Quality Inspector/ NDT
NDT.org Member Since: 2014
Added: 11/17/2014
Last Updated: 11/17/2014
Last Updated: 11/17/2014
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
KS Kansas
Country:
United States
Status:
Currently working but always looking.
I am willing to work overseas.
I am willing to work overseas.
Certifications
level 2 penetrant inspector
Education
A.A.S in non-destructive testing
Experience
8 years in quality aerospace , and 3 years doing NDT inspection
Comments
Wade A. Bartel
Phone # 316-880-0038
Email: slider520@msn.com
Objective NDT inspector
Strengths
• Mechanically incline
• Computer/Software
• Knowledgeable in chemical processes
• Process/Product Improvement
• Heat treat low/high temps oven operator
• Knowledgeable in Precision Measuring Equipment and Tools/Machines including Lathes, power drills, dremel, basic hand/power tools, micrometers, bore & thickness gauges, calipers, microscopes .
Work Experience
Oct 2011 -Present Spirit Aerosystems Wichita, KS
Job Title: Certified Level II Penetrant Inspector
• Perform fluorescent penetrant inspection to ASNT 1417, NAS 410 standards and to customer's specifications and internal work instructions. Process/ evaluate aluminum/titanium aerospace parts, write nonconformance reports/tags when relevant indications our present. Forward discrepancy information to engineering for further disposition.
• Document inspection data/daily checks/surveillance accurately on required forms.
• Operate/Monitor automated anti-static penetrant process (100 line ) by verifying parts our being processed to spec. and requirements are being met and recorded in digital system ( FDAQ computer software ) , also operate liquid penetrant process manual ( 200) line.
• Experience in Magnetic particle inspection of steel parts.
• Responsible for training new inspectors in "Spirit" process & test specifications including First Article Inspections (FAI) and uses of calibrated instruments/tools as required. Interpret customer specifications, engineering drawings and visual aids to existing manufacturing requirements, follow given work instructions in work order, write nonconformance reports, and investigate root cause.
• Assist management and co-workers with lean manufacturing methods for process improvements and assist customer service with continuous flow of production and on-time delivery.
• Team player
May 08"-Oct 11" Chrome Plus International ( 316-944-3600) Wichita, KS
Job Title: Lead Final Inspector
• Assist quality manager with customer, OEM, AS9100 and Nadcap audits, write disposition on nonconformance parts and answer nonconformance reports. Perform internal pre-audits. Create quality work instructions and work procedures using customer specifications. Perform gap analysis to set up new process lines. Perform and schedule calibration on all precision measuring tools, shop and lab equipment
• Perform final inspection to specifications and internal work instructions, using calibrated tools/instruments such as – micrometers, thickness, gauges, air gauges to meet critical dimensional/visual requirements.
• Review customers purchase order to verify work order/process preformed was correct and approved before signing certification form that goes with parts to final customer.
• Understanding of chemical processing and characteristic against metal components.
• Preform Nital Etch inspection on steel landing gear parts, evaluate and record results.
• Responsible for training new inspectors in CPI process & test specifications including First Article Inspections (FAI) and uses of calibrated instruments/tools as required. Interpret customer specifications, engineering drawings and visual aids to existing manufacturing requirements, follow given work instructions in work order, write nonconformance reports, investigate root cause & assist with lean manufacturing methods for process improvements.
• Certified to inspect. Multiple surface enchantment processes following AS9100 Quality procedures and NADCAP, such as shot-peening, chem-film/alodine, cadmium plating, electro-less nickel plating, anodize, hard chrome, Primer, Topcoat and tefflon of aerospace parts.
• Experienced in Final inspection for steel parts and wet processes for aluminum parts including paint.
• Preform stress relieving, heat treating and hydrogen embrittlement on steel parts
• Assist Quality and Planning managers in work flow improvement, minimize work order and maximize production turn time while meeting all requirements.
Education
Mulvane High school class of 2006
Cowley Community College class of 2010
Associate of Applied Science - Nondestructive Testing technology
NDT Courses/Methods
Ultrasonic Testing I,II,III , Eddy Current Test I,II ,Industrial Materials Blueprint Reading Advanced NDT Methods Radiographic Test I,II, and Radiation Safety Mag. Particle/Pen Codes and Practices VISUAL INSPECTION.
References: Available upon request
Phone # 316-880-0038
Email: slider520@msn.com
Objective NDT inspector
Strengths
• Mechanically incline
• Computer/Software
• Knowledgeable in chemical processes
• Process/Product Improvement
• Heat treat low/high temps oven operator
• Knowledgeable in Precision Measuring Equipment and Tools/Machines including Lathes, power drills, dremel, basic hand/power tools, micrometers, bore & thickness gauges, calipers, microscopes .
Work Experience
Oct 2011 -Present Spirit Aerosystems Wichita, KS
Job Title: Certified Level II Penetrant Inspector
• Perform fluorescent penetrant inspection to ASNT 1417, NAS 410 standards and to customer's specifications and internal work instructions. Process/ evaluate aluminum/titanium aerospace parts, write nonconformance reports/tags when relevant indications our present. Forward discrepancy information to engineering for further disposition.
• Document inspection data/daily checks/surveillance accurately on required forms.
• Operate/Monitor automated anti-static penetrant process (100 line ) by verifying parts our being processed to spec. and requirements are being met and recorded in digital system ( FDAQ computer software ) , also operate liquid penetrant process manual ( 200) line.
• Experience in Magnetic particle inspection of steel parts.
• Responsible for training new inspectors in "Spirit" process & test specifications including First Article Inspections (FAI) and uses of calibrated instruments/tools as required. Interpret customer specifications, engineering drawings and visual aids to existing manufacturing requirements, follow given work instructions in work order, write nonconformance reports, and investigate root cause.
• Assist management and co-workers with lean manufacturing methods for process improvements and assist customer service with continuous flow of production and on-time delivery.
• Team player
May 08"-Oct 11" Chrome Plus International ( 316-944-3600) Wichita, KS
Job Title: Lead Final Inspector
• Assist quality manager with customer, OEM, AS9100 and Nadcap audits, write disposition on nonconformance parts and answer nonconformance reports. Perform internal pre-audits. Create quality work instructions and work procedures using customer specifications. Perform gap analysis to set up new process lines. Perform and schedule calibration on all precision measuring tools, shop and lab equipment
• Perform final inspection to specifications and internal work instructions, using calibrated tools/instruments such as – micrometers, thickness, gauges, air gauges to meet critical dimensional/visual requirements.
• Review customers purchase order to verify work order/process preformed was correct and approved before signing certification form that goes with parts to final customer.
• Understanding of chemical processing and characteristic against metal components.
• Preform Nital Etch inspection on steel landing gear parts, evaluate and record results.
• Responsible for training new inspectors in CPI process & test specifications including First Article Inspections (FAI) and uses of calibrated instruments/tools as required. Interpret customer specifications, engineering drawings and visual aids to existing manufacturing requirements, follow given work instructions in work order, write nonconformance reports, investigate root cause & assist with lean manufacturing methods for process improvements.
• Certified to inspect. Multiple surface enchantment processes following AS9100 Quality procedures and NADCAP, such as shot-peening, chem-film/alodine, cadmium plating, electro-less nickel plating, anodize, hard chrome, Primer, Topcoat and tefflon of aerospace parts.
• Experienced in Final inspection for steel parts and wet processes for aluminum parts including paint.
• Preform stress relieving, heat treating and hydrogen embrittlement on steel parts
• Assist Quality and Planning managers in work flow improvement, minimize work order and maximize production turn time while meeting all requirements.
Education
Mulvane High school class of 2006
Cowley Community College class of 2010
Associate of Applied Science - Nondestructive Testing technology
NDT Courses/Methods
Ultrasonic Testing I,II,III , Eddy Current Test I,II ,Industrial Materials Blueprint Reading Advanced NDT Methods Radiographic Test I,II, and Radiation Safety Mag. Particle/Pen Codes and Practices VISUAL INSPECTION.
References: Available upon request
