NDT RT Level II, Film Interpreter, Technician
NDT.org Member Since: 2015
Added: 2/17/2015
Last Updated: 2/17/2015
Last Updated: 2/17/2015
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
CA California
Country:
United States
Status:
I need a job as soon as possible.
I prefer permanent jobs.
I prefer permanent jobs.
Certifications
Certifications: Don Bosco Institute, Rosemead, CA.
•Radiography 1-102A course completed, Certificate Issued.
•Radiography 2-102B course completed, Certificate Issued.
•Radiography Film Interpretation- Welds-215.
•Magnetic Particle and Penetrant Inspection 104A- course completed, Certificate Issued.
•Certified NDT RT level II, Film Interpreter by Miller Castings, expire 11/2016.
•Radiography 1-102A course completed, Certificate Issued.
•Radiography 2-102B course completed, Certificate Issued.
•Radiography Film Interpretation- Welds-215.
•Magnetic Particle and Penetrant Inspection 104A- course completed, Certificate Issued.
•Certified NDT RT level II, Film Interpreter by Miller Castings, expire 11/2016.
Education
Education: •Don Bosco Technical Institute: Non Destructive Testing Radiography, Level I, II course’s completed.
•Don Bosco Technical Institute: Interpreter & Technician, Magnetic Particle & Penetrant
East Los Angeles College, Cerritos College.
•Don Bosco Technical Institute: Interpreter & Technician, Magnetic Particle & Penetrant
East Los Angeles College, Cerritos College.
Experience
Have 8 years of NDT RT experience.
Experience: •Certified NDT RT level II, Film Interpreter, expire 11/2016.
•Ensure that the procedures and specifications are met prior to, during and after x-ray
•Non-destructive testing Conduct tests, interpret and evaluate for acceptance or rejection and document.
•Provide necessary guidance and /or supervision to trainees, Level I and Level II technicians in the technique in which they are certified.
•Familiar with codes, standards, and other contractual documents that control the method as utilized by the employer.
•Develop written instructions for radiography from approved general procedures. X-ray testing-exposure, pipe welds and interpretation of film.
•Training of lesser experienced technicians preparation and approval of techniques and reports
•Calibration and maintenance of equipment Calibration monitoring Interface with engineering, production and customers, training in CR machine.
•Worked in the Aerospace industry for approximately 8 years.
•Non Destructive Testing Radiography Technician, Film Interpreter, Supervisor, Gamma ray, Per ASNT, Drove forklift, supervised swing shift, was responsible for having all of the companies hot-rush jobs ready for the next day completed.
•Companies worked for Teledyne Cast Products, X-Ray Products Corp, General Inspection Labs, Amcast. X-Rayed & interpret a variety of alloys per customer specifications, such as Mil-STD-453, AMS 2175A, PS21206, EMS92375 and GPS5101-1 for nondestructive testing labs, read blueprints.
Experience: •Certified NDT RT level II, Film Interpreter, expire 11/2016.
•Ensure that the procedures and specifications are met prior to, during and after x-ray
•Non-destructive testing Conduct tests, interpret and evaluate for acceptance or rejection and document.
•Provide necessary guidance and /or supervision to trainees, Level I and Level II technicians in the technique in which they are certified.
•Familiar with codes, standards, and other contractual documents that control the method as utilized by the employer.
•Develop written instructions for radiography from approved general procedures. X-ray testing-exposure, pipe welds and interpretation of film.
•Training of lesser experienced technicians preparation and approval of techniques and reports
•Calibration and maintenance of equipment Calibration monitoring Interface with engineering, production and customers, training in CR machine.
•Worked in the Aerospace industry for approximately 8 years.
•Non Destructive Testing Radiography Technician, Film Interpreter, Supervisor, Gamma ray, Per ASNT, Drove forklift, supervised swing shift, was responsible for having all of the companies hot-rush jobs ready for the next day completed.
•Companies worked for Teledyne Cast Products, X-Ray Products Corp, General Inspection Labs, Amcast. X-Rayed & interpret a variety of alloys per customer specifications, such as Mil-STD-453, AMS 2175A, PS21206, EMS92375 and GPS5101-1 for nondestructive testing labs, read blueprints.
Experience: •Certified NDT RT level II, Film Interpreter, expire 11/2016.
•Ensure that the procedures and specifications are met prior to, during and after x-ray
•Non-destructive testing Conduct tests, interpret and evaluate for acceptance or rejection and document.
•Provide necessary guidance and /or supervision to trainees, Level I and Level II technicians in the technique in which they are certified.
•Familiar with codes, standards, and other contractual documents that control the method as utilized by the employer.
•Develop written instructions for radiography from approved general procedures. X-ray testing-exposure, pipe welds and interpretation of film.
•Training of lesser experienced technicians preparation and approval of techniques and reports
•Calibration and maintenance of equipment Calibration monitoring Interface with engineering, production and customers, training in CR machine.
•Worked in the Aerospace industry for approximately 8 years.
•Non Destructive Testing Radiography Technician, Film Interpreter, Supervisor, Gamma ray, Per ASNT, Drove forklift, supervised swing shift, was responsible for having all of the companies hot-rush jobs ready for the next day completed.
•Companies worked for Teledyne Cast Products, X-Ray Products Corp, General Inspection Labs, Amcast. X-Rayed & interpret a variety of alloys per customer specifications, such as Mil-STD-453, AMS 2175A, PS21206, EMS92375 and GPS5101-1 for nondestructive testing labs, read blueprints.
Experience: •Certified NDT RT level II, Film Interpreter, expire 11/2016.
•Ensure that the procedures and specifications are met prior to, during and after x-ray
•Non-destructive testing Conduct tests, interpret and evaluate for acceptance or rejection and document.
•Provide necessary guidance and /or supervision to trainees, Level I and Level II technicians in the technique in which they are certified.
•Familiar with codes, standards, and other contractual documents that control the method as utilized by the employer.
•Develop written instructions for radiography from approved general procedures. X-ray testing-exposure, pipe welds and interpretation of film.
•Training of lesser experienced technicians preparation and approval of techniques and reports
•Calibration and maintenance of equipment Calibration monitoring Interface with engineering, production and customers, training in CR machine.
•Worked in the Aerospace industry for approximately 8 years.
•Non Destructive Testing Radiography Technician, Film Interpreter, Supervisor, Gamma ray, Per ASNT, Drove forklift, supervised swing shift, was responsible for having all of the companies hot-rush jobs ready for the next day completed.
•Companies worked for Teledyne Cast Products, X-Ray Products Corp, General Inspection Labs, Amcast. X-Rayed & interpret a variety of alloys per customer specifications, such as Mil-STD-453, AMS 2175A, PS21206, EMS92375 and GPS5101-1 for nondestructive testing labs, read blueprints.
Comments
Continued:
•Perform radiographic inspection on composite structures, pipe welds and assemblies and prepares electronic reports of findings.
•Develop and document NDT techniques. Perform and report NDT related investigations in writing.
•Complied test procedures including the review of referenced or related codes, specifications, standards, and quality assurance instructions.
•Understand the scope and limitations of methods used.
•Maintain accurate daily labor input and all other required record keeping and traceability recordings. Understand and complies with safety regulations.
•Actively participate in Safety and Housekeeping related activities, Shipping and receiving
Eagerly seeking NDT Radiography Level II employment
•Perform radiographic inspection on composite structures, pipe welds and assemblies and prepares electronic reports of findings.
•Develop and document NDT techniques. Perform and report NDT related investigations in writing.
•Complied test procedures including the review of referenced or related codes, specifications, standards, and quality assurance instructions.
•Understand the scope and limitations of methods used.
•Maintain accurate daily labor input and all other required record keeping and traceability recordings. Understand and complies with safety regulations.
•Actively participate in Safety and Housekeeping related activities, Shipping and receiving
Eagerly seeking NDT Radiography Level II employment
