QA/QC NDT Senior Inspection Specialist / ASNT SNT-TC-1A & NAS-410 Level II - UT/SW, AUT, PA/UT, ALW/UT, TOFD/UT, VT, MT, PT, RT
To see contact info and more resumes Get a Level II Subscription or Call (415) 469-0489.
State: TX Texas
Country: United States
Status:
I am willing to Travel.
I need a job as soon as possible.
I am willing to work overseas.
Certifications
Current or previous Qualifications and Certifications Obtained:
NAS-410 / ASNT SNT-TC-1A Level II UT & AUT (Ultrasonic Examination and Testing)
Techniques & Methods: Shear wave, Longitudinal wave, Angled Longitudinal Wave, Phased Array, TOFD / Automatic and semi-automatic
AUT scanners & equipment. Including Volumetric, Weld Quality, Flaw Detection, Flaw Sizing, Thickness, Crack Propagation Techniques
Experience with Guided wave & Immersion methods.
NAS-410 / ASNT SNT-TC-1A Level II VT (Visual Examination and Testing)
Techniques & Methods: Direct, Remote, Manual & Automated Video Borescopes.
NAS-410 / ASNT SNT-TC-1A Level II MT (Magnetic Particle Examination and Testing)
Techniques & Methods: Bench, Yoke, and Coil / Visible & Fluorescent techniques
NAS-410 / ASNT SNT-TC-1A Level II RT (Radiographic Examination and Testing)
Techniques & Methods: Iridium, Cobalt and X-Ray Tube, Manual and Digital film processing interpretation
NAS-410 / ASNT SNT-TC-1A Level II PT (Liquid Penetrant Examination and Testing)
Techniques & Methods: Solvent Removable, Water Washable, Post emulsifiable / Visible & Fluorescent
ANSI N45.2 Level II Mechanical / Electrical / Visual Inspector
Techniques and Methods: Receiving, In-Process, Assembly & Final Component Verification
NQA-1 / NRC 10 CFR Part 50 Appendix B, Compliant
Nuclear Material, Component & Document Review and vendor surveillance Inspector
Industries and facilities that I have worked in:
Petrochemical, Nuclear, Aerospace, Aviation & Marine industries, Refineries, Power Plants, Fabrication facilities, Aerospace research
facilities, Offshore Production platforms, Onshore Drilling rigs, Offshore Drilling platforms, Marine Vessels (for New Construction, Repair,
Classification & In-service Surveys)
Experienced in Codes and standards such as:
ASME BPV Section I, II, III, V, VIII, IX, XI etc.
NAVSEA (Multiple Specifications)
ABS Rules and Regulations Etc.
many others such as DNV, NRC, DOE, regulations etc.
Various job functions, duties, and positions I have served in:
NDT Level II Inspector (Multiple Methods)
Corporate NDT Level III
NDT Personnel Trainer / Testing Evaluator
NDT Project, Office & Division Manager
NDT Manager
QA/QC Manager
Education
1988 - 1990 Spartan College of Aeronautics and Technology
Airframe and Powerplant
QA/QC, NDT Classroom Training NDT Level II UT, MT, VT PT, RT, NDT
1990 - 1992 Kennesaw State University / Through AT&T
Computer Science, PC and Network Systems / Troubleshooting Diagnosis, & Repair
1996 - 1997 Northwest Shoals Community College / Through CODE Services Inc.
NDT Classroom Training NDT Level II UT, MT, VT, PT, RT, RT/FI, and Radiation Safety
1988 Tomball High / State of Texas
General Studies Completed General Education Diploma with the State of Texas
Experience
PROFESSIONAL PROFILE
CURRENT OR PREVIOUS QUALIFICATIONS
ASNT SNT-TC-1A Level II - UT/SW, AUT, PA/UT, ALW/UT, TOFD/UT, VT, MT, PT, RT
ASNT SNT-TC-1A - Corporate NDT Level III
NAS-410 Level II - UT/SW, VT, MT, PT, RT
ANSI N45.2.6 Level II - Mechanical / Electrical / Visual Inspector VT-1, 2, 3
NQA-1 & NRC 10 CFR Part 50 compliant qualified QA/QC Nuclear Inspector
Trained and Qualified to perform: Document Review, SOP procedure review, writing,
editing, and approval, Commercial Dedication of Safety Related Nuclear Material and
Components Material Traceability, SOP and Procedure writing & Review Document review
CAREER SUMMARY & OBJECTIVES
Professional Career Summary:
More than 25 Years of experience performing QA/QC & NDT Inspection, Examination &
Testing for the Nuclear, Defence, Aerospace, Aviation, Offshore, Subsea, Oil/Gas, Power
Generation, Pulp & Paper, Petrochemical & Refinery Industries.
Performing in the following duties & roles: of QA/QC/NDT Inspector, Project, Manager &
NDT Trainer, Consultation, Advisement, 3rd. Party Inspector, Vendor Auditor, Audit
preparation, NDT Project Management, Source Inspector, Vendor Surveillance, Program
Auditing and Client Oversight Representative.
Career Objectives:
My career objectives are to obtain a challenging position in a professional Inspection and
engineering environment where my resourcefulness experience, team management, and
QA/QC NDT inspection skills, will add value to organizational operations.
Qualified to perform inspection to the requirements of & experienced with multiple codes:
• ASME, ANSI, AISC, AWS, API, ISO, ABS, DNV, US Navy Nuclear/ NAVSHIPS 250 1500.
With qualifications per,
• ANSI N45.2.6 "Qualifications of Inspection Personnel for Nuclear Power Plants"
• NCR NQA-1 "Nuclear Quality Assurance (NQA-1) Certification Program"
• NRC 10 CFR Part 50 Appendix B "Quality Criteria for Nuclear & Fuel Reprocessing Plants"

EXPERIENCE
Turner NDT
QA/QC NDT Inspection Specialist, Contract QA/QC NDT Consultant
December 2011 -Present (5 Years 3 Months)
Positions, Qualifications, and Duties:
Accepted 1099 Contract positions, working as a QA/QC and NDT Inspection Advisor, for
various clients in the Nuclear Industry.
Projects and Services provided:
• 3rd Party QA/QC and NDT Inspection Advisement and Review
• 3rd party Document Review
• SOP, and Procedure Generation and review and Advisement
....................................................................................
Aqua-Chem Inc.
Corporate NDT Level III, QA/QC Inspector NDT Inspector Level II
March 2015 - May 2016 (1 year 3 months)
Positions and Certifications:
I was hired by Aqua-Chem to perform as their Corporate NDT Level III
Performed as Corporate NDT Level III, QA/QC Inspector NDT Inspector Level II
Corporate NDT Level III Duties included:
• Reviewing, Editing, Writing & Approving Quality Control and NDT Procedures, for
Aqua-Chem.
Training NDT Personnel, Maintaining NDT Personnel Training & documentation.
• Writing, Reviewing and Editing Aqua-chem QA/QC & NDT Procedures, SOP's & Work
Instructions.
Including Reviewing, Editing & Approving Subcontractor Quality Control and NDT
Procedures.
• Initiating, Monitoring & Resolving NCMR's NCR's & CAR's SCAR's
• Monitoring & approving inspection and documentation of Subcontractors performing
NDT Inspection UT Shearwave, Phased Array, Eddy Current Testing, Radiographic
Testing, including Review Interpretation, and acceptance of radiographic film.
• Working directly with Aqua-chem welding engineers to develop PQR's, WPQR's and
Welding Procedures, Monitoring Welders and equipment for work quality and adherence
to Welding procedures, Calculation of Heat Input of various welding processes for
generation welding procedures, NDT and Inspection of Test and Welder Qualification
Plates and Bend Tests for Quality Acceptance.NDT Level II / QC Inspection Duties Included:
• General NDT on the shop floor, Color removal Checks on Titanium and stainless
materials and welds.
• Dimensioning, Fit up, placement and alignment checks. as well as
Acoustic Testing, Hardness Testing, PMI Testing, Hydrogen Leak Testing, Ferrite Content
Testing, Dry film thickness and Coating Inspection.
• Witnessing and recording of Hydrostatic Pressure Testing.
QA/QC Document Review duties:
• Document Review & Approval of WPS, MTR's and Material type Origin Documentation.
• Representing Aqua-Chem for clients and Client Representatives and witnesses for final
sign offs, FATs, and client acceptance inspections.
• Performing Vendor audits, Vendor Surveillance, FATs, Review, and approval of Material
Tractability Documentation such as Material Test Reports, NDT reports & documentation
certifying country of origin and raw material origin status.
• Assuring compliance with industry, federal, project, and regulatory specifications.
Initiation and resolution of NCRs, CARs, SCARs & Initiating Material Specification
Documentation requests from vendors.
Inspected Items and Materials:
• Commercial water making & treatment systems as well as Navy Nuclear Components.
Such as components and "Navy Nuclear - NAVSHIPS 250 1500 ​" welds and support
equipment for on reactor feedwater Systems and Boiler Water sample coolers and
related equipment and "Titanium Lube Oil Coolers" for USN
Aircraft Carriers and USN Submarines.
• ASME Stamped and Unstamped Pressure Vessels, Piping, Storage Tanks, Boilers, Heat
Exchangers & Structural components for "Fresh Water Feed Systems" and "Potable
Water Treatment systems" such as "Vacuum Condensation Systems" and "Reverse
Osmosis Systems" Projects:
US Navy Nuclear components for Los Angeles class subs with GE PWR S6G reactors
US Navy Nuclear components Projects for Nimitz class carriers using A4W reactors
Samsung Heavy Industries (SHI) - Egina FPSO - Offshore
Including many other Commercial, Industrial, Medical, Pharmaceutical, Marine and
Offshore industries as well as systems & components for the US Navy, US Air Force, US
Army, and USMC
.................................................................
CB&I / Through APPLUS RTD
ASNT SNT-TC-1A Level II UTSW,VT,MT,PT / QA-QC, NDT & NQA-1 Final Component &Document Review Inspector
April 2014 - March 2015 (1 year)
Positions and Certifications:
QA/QC/NDT Inspector / ANST-SNT-TC-1A Level II UT/SW, PT, MT, VT
NQA-1 Document Review, and final component verification
Contracted as an NDT Inspection specialist to CB&I through Applus RTD and Buffalo
Staffing to perform Inspection of Nuclear containment structure modules, for
"Westinghouse AP-1000 Nuclear Reactors" for The Vogtle and VC Summer nuclear power
plant projects.
Responsibilities and Duties:
• Performed Initial NDT and Document Review Inspection of the Quality and Traceability
of construction materials, components and preparation for acceptability prior to release
for construction.
• Performed In-Process NDT and Document Review Inspection of the Quality and
Traceability of construction materials, components and work for acceptability during
construction and manufacturing.
• Performed Final NDT and Document Review Inspection of the Quality and Traceability
of construction materials, components and work for acceptability after completion of
construction and manufacturing.
• Appointed as a member of the Final Component Verification Team performing NDT,
and NQA-1 Document Review for Final Quality Inspection, Workflow Process Sheets,
Work Packages, Final Material and Component traceability of "Westinghouse AP-1000
Nuclear Reactor" containment structure modules, for completion of Final Documentation
Work Packages and compliance to Westinghouse, CB&I, as well as DOE, NRC 10 CFR
Part 50 Appendix B and NQA-1 Standards and Regulations.
Inspected Items and Materials:
• Westinghouse AP-1000 Nuclear Reactor Containment Structure Modules and internal
equipment Comprised of Duplex and Carbon steels, Structural members, Plates, Piping,
Pressure Vessels to AWS D1.1 D1.6 & ASME BPV Sec. III and ASME B31.1 & B31.3
Projects:
• Westinghouse AP-1000 Nuclear Reactor Containment Structure Modules
for the Vogtle Nuclear Power Plant Units 3 & 4
• Westinghouse AP-1000 Nuclear Reactor Containment Structure Modules
for the V.C. Summer Nuclear Power Plant Units 2 & 3
....................................
Westinghouse - Nuclear Fuel Services / PAR Nuclear
NQA-1 QA/QC Nuclear Receiving InspectorANSI N45.2.6 Level II Mechanical / Electrical / Visual Inspector
May 2012 - April 2014 (2 years)
Positions and Certifications:
ANSI N45.2.6 Level II Mechanical / Electrical / Visual Inspector
NQA-1 QA/QC Receipt Inspector Final Compliance Inspector for:
Nuclear Containment cranes, Nuclear fuel handling equipment, Outage critical cranes for
the nuclear power industry. Including spent Nuclear fuel-handling equipment and
refueling equipment for boiling water reactors and pressurized water nuclear reactor
plants cranes. Including, reactor containment polar and, cask-handling, turbine, and
outage-critical machines and equipment.
provided inspection of components for repair, modernization, and outage support, for
asset management, and installation services, as well as spare parts for products and
components used to handle the movement of Nuclear fuel and Nuclear fuel-related
equipment in commercial and military nuclear power plants
Duties:
• Nuclear QA/QC Receipt inspector and Document review Inspector for incoming &
outgoing Nuclear material and components for the process of Commercial Dedication of
“Safety-Related” Nuclear Materials and components for acceptable Release of Materials
and Components for use as relative to design and regulatory specifications for
performance & function.
• Inspection of incoming Components and Materials for Nuclear Reactor Fuel Handling
equipment and related parts and components
• Final Assembly Inspection, Final Component shipping Inspection
• NDT Advisor/ NDT Consultant on existing reactors and Westinghouse AP-1000 Nuclear
Reactor systems and fuel handling equipment
• Receiving inspection and Source Inspection Verification. Review and approval of
Accompanying documentation including NDT Inspection Reports Vendor surveillance,
and Vendor audits and Inspection
• Procedure and SOP Generation, Writing, Review, and editing for QA/QC/NDT
Inspection, Nuclear Receiving Operations, safety and material handling procedures
• Generating, Corrective Action and NonConformance Reports (CARs SCARs & NCRs)
• Collaborated with Project Engineers to determine actions and identify and rectify issues
with materials parts and components in relation to performance, function, and safety
• Ensured materials and component conformance to Westinghouse, PAR Nuclear, as well
as Client based, Procedures, Codes, and Standards as well as per ASME, ANSI, AWS,
DOE, NRC and NQA-1 requirements, and regulations
•Analyzed, dimensioned and inspected components and completed units for any
deviation for to requirements, specifications, and blueprints. as per contracts and codes
to ensure conformance and compliance to US codes and international standards
• Maintained, Monitored and Expedited calibration records and intervals for all M&TE
Including all GD&T, QC/NDT Instruments, and used at the facility.• Initiated tracked and closed non-conformance reports related to completion of
documentation in accordance with NRC / 10 CFR Part 50 Appendix B and NQA-1.
• Completed and approved Work package closeout and document review
•Witnessed Hydrostatic testing of pressure vessels and boundary layer components
•Implemented quality assurance policies concerning documentation and document
retention requirements
•Approved Subcontractor QC/NDE methods, instruments, techniques, and applications
as well as supplied written reports and discussion related of non-conformance results
Codes:
• Work to ASME BPV Code Section III, 10 CFR 50 Appendix B, 10 CFR 21, ASME NQA-1,
N45.6.2, N45.2.1, ASQ Z1.4 (MIL-STD-105D) and ASME Y14.5M 1994
•European Standards (EN): EN 571-1, EN ISO 3452-2 and EN ISO 3452-3 EN ISO
17637, EN ISO 5817 AND EN 473, EDF, as well as Korean, Chinese, codes &
requirements.
Inspected Items and Materials:
Fuel Transfer Machines, Spent Fuel Handling Machines, Nuclear Reactor containment
Polar Cranes, Refueling Machines, Nuclear Fuel Rod assembly Transfer Machines etc.
Projects:
Westinghouse AP-1000 Nuclear Reactors Polar Cranes and components, for many
Nuclear Facilities and projects in the US and around the world such as:
• Fukushima Daiichi Repair and mitigation work
• TVA Watts Bar Nuclear Power Plant Start-Up - Unit 2
• Westinghouse AP-1000 Nuclear Reactor, Polar crane, and Components
for the Vogtle Nuclear Reactors Units 3 & 4
• Westinghouse AP-1000 Nuclear Reactor, Polar crane, and Components
for the V.C. Summer Nuclear Reactors Units 2 & 3
...................................................................................
NACHER Corporation
NDT Division Manager
January 2009 - December 2011 (3 years)
Positions and Certifications:NDT Division Manager Corporate NDT Level III Trainer
NDT Level II Inspector UT/SW,VT,MT,PT
Duties:
Managed all NDT Inspection Division operations for the for the Nacher Corporation.
This included all responsibility for all 5 NDT Branch Offices.
• Organization of all major inspection projects for the corporation.
• Initial project walk downs for Job cost Estimates, Bids, and Equipment
• Logistics planning and job costing of all major projects.
• New business generation, Generation, and approval of all job proposals
• Assurance of compliance to, Industry, Federal, Regulations & requirements
• Advisement to clients on General and Advanced NDT methods.
• Hiring, Training Testing, and Qualification of NDT Inspectors.
• Evaluated division performance & recommended new strategies for improvements.
• Ensured that all non-conformance issues were fully addressed and closed.
• Addressed business inquiries from customers and team members in a professional
manner and resolved contested issues to acceptable completions.
• Identified resources, assigned workloads and managed project schedules.
• Ensured, compliance with company policies and procedures.
• Performed all employee recruitment, training, certification, performance evaluation
promotion, and termination activities
• Identified skill gaps and provided appropriate training to inspection personnel
• Developed and enforced best practices to ensure operational efficiency
• Implementation QMS per. ISO 9001 & adherence to Six sigma and LEAN Practices
• Identified & removed causes of defects & minimized variability in our processes
• Oversaw staffing adjustments to obtain maximum productivity
• Initiated new initiatives while maintaining productivity and quality
• Developed new business programs to meet productivity and revenue goals
• Provided guidance to employees & monitored performance, discipline & attendance
• Identified areas of improvements & developed action plans accordingly
• Processed client invoicing performed business accounting processes
• Procedure Writing and Review and technical document review for several clients
• Performance as a 3rd Party Inspector, Source Inspector & 3rd party Vendor Auditor &
Inspection for multiple clients.
....................................................................................
METCO - Materials Evaluation Technology Corporation
ASNT SNT-TC-1A NDT Level II UT/SW, AUT, TOFD, ALW/UT, UT/PA, VT, MT, PT, NDT
Project Manager, Marine Group Manager
December 2002 - January 2009 (6 years 2 months)
Positions and Certifications: Certified as ASNT SNT-TC-1A Level II In the methods of:
UT/SW, AUT, TOFD, ALW/UT, UT/PA, VT, MT, PT
NDT Inspector, Instructor, Project Manager, Manager for the Marine Inspection Group
Duties:
• NDT Inspector, METCO Marine Group Manager, NDT Project Manager
• NDT Field Supervisor, Shutdown NDT Project Manager.
• Source Inspector, Vendor Surveillance, Vendor Auditor, NDT Document Review
• Procedure Generation Writing, editing and Review.
• 3rd. Party Vendor Surveillance
• NDT Advisor to clients on General & Advanced NDT methods applications & limitations
• Training of multiple NDT Inspection Personnel in Basic and Advanced NDT Level II
Methods, Techniques, and Principles for NDT Level I & II Certification.
NDT Projects Managed for METCO:
• Manager of METCO Marine Inspection Group for all Marine Clients
• NDT Project Manager, Southeast Texas Industries, Flex Land Rig Project, Buna, TX
• NDT Project Manager, Southeast Texas Industries, Flex Land Rig Project, Vidor, TX
• NDT Project Manager, Southeast Texas Industries, Flex Land Rig Project, Nederland,
TX
• NDT Project Manager & Turnaround Project Mgr. at Chevron Refinery, Beaumont, TX
• NDT Project Manager, Inspector & Turnaround Manager at BP Refinery, Beaumont, TX
• NDT Project Manager, Inspector & Turnaround Mgr. at Motiva Refinery Beaumont, TX
• NDT Project Manager, Inspector & Turnaround Mgr. at Invista Refinery Beaumont, TX
• NDT Project Manager, Inspector & Turnaround Manager, Shell Refinery Beaumont, TX
• NDT Project Manager, Inspector, Golden Pass LNG project, CB&I/Shell, Golden pass,
TX
• NDT Project Manager and Inspector, Signal International for Northrop Grumman
US Navy LPD San Antonio class amphibious transport Module construction project for the
USS New York (LPD-21), Orange, TX
• NDT Project Manager and Inspector, Signal International for Northrop Grumman
US Navy LPD San Antonio class amphibious transport Module construction project for the
USS San Diego (LPD-22), Orange, TX
• NDT Project Manager, Inspector Big Hill US Strategic Petroleum Reserve, Beaumont,
TX
Facilities:
These jobs were performed at multiple facilities and industries such as LNG Facilities,
Petrochemical Refineries, FAA repair stations, Pulp & paper Facilities, Utility, Nuclear,
LNGTerminals and Storage Facilities, Oil & gas, Aerospace, Aviation, Marine, Construction
projects, Fabrication Facilities and Government Facilities, including Shutdown
Turnaround & Maintenance projects in the US and Internationality.
• Inspection projects working directly with and supervising CWI inspectors for Welding
Procedure Qualifications and Certifying and Qualifying Welders for multiple methods
• Performance of other basic tests such as Hardness Testing
• Positive Material Identification (PMI), Dimension Inspection, Chemical Analysis, Bend
and Charpy Tests, Micro / Macro Graph inspection, and Metallurgical Testing.
• Inspection Projects working directly with and supervising API 510, 570, 653 and CWI
Inspectors on projects performing inspection, as Metco's Shutdown and project Manager,
• Performed inspection as Third Party Surveillance and Vendor Surveillance
Inspected Items:
• Inspection of Piping, Pressure Vessels, Heat Exchangers, Tanks, & Piping
• Performed NDT to ANSI, ASME, AWS, API, ABS, US Coast Guard, US Navy
• Code based Inspection on Statically and Cyclically loaded structural members
• Subsea Equipment, pipelines, Drill pipe, Drill Casings, for multiple clients
• Classification Surveys on Marine Vessels, cranes Land rigs, Offshore Drilling rigs,
Semi-Submersible, Jack-Up rigs and Production platforms
....................................................................................................................
NACHER Corporation
QA/QC/NDT Specialist, Corporate NDT Level III, ASNT SNT-TC-1A NDT Level II
UTSW,MT,PT,VT, Project and Office Manager
May 2001 - December 2002 (1 year 8 months)
Positions and Certifications:
QA/QC/NDT Specialist, Corporate NDT Level III, ASNT SNT-TC-1A NDT Level II
UTSW,MT,PT,VT,
I was hired to help startup the Inspection Division for the company
This entailed building the inspection division from the ground up.
In the initial stages had to generate initial the Quality Management System, as well as
all the other procedures we would need.
Duties:
• NDT Inspector, Project Manager, Office Manager
• Document Review, Field Supervisor, Procedure Writing, and Review.
• Source Inspector, Vendor Auditor, Receiving inspector for various clients
Projects:
• This included Start-up of all other NDT branch offices in the division in multiple states,
for Stateside and International inspection projects. These duties encompassed, Project estimation, Assurance of compliance with Industry, State, Federal, and International
Regulations and requirements.
• Including all major project and job costing. Advisement to clients on General and
Advanced NDT methods. Training and Qualification of NDT all Level II UT, MT, PT, VT
Inspectors for the company.
........................................................................
METCO - Materials Evaluation Technology Corporation
ASNT SNT-TC-1A NDT Level II UT/SW, VT, MT, PT, NDT Project Manager
January 2000 - May 2001 (1 year 5 months)
Positions and Certifications:
NDT Inspector, Trainer, Project Manager, NDT Manager & NDT Site Supervisor
ASNT SNT-TC-1A Level II UT/SW, AUT, TOFD, PT, MT, VT
Duties and Projects:
• NDT Manager for the “Amethyst 1 and 2 Oil Rigs" New Vessel Construction Projects.
• Performed various forms of NDT on Marine vessels, Pipe, Pressure Vessels, and
Storage Tanks, as well as Static and Cyclically, loaded structural members, such as
beams and cranes, for the Marine & Petrochemical industries for multiple shipyards and
marine construction
• Specializing in UT Shearwave flaw detection and sizing. Performing AUT and TOFD on
Carbon Steel Duplex and Stainless Austenitic alloy and Materials. Including LNG Storage
tanks, Piping, and Pressure vessels.
• In-service and on-stream inspection, NDT Manager and Inspection on many various
Turnarounds, Pipelines, Shutdowns & In-Service Downstream Inspection projects.
• Operating Automated and Semi-automated Scanning Equipment such as AMDATA,
RTD,
OLYMPUS /PANAMETRICS and KRAUTKRAMER, Equipment, Scanners, and Instruments.
...................................................................................
LONGVIEW Inspection / ACUREN Inspection
ASNT SNT-TC-1A NDT Level II Inspector, UT, MT, PT, RT, RT/FI, VT, AUT
July 1998 - January 2000 (1 year 7 months)
Positions and Certifications:
NDT Inspector, Trainer, Project Manager, NDT Manager & NDT Site Supervisor
ASNT SNT-TC-1A Level II UT/SW, AUT, TOFD, PT, MT, VT UT Shearwave Inspection
specialist
Duties:
• NDT Inspector, NDT Trainer, Assistant NDT Project Manager, NDT Manager
• NDT Manager for the “Amethyst 1 and 2 Oil Rigs" New Vessel Construction Projects.• Performed various forms of NDT on Marine vessels, Pipe, Pressure Vessels, and
Storage Tanks as well as, Static and Cyclically loaded structural members Including as
beams and cranes for the Petrochemical, Utility, Oil & gas, Marine & Pulp & paper
industries for Multiple clients on Construction, Fabrication, On-stream, Turnarounds
Shutdowns & Maintenance projects.
• Performed the required NDT and examinations for API 510, 570 & 653 Inspection
projects working directly with a certified CWI & API 510, 570 & 653 Inspectors
• Worked with Longview’s ”Advanced Technology Team” assisting and performing AUT
and TOFD on Carbon Steel and Stainless Austenitic alloy Tanks, Piping, and Pressure
vessels in service and on-stream pipelines and units, Turnarounds Shutdowns &
Maintenance inspection projects.
• Operated Automated and Semi Automated AUT Scanning Equipment such as AMDATA,
RTD, PANAMETRICS and KRAUTKRAMER Equipment scanners encoders and Instruments.
......................................................................
NASA / Code Services Inc.
NAS-410 & ASNT SNT-TC-1A NDT Level II UT,VT,MT,PT,RT,RT NDT Level II & RT Film
Interpretation
July 1996 - July 1998 (2 years 1 month)
Positions and Certifications:
NAS-410 & ASNT SNT-TC-1A NDT Level II UT,VT,MT,PT,RT,RT Inspector & RSO
Contracted to NASA through CODE Services performing UT, MT, PT, RT, & VT
Duties:
• NDT Inspector, Project Supervisor, CODE Services RSO (Radiation Safety Officer)
• Performed multiple methods of NDT inspection for various Propulsion and liquid fuel,
solid fuel, and hybrid liquid-solid fuel, engine test and research projects, conducted at
the live fire engine test stands, and other research development and testing facilities for
NASA's Advanced Propulsion Research Group.
• Project Supervisor performing day-to-day Inspection as well as the supervision of all
NDT performed by inspection personnel at the test stands.
• Responsible for training and mentoring all Junior NDT Inspectors
• Performed NDT on Launch Vehicle Airframes, Engines, and related structures
• QA/QC • Document review, Material Traceability, Materials Receiving Inspection,
Source Inspection, Vendor surveillance, 3rd party Witness of NDT performed at the test
stands.
• NDT on Airframes, Engine test support structures and related structures including Pipe,
Pressure Vessels, Storage Tanks and spheres as well as Static and Cyclically loaded
structural members, such as beams, and cranes.
• Performed additional NDT projects for CODE Services from time to time for the
Petrochemical, Utility, Oil & gas industriesProjects:
• NDT Project and site supervisor for all inspection projects for Code at NASA in
Huntsville, AL
• NDT Project and site supervisor for all inspection projects for Code at NASA in
Waveland, MS
NASA and Aerospace related Projects:
• Advanced Propulsion Group “XRS-2200 Linear Aerospike Engine:” test program.
• SSME - Space Shuttle Main Engine modifications and engine tests.
• Tomahawk Cruise Missile Modification Project at WYLE Laboratory, in Huntsville, AL
• Hellfire Missile Modification project for Code at WYLE Laboratory, in Huntsville, AL
Additional Projects:
• Code Service projects for Oak Ridge National Laboratory, Oak ridge, TN
• On-stream, Turnarounds, Shut Downs & Maintenance projects at Chevron Phillips
Refinery, Decatur, AL
NASA Facilities:
Stationed at the live fire engine test stands at the following NASA facilities;
• NASA Marshall Space Flight Center, Redstone Arsenal - Huntsville, AL
• NASA John C. Stennis Space Flight Center - Waveland, MS
Including projects at other NASA and US Government facilities such as;
• NASA Johnson Space Flight Center - Houston, TX
• NASA Kennedy Space Flight Center - Merritt Island, FL (Cape Kennedy)
Additional Facilities:
• Oak Ridge National Laboratory - Oak Ridge, TN
• Chevron Phillips Refinery - Decatur, AL
.................................................................................
MQS Inspection Inspection services
ASNT SNT-TC-1A NDT Level II UT, MT, PT, RT Inspector, Manual and Autocad Drafter
June 1995 - June 1996 (1 year 1 month)
Positions and Certifications:
ASNT SNT-TC-1A NDT Level II UT, MT, PT, RT Inspector
Manual and Autocad Drafter
Duties:
• Calibrated non-destructive testing equipment
• Conducted thickness testing of pipelines with UT technique to inspect for corrosion
• Performed Inspection on Industrial equipment Pipes pressure Vessels and Storage
Tanks to determine the structural integrity and corrosion rates.
• Helped coordinating projects through to supervision of small teams of inspectors and
laborers• Manually drafted Isometric and Orthographic drawings of Inspected Pipes pressure
Vessels and Storage Tanks including Inspection locations and results
Projects:
• Worked on TVA (Tennessee Valley Authority) Shutdowns and Scheduled Repair
Outages at Various TVA Nuclear, Coal-fired, Fuel Oil Fired, and Hydroelectric Power
Plants.
• Preformed NDT on Piping Pressure Vessels, Storage Tanks, and Forgings for the
Petrochemical, Utility, Oil & gas, Marine & Pulp & paper industries for Multiple clients on
Construction, Fabrication, On-stream, Turnaround & Maintenance projects
Inspected Items:
• Preformed NDT on Piping Pressure Vessels, Storage Tanks, and Forgings for the
Petrochemical, Utility, Oil & gas, Marine & Pulp & paper industries for Multiple clients on
Construction, Fabrication, On-stream, Turnaround & Maintenance projects.
.................................................
SITI Scientific Inspection and Testing Inc.
ASNT SNT-TC-1A NDT Level II RT, UT, MT, PT, Inspector, Manual and Autocad Drafter
January 1993 - June 1995 (2 years 6 months)
Positions and Certifications:
ASNT SNT-TC-1A NDT Level I & II UT, MT, PT, RT Inspector & Autocad Drafter
Duties:
• Calibrated non-destructive testing equipment
• Conducted thickness testing of pipelines with UT technique to inspect for corrosion
• Performed Inspection on Industrial equipment Pipes pressure Vessels and Storage
Tanks to determine the structural integrity and corrosion rates.
• Helped coordinating projects through to supervision of small teams of inspectors and
laborers
• Manually drafted Isometric and Orthographic drawings of Inspected Pipes pressure
Vessels and Storage Tanks including Inspection locations and results
Projects:
• Worked on TVA (Tennessee Valley Authority) Shutdowns and Scheduled Repair
Outages at Various TVA Nuclear, Coal-fired, Fuel Oil Fired, and Hydroelectric Power
Plants.
Inspected Items:
• Preformed NDT on Piping Pressure Vessels, Storage Tanks, and Forgings for the
Petrochemical, Utility, Oil & gas, Marine & Pulp & paper industries for Multiple clients onConstruction, Fabrication, On-stream, Turnaround & Maintenance projects.
.........................................................................
AT&T
QA/QC/NDT VT and Electrical Inspector Expert SMT & PCB Diagnosis & Repair Technician
January 1990 - December 1992 (3 years)
Positions and Certifications:
QA/QC/NDT VT and Electrical Inspector Expert SMT & PCB Diagnosis & Repair Technician
Duties:
• Worked in AT&T's Non-Destructive Testing lab as an NDT Visual and Electrical
Inspector & Performed VT & Electrical inspection as well as Electrical Testing, Testbed
Diagnosis, and Repair on various AT&T products containing, SMT (Surface Mounted
Technology) and PCB (Printed circuit boards)
.............................................
McDonnell Douglas Aircraft Corporation (Now Boeing)
Inspection Engineer Intern QA/QC Non-Destructive Inspection (NDI) Assistant
January 1989 - January 1990 (1 year 1 month)
Positions and Certifications:
Applied to and was selected from a group tested of applicants for the Aerospace
Engineering Inspection Internship program as a Quality Assurance, Quality Control
Non-Destructive Testing Assistant.
Assigned to McDonnell Douglas F-15E Strike Eagle modification program for the USAF
Under the direct supervision & intense training of a team of Aeronautical engineers
Duties:
• Maintained equipment and materials with strict adherence to applicable US Air Force
reference standards and procedures.
• Performed and documented, daily quality control checks and calibrations on inspection
instruments products and parts.
• Evaluated the integrity of aviation structure and avionics components to ensure
specified performance in use and operation.
• Presented clear, organized data in graphs, charts, tables and written reports.
• Communicated prepared reports data and presented inspection results with various
engineers and departments, ensuring work was completed exactly to the specified Air
Force requirements.
• Set up and exposed X-Rays for a wide variety of aerospace parts.
• Performed fluorescent penetrant and ultrasonic disciplines to detect defects in jet
engine components, airframe structures, components and parts.• Maintained operation and upkeep of clean line: temperatures, mixtures and proper
disposal of hazardous materials, including cleanup of hazardous spills
SKILLS & EXPERTISE
Summary of Inspection Methods & Techniques of which I am capable of performing:
• UTSW - Ultrasonic Testing Shear Wave, Techniques: Weld Quality, Forgings,
Volumetric, Flaw Sizing, Crack propagation
• ALW/UT - Angled and High Angle Longitudinal Wave Ultrasonic Testing
• AUT - Automated and Semi-Automated Ultrasonic Testing (AUT Operator &
Interpreter)
• TOFD - Time of Flight Diffraction
• PAUT - Phased Array Ultrasonic Testing
• MT - Magnetic Particle Testing / Techniques: Wet/Dry Visible, Fluorescent / Methods:
Bench, Coil, Yoke
• PT - Penetrant Testing / Techniques: Visible, Fluorescent,
Methods: Solvent removable, Water washable, Post-Emulsification
• VT - Visual Testing / Techniques: Remote, Direct, VT-1,VT-2, & VT-3
.(1)Surface, (2) Leak Test, and (3) Pressure Vessels
Methods: Direct, Remote (Borescope, Optical microscopy, Video inspection)
• RT - Radiographic Testing and Film Interpretation / Techniques: Manual, Automatic
and Digital Processing
Methods: Iridium, & Cobalt, Cameras, X-Ray Tubes
• DRT - Digital Radiography and Digital Processing Utilizing “FlashX & RayzorX Pro”
digital radiography systems & Xbit Pro software
• MI - Mechanical Inspection, CCM Systems, Manual, Linear Calipers and Micrometers
• EI - Electrical Inspection, Surface, Subsea, and Submersible (ROV's) Umbilical
Connections, Advanced and Basic Circuit board diagnosis & repair, PCB - Printed Circuit
Boards, SMT - Surface Mounted Technology, Inspection
• RI - Receiving Inspection, Material Segregation, Commercial Dedication of Nuclear
Safety Related Items
• PMI / XRF- Positive Material Identification, Utilizing DELTA XRF, XMET 3000TX Alloy
Analyzers
• HT - Hardness testing, Weld and Case hardness in multiple scales Utilizing Equitip,
Teller-Brinell and other equipment
• HT & PWHT - Heat Treatment and stress relief, experienced with Localized pre and Post
weld, including "Full Furnace" practices
• FT - Ferrite Testing, Utilizing various carbon content and Ferrite testers
Material Inspection Experience:
Experienced with inspection of multiple types of materials, and related inspection codes
such as:
• Duplex and Super-Duplex Materials, Alloy 2205, Alloy 2507 and UNS 32760, etc.
• Carbon Steels and multiple Carbon steel alloys,• Stainless Steel alloys and materials, 304, 316, Alloy 20, etc.
• Austenitic alloys such as Austenitic Stainless steels, etc.
• Nickel steel alloys, Ni-chrome, Copper-Nickel, etc.
• Exotic materials and alloys like Inconel 625, Inconel 718 & Nitronic 60, Hastelloy, etc
• Elemental steels and alloys, such as Titanium, Beta C, 6al-4v, Beryllium, Beryllium
copper, etc.
• Aluminum and High strength Aluminum alloys, Duralumin, etc.
• Carbon Fiber and Composite materials. Such as bonded Honeycomb structures, Carbon
fiber,
Composite Resin, Structures, Pressure Vessels and Piping
Inspected Items:
• Experienced at the Inspection of Welds, Weldments, Structural Weldments, Structural
steel
members, Plate, Sheet Metal, Pumps, Valves, Piping, Storage tanks, Pressure vessels
and
Reactor components utilizing manual and automated scanners and inspection equipment
• As well as structural members and components for Reactor Polar cranes & Nuclear Fuel
Handling, Fuel Transfer machines, and equipment. As well as other Nuclear-Related
equipment components and containment structures
• LNG related piping, pressure vessels & storage tanks, ILI In-line inspection of pipelines
• As well as many Aerospace and Aviation Powerplant & Airframe related structures &
components Document Review and Procedure Writing and Review Experience:
• Experienced with Document review per NQA-1 and NRC Standards & Regulations This
Included the Development Writing, Review, Editing and Approval of Inspection and
quality Procedures and QMSs (Quality management Systems) for NDT/NDE, QA/QC,
Operation, Safety, Inspection Manufacturing and Welding.
• Document review, for compliance to Client Customer based on Interpretation of
blueprints and schematics
• NRC, DOE and NQA-1 regulations codes, specifications and standards.
• Experienced with the control and release material and determination of Accept / Reject
• Experienced verification & traceability of material & components quality, acceptance
and fitness for service. per. various client and manufacturers prints specs, codes &
standards.
Welding Technique, Inspection Experience:
Experienced inspection of multiple basic and advanced welding techniques such as;
• FSW - (Friction Stir Welding) Inspected items: High strength aluminum alloys.
• MIG - (Metal inert gas welding) Inspected items: Multiple industries and items
• SMAW - (Shielded metal arc welding), Inspected items: Multiple industries and items
• FCAW - (Flux cored arc welding) Inspected items: Multiple industries and items
• STAW - (Stud arc welding) Inspected items: Studs welded to base material
• GMAW - (Gas metal arc welding) Inspected items: Multiple industries and items• GTAW / TIG - (Gas tungsten / Tungsten inert gas arc welding) Inspected items Multiple
industries and items
• SAW (Submerged arc welding) Inspected items: Multiple industries and items
• ERW (Electric resistance welding) Inspected items: Square & rectangular structural
tubes As well as many others
NDT Engineering Related skills:
• Experienced & qualified AUT Operator/Inspector/Interpreter On AUT systems for
Shearwave, TOFD, Straight Beam, Angled Longitudinal Wave and Phased Array Systems
• Experienced with interpretation of Blueprints, Schematics, P&ID’S,
• Experienced with Laser scanners and measuring equipment
• Experienced with the utilization of Eddy Current inspection equipment and practices
QA/QC & NDT Specific Computer Skills:
Experienced with operation & monitoring many types of NDT Operation & Asset
management systems related software, such as:
• Experienced with AutoCAD as well as Manual drafting and Automated drafting
• AUT and PAUT Operation and data and acquisition, Interpretation and analysis
software
such as Tomoview, MIcroplus, Microplus2, PA Wizard, Eclipse Scientific Beam tool, etc.
• Inspection Management and Survey software such as Ultrapipe, Inspection Manager
Pro. etc.
• Multiple Non-Conformance reports and Corrective action report software and systems
Inspection Equipment Used:
Utilized standard and advanced NDT Equipment and Techniques including:
• UT Shearwave flaw detectors, Corrosion Mapping & C-Scan equipment
• Automated UT, TOFD, Phased Array and UT Shearwave, equipment and scanners
• PMI - (Hand-held XRF Analyzers) Niton XL2, S1 Titan, Arc-Met XMET5000
• Optical Comparators - Starrett HF600 and HF750 Optical Comparators
• Digital X-Ray equipment such as “FlashX & RayzorX Pro” digital radiography systems
• ROMER CMM Equipment such as ROMER INFINITE 2.0 Series Measuring Arm
• FARO CMM Equipment such as FARO ScanArm, Laser Tracker, Cobalt Array Imager,
Laser Projector and the FARO Gage
Ultrasonic and Eddy Current Inspection Instruments Used:
Very experienced with the setup and calibration of Manual and Automated NDT
Instruments and software systems from a variety of manufacturers such as:
• KRAUTKRAMER Instruments, USN-52, USN-58
• GENERAL ELECTRIC Instruments and Scanners, GE-GO
• PANAMETRICS Instruments and Scanners, 36-DL, 38-DL, B-scan Mouse
• OLYMPUS NDT Instruments and Scanners• Omniscan, Epoch, B and C-Scan Pipe Scanners, Corrosion Scanners, and Tank
Crawlers
• AMDATA, Instruments, Equipment and Scanners
• APPLUS RTD Equipment and Scanners,
• CB&I Scanners and Equipment
• TECHSONIC, SONATEST, NEWCOR & KRAUTKRAMER Instruments
• Operational experience setting up and utilizing ALW, AUT, PAUT scanners, crawlers and
systems for inspection of Pressure vessels, Piping and Pipelines for weld & wall quality
• Experience with Olympus TOMOVIEW and AMDATA software
• Familiar with of Uniwest / Nortec Eddy Current machines
• Familiar with Guided Wave techniques and equipment
Computer and Software Skills:
High level of proficiency with multiple types of basic and advanced types of software and
systems;
• Solidworks
• Solid Edge
• AutoCAD Mechanical
• AutoCAD Inventor
• MS Office applications - Strong Excel, Word & Powerpoint skills
• Database Software - Oracle, Access, etc.
• Data Entry Terminal - PDT, Mainframe Terminal etc.
• Desktop Publishing Software - InDesign etc.
• Drafting Software - AutoCAD, Auto-Sketch etc.
• Networking or LAN Software - Cisco, etc.
• Web Design Software - Rapid Weaver, etc.
.................................................................................................
Personal Attributes and Skills:
• Good attention to detail, Problem Solver, Adaptable to changing requirements & needs
• Equally comfortable in high-pressure work environments in the field, plant or the office
• Ability to apply multi-system level thinking
• Exceptional attention to safety and quality
• Excellent written and verbal communication skills
• Ability to earn respect and trust of coworkers, clients, and representatives through due
diligence, commitment and accomplishments of goals and assigned duties
Personal Abilities:
• Excellent communication and interpersonal skills with the ability to effectively interface
with various cultures and nationalities at all levels of an organization.
• Very experienced at the direction of inspection personnel
• Years of experience Training & Mentoring multiple NDT / QA / QC Technicians and
assistants.• Personally trained hundreds of NDT / QA / QC Technicians and assistants in multiple
disciplines
• Years of experience in arbitration and mediation of discussions and differing points of
view between company clients, vendors, customers, departments, engineers and
contracting companies in order to settle issues in a manner in which parties come to a
mutually beneficial understanding and agreement upon issues.
• Unique ability, to get along well with a variety of personalities and individuals while
effectively building relationships between Clients and Co-Workers
.................................................................................................
Extensive experience in Interpretation of multiple Procedures & Codes:
• NRC and IAEA International Nuclear-Related, Codes and Regulations such as:
NQA-1, NOG-1, 10CFR50, 10CFR21 Inspection standards
•API codes & Standards such as:
API-1104,API-5L,API-6A,API-510,API-570,API-653,API-650, RP2X etc.
• ASTM Codes: ASTM A388, ASTM A275, ASTM A372 ASTM A572 etc.
• American Welding Society (AWS) codes:
AWS B2.1 Spec. for Welding Procedure and Performance Qualification
AWS D1.1 Structural Welding Code, Steel
AWS D1.2/D11.2M:2008 Structural Welding Code - Aluminum
AWS D1.6 Structural Welding Code, Stainless Steel
AWS D17.1 Specifications for Fusion Welding for Aerospace Applications
• American Society of Mechanical Engineers (ASME) codes:
ASME BPVC Section I Rules for Construction of Power Boilers
ASME BPVC Section II Material Specifications
ASME BPVC Section II Nondestructive Examination
ASME BPVC Section VIII Rules for Construction of Pressure Vessels
ASME BPVC Section X Fibreglass-Reinforced Plastic Pressure Vessels
ASME BPVC Section IX Specification for Welding Procedure Qualification
ASME Sec. XI Inservice Inspection of Nuclear Power Plant Components
ASME B31.1 Power Piping
ASME B31.2 Fuel Gas Piping
ASME B31.3 Process Piping
ASME B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids
ASME B31.5 Refrigeration Piping and Heat Transfer Components
• US Military, DOD, NAVSEA, ABS, DNV, NASA codes such as:
ABS American Bureau of Shipping, Rules for Materials and Welding
DNV Rules for Submarine Pipeline SystemsDNV Rules for Mobile Offshore Drilling Units
DNV Rules for Marine Operations
NAVSEA 250-1500-1 Welding Standard, Naval Nuclear Reactor Welding
NAVSEA T9074-AS-GIB-010/271 - Requirements for NDT Methods
NAVSEA S9074-AQ-GIB-010/248, Requirements for Welding and Brazing
NAVSEA S9074-AR-GIB-010/278, Requirements for Fabrication Welding and Inspection
for Machinery, Piping and Pressure Vessels
NAVSEA T9074-AD-010-1688 Welding & Inspection Submarine Structures
NAVSEA S9086-CH-STM-010 - NSTM Ch. 74 Volume 1, Welding
NAVSEA 0900-LP-001-7000 Fabrication & Inspection of Brazed Piping
MIL-STD-25 B Structural symbols for Naval ship drawings
MIL-STD-1689A Fabrication Welding & Inspection of Ships Structure
MIL-STD-2154 Inspection, Ultrasonic testing of Metals for the DOD
MIL-STD-2035A, Dept. of Defence NDT Acceptance Criteria
MIL-STD-2219A Fusion Welding for aerospace applications
TARDEC Welding Code for Ground Combat Vehicles & Support Equipment
• NASA and Aerospace codes:
NASA/JSC PRC-0001 Process Spec. for Manual Arc Welding of Aluminum as well as many
other NASA Codes
AMS-STD-2154 Inspection, Ultrasonic, Process For Aerospace Structures
• ISO Standards & Specifications:
ISO 9001: 2008 & 2015 Quality Management Systems
ISO 9712:2012 - Qualification and certification of Non-destructive testing personnel.
ISO 3834 Welding Fabricator Certification
ISO 5580, Non-destructive testing -- Industrial radiographic illuminators -- Minimum
requirements.
ISO 9934-1 & 3, Non-destructive testing -- Magnetic particle testing -- Part 1: General
principles. & Part 3: Equipment.
ISO 9935, Non-destructive testing -- Penetrant flaw detectors -- General technical
requirements.
ISO 10375, Non-destructive testing -- Ultrasonic inspection - - Characterization of
search unit and sound field.
ISO 11537, Non-destructive testing -- Thermal neutron radiographic testing -- General
principles and basic rules.
ISO 12710, Non-destructive testing -- Ultrasonic inspection --Evaluating electronic
characteristics of ultrasonic test instruments.
ISO 12713 & 12714, Non-destructive testing -- Acoustic emission inspection -- Primary
and Secondary calibration of transducers.
ISO 4986, Steel castings -- Magnetic particle inspection.
ISO 4987, Steel castings -- Penetrant inspection.
ISO 4993, Steel castings -- Radiographic inspection.ISO 5579, Non-destructive testing -- Radiographic examination of metallic materials by
X-Rays & gamma rays.
Comments
As you will see upon review of my resume, I have many years of experience in a variety of inspection disciplines techniques
and methods in multiple inspection industries and fields.
In addition to my extensive technical experience, my broad background includes many years of office and project
management and personnel administration. Including years of experience in training, mentoring, testing, and managing
hundreds of inspectors and inspection personnel.
I would appreciate any additional information about this, or any other potential position in which my skills and expertise may
be of service.
I would also welcome the opportunity to discuss how my experience and skills can benefit your company and answer any
further questions that you might have. Please feel free to contact me to schedule a meeting or interview at your convenience.
Below you will find a brief description of my skills, experience, and certifications for your immediate reference.
Thank you for your time and consideration.
Regards,
Scott Turner Sr.
.....................................
Brief description of my more than 25 Years of experience in the QA/QC-NDT Inspection Industry
Current or previous Qualifications and Certifications Obtained:
NAS-410 / ASNT SNT-TC-1A Level II UT & AUT (Ultrasonic Examination and Testing)
Techniques & Methods: Shear wave, Longitudinal wave, Angled Longitudinal Wave, Phased Array, TOFD / Automatic and semi-automatic
AUT scanners & equipment. Including Volumetric, Weld Quality, Flaw Detection, Flaw Sizing, Thickness, Crack Propagation Techniques
Experience with Guided wave & Immersion methods.
NAS-410 / ASNT SNT-TC-1A Level II VT (Visual Examination and Testing)
Techniques & Methods: Direct, Remote, Manual & Automated Video Borescopes.
NAS-410 / ASNT SNT-TC-1A Level II MT (Magnetic Particle Examination and Testing)
Techniques & Methods: Bench, Yoke, and Coil / Visible & Fluorescent techniques
NAS-410 / ASNT SNT-TC-1A Level II RT (Radiographic Examination and Testing)
Techniques & Methods: Iridium, Cobalt and X-Ray Tube, Manual and Digital film processing interpretation
NAS-410 / ASNT SNT-TC-1A Level II PT (Liquid Penetrant Examination and Testing)
Techniques & Methods: Solvent Removable, Water Washable, Post emulsifiable / Visible & Fluorescent
ANSI N45.2 Level II Mechanical / Electrical / Visual Inspector
Techniques and Methods: Receiving, In-Process, Assembly & Final Component Verification
NQA-1 / NRC 10 CFR Part 50 Appendix B, Compliant
Nuclear Material, Component & Document Review and vendor surveillance Inspector
Industries and facilities that I have worked in:
Petrochemical, Nuclear, Aerospace, Aviation & Marine industries, Refineries, Power Plants, Fabrication facilities, Aerospace research
facilities, Offshore Production platforms, Onshore Drilling rigs, Offshore Drilling platforms, Marine Vessels (for New Construction, Repair,
Classification & In-service Surveys)
Experienced in Codes and standards such as:
ASME BPV Section I, II, III, V, VIII, IX, XI etc.
NAVSEA (Multiple Specifications)
ABS Rules and Regulations Etc.
many others such as DNV, NRC, DOE, regulations etc.
Various job functions, duties, and positions I have served in:
NDT Level II Inspector (Multiple Methods)
Corporate NDT Level III
NDT Personnel Trainer / Testing Evaluator
NDT Project, Office & Division Manager
NDT Manager
QA/QC Manager