API CWI Inspector
NDT.org Member Since: 2017
Added: 7/6/2017
Last Updated: 7/6/2017
Last Updated: 7/6/2017
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
TX Texas
Country:
United States
Status:
I am willing to Travel.
I need a job as soon as possible.
I am willing to work overseas.
I need a job as soon as possible.
I am willing to work overseas.
Certifications
Certifications
API 510 #26102
API 570 #30485
API 653 #35101
AWS CWI #98040891
White belt Six Sigma
OQ DOT Certification
RT Film Interpretation Previously Level II UTT an PT
API 510 #26102
API 570 #30485
API 653 #35101
AWS CWI #98040891
White belt Six Sigma
OQ DOT Certification
RT Film Interpretation Previously Level II UTT an PT
Education
Graduated with 3.0 GPA in Welding Technologies from Pipe fitting trade school Local Union 195 Nederland,Texas.
Experience
Professional Experience
Inspection Manager February 2017- March 2017 Pinnacle ART Pasadena, Texas 77504 Navajo Refinery Artesia New, Mexico
Achieved on time start-up of multiple assigned units while controlling cost and quality.
Improved inspection efficiency through dialog and communication with contractors.
Provide leadership and point of contact for all quality and safety concerns.
Support contractors and inspectors on compliance, permitting and documentation of work.
Administrate office programs and track inspections status using Primavera (P6) and create excel spreadsheets as well as wall charts and provide updates to management.
Lead daily safety and quality meetings to address current conditions.
Conduct field Audits of Inspectors and technicians to improve quality through mentoring.
Monitor and document the calibration of inspection equipment for non-destructive testing.
Review final reports to assure meeting the client’s contractual needs.
Close out packages and review final documentation with plant Inspection team.
Performance review of all inspectors documented for management and future projects.
Inspection Manager August 2016 – October 2016
Weld Spec Inspection Lumberton, Texas 77657 Valero Refinery Port Arthur, Texas
Achieved on time start-up of multiple assigned units while controlling cost and quality.
Improved inspection efficiency through dialog and communication with contractors.
Provide leadership and point of contact for all quality and safety concerns.
Support contractors and inspectors on compliance, permitting and documentation of work.
Audit shop surveillance of repaired equipment including heat exchanger re-tubes.
Inspected and monitored furnaces while being re-tubed.
Administrate office programs and track inspections status using Primavera (P6) and create excel spreadsheets as well as wall charts to provide updates to management.
Lead daily safety and quality meetings to address current conditions.
Conduct field Audits of Inspectors and technicians to improve quality through mentoring.
Monitor and document the calibration of inspection equipment for non-destructive testing.
Review final reports to assure meeting the client’s contractual needs.
Close out packages and review final documentation with plant Inspection team.
Performance review of all inspectors documented for management and future projects.
.
Chief Inspector April 2016-August 2016
VIP Staffing San Antonio, Texas 78232 GE Oil and Gas Schertz, Texas
Reviewed P&ID and construction drawings and verified skids were manufactured to drawings. Inspected Oil and Gas compression skids to applicable codes and standards.
Created tracking spreadsheet to manage inspections and track all non-conformance.
Coordinated with other inspectors to complete inspections before deadlines and under budget.
Mentored less experienced Inspectors in quality assurance techniques and code compliance.
Documented non-conformances and worked with contractors to correct to code all discrepancies.
Inspection Manager August 2008 – December 2015
Mistras Group Princeton, New Jersey 08550 BP Exploration Prudhoe Bay, Alaska
Supervised inspections of DOT regulated pipelines to appropriate ASME codes as well as state regulations.
Created and generated detailed DOT inspection reports along with client reports using Microsoft programs and client inspection software.
Trained and mentored Inspectors and Technicians to Code and HSE compliance.
Managed planning and scheduling of non-destructive testing crews for assigned area to meet deadlines.
Achieved visual pipe inspections and reported anomalies to client.
Resolved inspection issues using analytical processes.
Volunteered for training in Six Sigma and other client quality programs
Worked with Engineering to capture as builts and document changes.
Executed DOT compliance audits with Alaska State inspectors.
Liaised with client to close out all work and send Alaska State agencies copies as requested.
Conducted annual reviews for all personnel assigned.
Inspection Manager February 2017- March 2017 Pinnacle ART Pasadena, Texas 77504 Navajo Refinery Artesia New, Mexico
Achieved on time start-up of multiple assigned units while controlling cost and quality.
Improved inspection efficiency through dialog and communication with contractors.
Provide leadership and point of contact for all quality and safety concerns.
Support contractors and inspectors on compliance, permitting and documentation of work.
Administrate office programs and track inspections status using Primavera (P6) and create excel spreadsheets as well as wall charts and provide updates to management.
Lead daily safety and quality meetings to address current conditions.
Conduct field Audits of Inspectors and technicians to improve quality through mentoring.
Monitor and document the calibration of inspection equipment for non-destructive testing.
Review final reports to assure meeting the client’s contractual needs.
Close out packages and review final documentation with plant Inspection team.
Performance review of all inspectors documented for management and future projects.
Inspection Manager August 2016 – October 2016
Weld Spec Inspection Lumberton, Texas 77657 Valero Refinery Port Arthur, Texas
Achieved on time start-up of multiple assigned units while controlling cost and quality.
Improved inspection efficiency through dialog and communication with contractors.
Provide leadership and point of contact for all quality and safety concerns.
Support contractors and inspectors on compliance, permitting and documentation of work.
Audit shop surveillance of repaired equipment including heat exchanger re-tubes.
Inspected and monitored furnaces while being re-tubed.
Administrate office programs and track inspections status using Primavera (P6) and create excel spreadsheets as well as wall charts to provide updates to management.
Lead daily safety and quality meetings to address current conditions.
Conduct field Audits of Inspectors and technicians to improve quality through mentoring.
Monitor and document the calibration of inspection equipment for non-destructive testing.
Review final reports to assure meeting the client’s contractual needs.
Close out packages and review final documentation with plant Inspection team.
Performance review of all inspectors documented for management and future projects.
.
Chief Inspector April 2016-August 2016
VIP Staffing San Antonio, Texas 78232 GE Oil and Gas Schertz, Texas
Reviewed P&ID and construction drawings and verified skids were manufactured to drawings. Inspected Oil and Gas compression skids to applicable codes and standards.
Created tracking spreadsheet to manage inspections and track all non-conformance.
Coordinated with other inspectors to complete inspections before deadlines and under budget.
Mentored less experienced Inspectors in quality assurance techniques and code compliance.
Documented non-conformances and worked with contractors to correct to code all discrepancies.
Inspection Manager August 2008 – December 2015
Mistras Group Princeton, New Jersey 08550 BP Exploration Prudhoe Bay, Alaska
Supervised inspections of DOT regulated pipelines to appropriate ASME codes as well as state regulations.
Created and generated detailed DOT inspection reports along with client reports using Microsoft programs and client inspection software.
Trained and mentored Inspectors and Technicians to Code and HSE compliance.
Managed planning and scheduling of non-destructive testing crews for assigned area to meet deadlines.
Achieved visual pipe inspections and reported anomalies to client.
Resolved inspection issues using analytical processes.
Volunteered for training in Six Sigma and other client quality programs
Worked with Engineering to capture as builts and document changes.
Executed DOT compliance audits with Alaska State inspectors.
Liaised with client to close out all work and send Alaska State agencies copies as requested.
Conducted annual reviews for all personnel assigned.
Comments
EXECUTIVE SUMMARY
Accomplished Inspector demonstrating leadership skills and understanding of processes and procedures. Achievements include on time and under budget turnaround projects from planning and scheduling to execution. Possess excellent analytical and problem-solving capabilities as well as verbal communication and interpersonal skills. Ability to multi-task and produce technical reports incorporating historical documentation and mechanical drawings. Working knowledge of fabrication and repair codes ASME, API, AWS, ASNT. Quality Control training using Quality Management Systems (QMS) as well as ISO 9000. A welding background and Certified Welding Inspector. Proficient with Microsoft Office Suite (Word, Excel, and Outlook) and SAP Software. All API 653, 510 and 570 as well as CWI certifications are current. Transportation Worker Identification Credentials (TWIC card), Passport and Driver’s License are current as well.
Accomplished Inspector demonstrating leadership skills and understanding of processes and procedures. Achievements include on time and under budget turnaround projects from planning and scheduling to execution. Possess excellent analytical and problem-solving capabilities as well as verbal communication and interpersonal skills. Ability to multi-task and produce technical reports incorporating historical documentation and mechanical drawings. Working knowledge of fabrication and repair codes ASME, API, AWS, ASNT. Quality Control training using Quality Management Systems (QMS) as well as ISO 9000. A welding background and Certified Welding Inspector. Proficient with Microsoft Office Suite (Word, Excel, and Outlook) and SAP Software. All API 653, 510 and 570 as well as CWI certifications are current. Transportation Worker Identification Credentials (TWIC card), Passport and Driver’s License are current as well.
