2000 TO APR 16, 2003-RESIDENT ENGINEER.
Newton Engineering & Chemicals Ltd.
Engineers India Limited.
Smelter Expansion Project.
National Aluminum Company (NALCO), India.
•APR 02, 1999 TO AUG 10, 2000.- PIPING ENGINEER.
Newton Engineering & Chemicals Ltd.
SRU & FCCU Project.
Indian Oil Corporation Ltd, Haldia refinery, India.
•DEC 04, 1998 TO MAR 31, 1999. - PIPING SUPERVISOR.
Dodsal Ltd, India.
Indian Oil Corporation Ltd, Haldia Refinery, India.
•FEB 11, 1998 TO DEC 02, 1999.- MECHANICAL SUPERVISOR.
Dodsal Ltd, India.
Mannesmann Demag Ag.
Bio-Oxygen Furnace Convertor Shop,
Jindal Vijaynagar Steel Ltd, Bellary, Karnataka, India.
•MAY 01, 1997 TO FEB 06, 1998.- SITE ENGINEER.
Project Construction Co. PVT. LTD.
Continuous Casting Plant,
Jindal Vijaynagar Steel Ltd,
Bellary, Karnataka, India.
•APR 15, 1995 TO APR 20, 1997. - SITE ENGINEER.
Project Construction Co. Pvt. Ltd, India.
Slab Caster, Ladle Heating Furnace & Fume Extraction Project. Steel Authority of India, Rourkela, Orissa.
•MAR 14, 1988 TO APR 04, 1995 - QC ENGINEER.
Newton Engineering & ChemicalsLtd.
Vadodara, Gujarat, India.