CWI / Level II NDE
NDT.org Member Since: 2016
Added: 8/4/2016
Last Updated: 8/4/2016
Last Updated: 8/4/2016
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
FL Florida
Country:
United States
Status:
I am willing to Travel.
Currently working but always looking.
I prefer permanent jobs.
Currently working but always looking.
I prefer permanent jobs.
Certifications
AWS Certified Welding Inspector – Certification Number 15071141
ASNT-TC-1A Level II PT, MT, VT, RT, UTS, UTT
NAS-410 Level II PT, UT, RT, ET
Additional Skill through experience and training –White Light Borescope inspections, Computer training using Microsoft Office, Welder Qualification Testing, PQR and WPS generation.
ASNT-TC-1A Level II PT, MT, VT, RT, UTS, UTT
NAS-410 Level II PT, UT, RT, ET
Additional Skill through experience and training –White Light Borescope inspections, Computer training using Microsoft Office, Welder Qualification Testing, PQR and WPS generation.
Education
USAF Technical Training School for Nondestructive Inspection–Pensacola NAS, Pensacola Florida, Graduated 2006
Dupont “Stop for Safety Program”
USAF In-house Training–HAZCOM, FOD Awareness, Flight line Safety etc.
OSHA Phosphate Safety Training–16 Hours, Polk Community College 2009 and 2010
Zephyrhills High School–Zephyrhills Florida, Graduated 2005
Dupont “Stop for Safety Program”
USAF In-house Training–HAZCOM, FOD Awareness, Flight line Safety etc.
OSHA Phosphate Safety Training–16 Hours, Polk Community College 2009 and 2010
Zephyrhills High School–Zephyrhills Florida, Graduated 2005
Experience
Dixie Southern Industrial, Inc. March 2016 – Present
Quality Control Manager
Responsible for the timely inspection of all structural building components from pre-fabrication until final surface finish and coatings are applied and for the timely review of and disposition of all nonconformances found in the shop. Also responsible for the implementation and maintenance of a quality program and all related procedures and certifying and maintaining active certifications for welding and quality control personnel. Reviewed all drawings that are released for fabrication to ensure all welding symbols and detailing allow for code compliance and ease of fabrication. Attended all job kickoff meetings to discuss any potential quality related issues that may be encountered during fabrication and to ensure compliance with customer specifications.
SMCI / Metaltek August 2013 – March 2016
Level II Quality Control Technician / Lead Level II Quality Control Technician
Inspection of Nuclear Safety Related Components built for Vogtle Units #3 and #4, as well as VC Summer Units #2 and #3 including but not limited to CA03 modules, CA05 components, CB Modules, Overlay plates etc.
Visual and NDE Inspection of NQA-1 Nuclear Safety Related Components for MEP/SPX
Visual and NDE Inspection of Commercial Energy related components for Siemens Energy, including Exhaust Manifolds, Inlet Manifolds and Turbine Pipe Racks.
Visual and NDE Inspections done to multiple codes and specifications such as: ASME Sec. III, ASME Sec. VIII, B31.1, B31.3, AWS D1.1, AWS D1.2, and AWS D1.6.
Turbomeca Manufacturing April 2011 –August 2013
Level II NDT Technician
Visual and NDE Inspection of numerous helicopter engine components in all stages of the engine including Turbine Casings, injection wheels, diffusers, blades, etc. using the following methods: Automated Immersion UT, ET, RT and FPI as well as direct, binocular, and borescope visual inspections.
Acuren Inspections January 2010 –December 2010
Level II NDE Technician
Responsible for the daily predictive maintenance inspections on process piping, tanks and pressure vessels in the 5 petrochemical process plants at my assigned Mosaic facility. Worked multiple outages for the various plants while maintaining accurate records and accountability of remaining life inspections on tanks and piping. Performed visual and NDE inspections including UTT, UTS, VT, MY, and PT to various codes including API 653, API 510, API 570 and AWS D1.1.
McKnight Testing Lab October 2009 –January 2010
Level II NDE Technician
Responsible for various day to day call out work around central Florida using UTS, UTT,RT, MT, PT and VT. Worked projects for multiple industries such as Petrochemical, Aerospace and Structural Steel Construction. Performed Visual and NDE inspections to various codes such as API 653, API 570, AWS D1.1, AWS D1.6, AWS D1.5, and ASME Section III.
Quality Inspection Services June 2009 –September 2009
Level II NDE Technician
Responsible for various day to day call out work around central Florida using UTS, UTT, RT, MT, PT and VT. Worked projects for multiple industries such as Petrochemical, Aerospace and Structural Steel Construction and Natural Gas. Performed visual and NDE inspections to various codes such as API 653, API 570, AWS D1.1, AWS D1.6, AWS D1.5, and ASME Section III, and various clients such as Progress Energy, Tampa Tank, and Mosaic Co.
United States Air Force March 2006 -March 2008
Nondestructive Inspection Journeyman
Received my classroom training, and received the Distinguished Graduate Award for graduating with a 98.4 average for the combined 10 block training classes. Responsible for the accurate and reliable visual and NDE inspections of the T-38, T-6, HC-130, A-10, and the HH-60 airframes as well as multiple types of aerospace ground equipment both in the shop in a laboratory setting as well as on the flight line in a fast-paced field type environment. Certified in the following methods: FPI, MT bench and yoke, UT, ET and X-ray.
Quality Control Manager
Responsible for the timely inspection of all structural building components from pre-fabrication until final surface finish and coatings are applied and for the timely review of and disposition of all nonconformances found in the shop. Also responsible for the implementation and maintenance of a quality program and all related procedures and certifying and maintaining active certifications for welding and quality control personnel. Reviewed all drawings that are released for fabrication to ensure all welding symbols and detailing allow for code compliance and ease of fabrication. Attended all job kickoff meetings to discuss any potential quality related issues that may be encountered during fabrication and to ensure compliance with customer specifications.
SMCI / Metaltek August 2013 – March 2016
Level II Quality Control Technician / Lead Level II Quality Control Technician
Inspection of Nuclear Safety Related Components built for Vogtle Units #3 and #4, as well as VC Summer Units #2 and #3 including but not limited to CA03 modules, CA05 components, CB Modules, Overlay plates etc.
Visual and NDE Inspection of NQA-1 Nuclear Safety Related Components for MEP/SPX
Visual and NDE Inspection of Commercial Energy related components for Siemens Energy, including Exhaust Manifolds, Inlet Manifolds and Turbine Pipe Racks.
Visual and NDE Inspections done to multiple codes and specifications such as: ASME Sec. III, ASME Sec. VIII, B31.1, B31.3, AWS D1.1, AWS D1.2, and AWS D1.6.
Turbomeca Manufacturing April 2011 –August 2013
Level II NDT Technician
Visual and NDE Inspection of numerous helicopter engine components in all stages of the engine including Turbine Casings, injection wheels, diffusers, blades, etc. using the following methods: Automated Immersion UT, ET, RT and FPI as well as direct, binocular, and borescope visual inspections.
Acuren Inspections January 2010 –December 2010
Level II NDE Technician
Responsible for the daily predictive maintenance inspections on process piping, tanks and pressure vessels in the 5 petrochemical process plants at my assigned Mosaic facility. Worked multiple outages for the various plants while maintaining accurate records and accountability of remaining life inspections on tanks and piping. Performed visual and NDE inspections including UTT, UTS, VT, MY, and PT to various codes including API 653, API 510, API 570 and AWS D1.1.
McKnight Testing Lab October 2009 –January 2010
Level II NDE Technician
Responsible for various day to day call out work around central Florida using UTS, UTT,RT, MT, PT and VT. Worked projects for multiple industries such as Petrochemical, Aerospace and Structural Steel Construction. Performed Visual and NDE inspections to various codes such as API 653, API 570, AWS D1.1, AWS D1.6, AWS D1.5, and ASME Section III.
Quality Inspection Services June 2009 –September 2009
Level II NDE Technician
Responsible for various day to day call out work around central Florida using UTS, UTT, RT, MT, PT and VT. Worked projects for multiple industries such as Petrochemical, Aerospace and Structural Steel Construction and Natural Gas. Performed visual and NDE inspections to various codes such as API 653, API 570, AWS D1.1, AWS D1.6, AWS D1.5, and ASME Section III, and various clients such as Progress Energy, Tampa Tank, and Mosaic Co.
United States Air Force March 2006 -March 2008
Nondestructive Inspection Journeyman
Received my classroom training, and received the Distinguished Graduate Award for graduating with a 98.4 average for the combined 10 block training classes. Responsible for the accurate and reliable visual and NDE inspections of the T-38, T-6, HC-130, A-10, and the HH-60 airframes as well as multiple types of aerospace ground equipment both in the shop in a laboratory setting as well as on the flight line in a fast-paced field type environment. Certified in the following methods: FPI, MT bench and yoke, UT, ET and X-ray.
