Jeremy Cooper Resume
NDT.org Member Since: 2010
Added: 2/16/2010
Last Updated: 2/16/2010
Last Updated: 2/16/2010
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
AR Arkansas
Country:
United States
Status:
I am willing to Travel.
I need a job as soon as possible.
I need a job as soon as possible.
Certifications
Level II MT, PT, UT Thickness, and VT I, and Visual Weld inspector.
Education
Education
The Ocean Corporation
Graduated April 2004
Houston, TX
Ultimate Diver Training
Certified: Level II Magnetic Particle testing, level II Dye Penetrate testing, Remotely Operated vehicles, Hazardous Material handling, level II UT thickness inspection , Heavy equipment operator, Master diver, under water welding and cutting, 40 Hr. radiation safety course and lift truck operator. Also CPR Certified and First Aid Certified.
University of Arkansas
1997-1998
Hope, Arkansas
English, Algebra 1, communication and the beginning forestry courses.
Gurdon High School
Graduated June 1997
Gurdon, Arkansas
Diploma
The Ocean Corporation
Graduated April 2004
Houston, TX
Ultimate Diver Training
Certified: Level II Magnetic Particle testing, level II Dye Penetrate testing, Remotely Operated vehicles, Hazardous Material handling, level II UT thickness inspection , Heavy equipment operator, Master diver, under water welding and cutting, 40 Hr. radiation safety course and lift truck operator. Also CPR Certified and First Aid Certified.
University of Arkansas
1997-1998
Hope, Arkansas
English, Algebra 1, communication and the beginning forestry courses.
Gurdon High School
Graduated June 1997
Gurdon, Arkansas
Diploma
Experience
Work Experience
Smith International, Inc.-Searcy, AR
January 2010- Present
Inspect drill pipe and drill pipe connections at rig locations using, but not limited to, fluorescent and dry magnetic particle inspections. Dimensional analysis depending upon customer requirements. Electro magnetic induction inspection of drill pipe. Also responsible for field sales, billing, and maintaining relationships with the customer.
URS-Washington Group
2007-2009 (contract jobs)
Level II MT, PT, UT Thickness, and VT I, and Visual Weld inspector. FAC inspections in multiple nuclear facilities, QC inspector, BOP. Responsible for any inspection throughout the facility during shutdown, at times designated to specifically turbine deck.
Valero Refinery –Memphis, TN
January 2009-July 2009
QC/NDT inspector over weld fabrication shop. Responsible for Positive Material Identification (PMI) of all received material. MT, PT, UT, and/or VT inspection of all shop welds. Responsible for keeping welders continuity log and certifications current. Maintained inspection and PMI data using various computer programs.
Conam Inspection
(Contract jobs)
Alabama
Responsible for the internal and external visual inspections of pressure vessels and above ground tanks. Operated fiber optic scope for non-entry inspections. Provided appropriate QA and performed QC of equipment fabrication and installation to assure compliance with engineering specifications, drawings and applicable codes, standards, and jurisdictional requirements. Maintained inspection records-including verification and recording of inspection measurements, observations, and other pertinent information; it also includes analysis of information gathered, determination of corrosion rates and remaining service life. Performed pressure equipment inspection to assure mechanical integrity and safety.
Quad City Testing Laboratory, Inc.
2008-2008
Eddyville, IA
Implementing a mechanical integrity program into Cargill corn milling facility. Was responsible for, but not limited to, mag-particle, dye penetrant, and ultrasonic inspections of many different components. I also created isometric drawings and redlined previous drawings, assigned TML points and recorded thickness surveys in accordance with the proper inspection code. Did internal and external API vessel and tank inspections.
Shaw Pipeline Services
2006-contract jobs
Responsible for setting up and maintaining AUT scanners, which included wiring of electrical systems, setting up probes and wedges, and trouble shooting any problems with the AUT system. Also MIP on weld repairs.
Nacher Corporation
2004-2006
Houston Texas
Level II Lead Inspector: UT thickness, Magnetic Particle, and Visual coating and corrosion inspection of off shore drilling rigs and bottle barges. I coordinated two to four men inspection teams on off shore rigs. The inspections comply with the American Beaureau of shipping codes. I also attended meetings with clients to discuss any findings, safety issue reports, entry permits, and answer any questions of the client. I utilized Microsoft Word and Microsoft Excel to produce extensive reports regarding findings from the testing on the followings but not limited to: Ultrasonic Thickness, Magnetic Particle, Visual coating and
corrosion inspections.
H&G Inspection
2004-2004
Houston, Texas
Level 1 Inspector: Pipe Thickness Inspection at Texas City BP Plant, assistant X-Ray technician on several pipeline and fabrication jobs, responsible for setting up X-Ray camera and film for shots and also developing film.
Stone Construction
1999-2003
Magnet Cove, Arkansas
Contract Laborer: All aspects of foundation repair and new construction. This includes leveling, sawing, jack hammers, hydraulic jacks interior/exterior remolding, painting, roofing, framing, flooring, and siding. I was also responsible for the bidding of some projects.
Smith International, Inc.-Searcy, AR
January 2010- Present
Inspect drill pipe and drill pipe connections at rig locations using, but not limited to, fluorescent and dry magnetic particle inspections. Dimensional analysis depending upon customer requirements. Electro magnetic induction inspection of drill pipe. Also responsible for field sales, billing, and maintaining relationships with the customer.
URS-Washington Group
2007-2009 (contract jobs)
Level II MT, PT, UT Thickness, and VT I, and Visual Weld inspector. FAC inspections in multiple nuclear facilities, QC inspector, BOP. Responsible for any inspection throughout the facility during shutdown, at times designated to specifically turbine deck.
Valero Refinery –Memphis, TN
January 2009-July 2009
QC/NDT inspector over weld fabrication shop. Responsible for Positive Material Identification (PMI) of all received material. MT, PT, UT, and/or VT inspection of all shop welds. Responsible for keeping welders continuity log and certifications current. Maintained inspection and PMI data using various computer programs.
Conam Inspection
(Contract jobs)
Alabama
Responsible for the internal and external visual inspections of pressure vessels and above ground tanks. Operated fiber optic scope for non-entry inspections. Provided appropriate QA and performed QC of equipment fabrication and installation to assure compliance with engineering specifications, drawings and applicable codes, standards, and jurisdictional requirements. Maintained inspection records-including verification and recording of inspection measurements, observations, and other pertinent information; it also includes analysis of information gathered, determination of corrosion rates and remaining service life. Performed pressure equipment inspection to assure mechanical integrity and safety.
Quad City Testing Laboratory, Inc.
2008-2008
Eddyville, IA
Implementing a mechanical integrity program into Cargill corn milling facility. Was responsible for, but not limited to, mag-particle, dye penetrant, and ultrasonic inspections of many different components. I also created isometric drawings and redlined previous drawings, assigned TML points and recorded thickness surveys in accordance with the proper inspection code. Did internal and external API vessel and tank inspections.
Shaw Pipeline Services
2006-contract jobs
Responsible for setting up and maintaining AUT scanners, which included wiring of electrical systems, setting up probes and wedges, and trouble shooting any problems with the AUT system. Also MIP on weld repairs.
Nacher Corporation
2004-2006
Houston Texas
Level II Lead Inspector: UT thickness, Magnetic Particle, and Visual coating and corrosion inspection of off shore drilling rigs and bottle barges. I coordinated two to four men inspection teams on off shore rigs. The inspections comply with the American Beaureau of shipping codes. I also attended meetings with clients to discuss any findings, safety issue reports, entry permits, and answer any questions of the client. I utilized Microsoft Word and Microsoft Excel to produce extensive reports regarding findings from the testing on the followings but not limited to: Ultrasonic Thickness, Magnetic Particle, Visual coating and
corrosion inspections.
H&G Inspection
2004-2004
Houston, Texas
Level 1 Inspector: Pipe Thickness Inspection at Texas City BP Plant, assistant X-Ray technician on several pipeline and fabrication jobs, responsible for setting up X-Ray camera and film for shots and also developing film.
Stone Construction
1999-2003
Magnet Cove, Arkansas
Contract Laborer: All aspects of foundation repair and new construction. This includes leveling, sawing, jack hammers, hydraulic jacks interior/exterior remolding, painting, roofing, framing, flooring, and siding. I was also responsible for the bidding of some projects.
Comments
Well versed with computer skills and programs including Microsoft Word, Excel, and PowerPoint. Have knowledge of codes: API 1104, API 570, API 510, B 31.3, B 31.1, and ASME codes. Very knowledgeable of all parametric UT scopes. Have excellent people skills and work well alone or with others in order to achieve optimal results
