Carl Mcknight NDT Technician Level 2 RT,EC,UT,MT,PT,Ropes,BOSIET
NDT.org Member Since: 2016
Added: 8/11/2016
Last Updated: 8/11/2016
Last Updated: 8/11/2016
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
Country:
United Kingdom
Status:
I am willing to Travel.
I need a job as soon as possible.
I am willing to work overseas.
I need a job as soon as possible.
I am willing to work overseas.
Certifications
BOSIET, MIST, Offshore medical UK/Norwegian ALL UP TO DATE
Compressed air re-breather completed
IRATA Level 1 Rope Access 1/98524
PCN Level 2 RT- Radiography of welds/ Interpretation Exp. 2021 (need experience)
PCN Level 2 ET- Eddy Current Inspection: Exp. 2021 (need experience)
PCN Level 2 UT- Ultrasonics Inspection 3.1 Exp. 2021(need experience)
PCN Level 2 MT- Magnetic Particle Inspection: Exp. 2019
PCN Level 2 PT- Dye Penetrant Inspection: Exp. 2019
CCNSG Safety Passport
NETA Pressure Testing
Theory & Practical Cert no. 16090
Confined Space Level 3 & rescue
Falck Safety Services Teesside
Overhead & Gantry Crane Incorporating
Banksman & Slinging Cert No: 5964590
Full Clean UK Driving Licence
Compressed air re-breather completed
IRATA Level 1 Rope Access 1/98524
PCN Level 2 RT- Radiography of welds/ Interpretation Exp. 2021 (need experience)
PCN Level 2 ET- Eddy Current Inspection: Exp. 2021 (need experience)
PCN Level 2 UT- Ultrasonics Inspection 3.1 Exp. 2021(need experience)
PCN Level 2 MT- Magnetic Particle Inspection: Exp. 2019
PCN Level 2 PT- Dye Penetrant Inspection: Exp. 2019
CCNSG Safety Passport
NETA Pressure Testing
Theory & Practical Cert no. 16090
Confined Space Level 3 & rescue
Falck Safety Services Teesside
Overhead & Gantry Crane Incorporating
Banksman & Slinging Cert No: 5964590
Full Clean UK Driving Licence
Education
Coulby Newham Secondary School 1999-2004 9 GCSE gained.
Experience
2014 2016 STORK:-
Mearsk - Culzean wellhead access deck,
Heerema fabrication yard, Hartlepool.
Main duties for me were carrying out MPI and DPI of Columns, lifting lugs, weld preps and new welds.
As well as this I was also working alongside a 3 man team consisting of 9 men on weekends carrying out radiography on any welds to be tested out of hours and according to the clients preference.
GDF Suez Cygnus development project- PU Module.
Heerema fabrication, Hartlepool.
Duties carried out on PU module were MPI/DPI pipework ranging from 12 to 36 of Carbon Steel and exotic metals. PMI of Stainless Steel and Duplex.
Also working as a barrier man whilst Radiography was carried out on nights. i.e. setting flashing beacons and signage out, checking the dose rate does not exceed the safe working dose rate at the barrier, keeping other workers out etc.
GDF Suez Alfa and Bravo module. Heerema fabrication, Hartlepool
Carrying out NDT on the GDF Cygnus projects consisting of the construction of the Alpha and Bravo Drilling Platforms, duties include structural inspections (MPI, DPI).
The inspection of Carbon Steel and exotic pipework Duplex, Inconel, (MPI, DPI, PMI, Hardness testing).
R. Blacketts & Charlton, Newcastle- Upon- Tyne
Whilst working at RBC as well as carrying out daily MPI, DPI, PMI, and Hardness inspections of Carbon Steel, Stainless Steel, Duplex, Super Duplex and Inconel on pipework ranging from 1 up to 42
I was also working alongside another two men carrying out Hydro Pressure Testing, on pipework from something as low as 3Bar of pressure all the way up to over 500bar of pressurized water.
Working out the right correct torque for the torque wrench in order to tighten the bolts up, building the pressure up in stages in accordance with the procedure on a recorder clock, holding for the desired time, and releasing in stages once again.
Marine Fabrications, Haverton Hill, Middlesbrough
Carrying out MPI on structural framework, and the occasional Hardness checking to the clients specification
Pipetawse ltd, Redhall Engineering, Cape, Barrier Offshore, SBV
Visiting all the above fabrication shops on a weekly basis MPI and DPI testing carried out on pipework butt welds as well as PMI and Hardness testing, tying in with clients and ensuring all inspection work was carried out in a professional manner and in the correct timescale.
Radiography
For the last 5 months of working at stork I was shadowing an experienced Radiographer who had been in the trade for over 35 years. Learning and gaining some valuable experience in how to radiograph welds and castings, mainly castings which would come from Peel Jones Copper Products in which we would check for any cracks, tears, shrinkage etc on Copper Tuyeres and Copper Coolers which would then be placed in Furnaces all around the world on approval.
November 2013- January 2014
QA Weldtech:-
Once a career in NDT had been decided, I volunteered to do my 40 hours work placement at QA Weldtech after help from a friend and Robbie Harrison (Production Supervisor). Shadowing a few different men, I picked up valuable knowledge about welds, forges and castings which would set me in good stead towards my MPI/DPI examinations. Gaining experience and Learning at the same time.
Mearsk - Culzean wellhead access deck,
Heerema fabrication yard, Hartlepool.
Main duties for me were carrying out MPI and DPI of Columns, lifting lugs, weld preps and new welds.
As well as this I was also working alongside a 3 man team consisting of 9 men on weekends carrying out radiography on any welds to be tested out of hours and according to the clients preference.
GDF Suez Cygnus development project- PU Module.
Heerema fabrication, Hartlepool.
Duties carried out on PU module were MPI/DPI pipework ranging from 12 to 36 of Carbon Steel and exotic metals. PMI of Stainless Steel and Duplex.
Also working as a barrier man whilst Radiography was carried out on nights. i.e. setting flashing beacons and signage out, checking the dose rate does not exceed the safe working dose rate at the barrier, keeping other workers out etc.
GDF Suez Alfa and Bravo module. Heerema fabrication, Hartlepool
Carrying out NDT on the GDF Cygnus projects consisting of the construction of the Alpha and Bravo Drilling Platforms, duties include structural inspections (MPI, DPI).
The inspection of Carbon Steel and exotic pipework Duplex, Inconel, (MPI, DPI, PMI, Hardness testing).
R. Blacketts & Charlton, Newcastle- Upon- Tyne
Whilst working at RBC as well as carrying out daily MPI, DPI, PMI, and Hardness inspections of Carbon Steel, Stainless Steel, Duplex, Super Duplex and Inconel on pipework ranging from 1 up to 42
I was also working alongside another two men carrying out Hydro Pressure Testing, on pipework from something as low as 3Bar of pressure all the way up to over 500bar of pressurized water.
Working out the right correct torque for the torque wrench in order to tighten the bolts up, building the pressure up in stages in accordance with the procedure on a recorder clock, holding for the desired time, and releasing in stages once again.
Marine Fabrications, Haverton Hill, Middlesbrough
Carrying out MPI on structural framework, and the occasional Hardness checking to the clients specification
Pipetawse ltd, Redhall Engineering, Cape, Barrier Offshore, SBV
Visiting all the above fabrication shops on a weekly basis MPI and DPI testing carried out on pipework butt welds as well as PMI and Hardness testing, tying in with clients and ensuring all inspection work was carried out in a professional manner and in the correct timescale.
Radiography
For the last 5 months of working at stork I was shadowing an experienced Radiographer who had been in the trade for over 35 years. Learning and gaining some valuable experience in how to radiograph welds and castings, mainly castings which would come from Peel Jones Copper Products in which we would check for any cracks, tears, shrinkage etc on Copper Tuyeres and Copper Coolers which would then be placed in Furnaces all around the world on approval.
November 2013- January 2014
QA Weldtech:-
Once a career in NDT had been decided, I volunteered to do my 40 hours work placement at QA Weldtech after help from a friend and Robbie Harrison (Production Supervisor). Shadowing a few different men, I picked up valuable knowledge about welds, forges and castings which would set me in good stead towards my MPI/DPI examinations. Gaining experience and Learning at the same time.
Comments
A strong minded, self-motivated, confident individual with a great work ethic. Always striving to exceed expectations and have a constant drive to do so to further my career. Good communication and listening skills that enable easy interaction with people at all levels. Lateral and methodical thinker with a practical and logical approach to problems and their solutions. Thrive under pressure and the challenge of working to targets and deadlines. Proven career record of punctuality, reliability and commitment to achieving set goals through industry. Excellent practical skills, capable of working safely in all areas and under all conditions. Willing to work away to secure employment..
