NDT Tubular Inspector
NDT.org Member Since: 2018
Added: 7/2/2018
Last Updated: 7/2/2018
Last Updated: 7/2/2018
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
Country:
Pakistan
Status:
I am willing to Travel.
Currently working but always looking.
I am willing to work overseas.
I prefer permanent jobs.
Currently working but always looking.
I am willing to work overseas.
I prefer permanent jobs.
Certifications
NDT Level-II Inspector MT, PT & UT in accordance with ASNT RP SNT-TC-1A.
NDT specialized awareness course in UT, ET and VT from NCNDT.
HSE course in HITRA Team Leader & Permit Receiver from United Energy Pakistan course conduct by URS.
Dies and Mould Short course from Pak Swiss Training Center Karachi.
Auto CAD designing and animation course from Sindh Multimedia College.
MS Office (MS Word, MS Excel, MS Power Point)
Education
B-Tech Hons (Mechanical) From Sindh Institute of Management and Technology 2017.
B-Tech Pass (Mechanical) From Indus University 2012.
DAE (Mechanical) From Pakistani Swedish Institute of Technology -2009.
B-Tech Pass (Mechanical) From Indus University 2012.
DAE (Mechanical) From Pakistani Swedish Institute of Technology -2009.
Experience
Technical/QAQC Specialist Sept 2016 to Continue
Premier Tubular Inspection Services (Oil & Gas)
Key Responsibilities:
QMS Implementation, management reporting and coordination.
Maintain and control all nonconformance reports and take corrective of preventive action.
Implementation of ISO 9001, 18001, 14001 and ISO 17025 for calibration lab.
Document controlling maintain SOPs, FHC, CH and Formats.
Project planning, cost estimation, execution and quality surveying.
Preparing tender submission support in technical proposals and prequalification.
Manage and supervise the operational activities and solving technical issues.
Providing technical support for business development and marketing.
Managing and updating inspection procedures.
Performing OCTG/NDT and QAQC Inspections.
Drill Pipe (EMI) and BHA Inspection.
Calibration of pressure, temperature and torque equipment.
Inventory management.
Sr. NDT Inspector Jul 2016 to Sept 2016
Integrosol Inspection & Testing Solutions
Experience in (Conventional & Advance), In-services inspection of assets inclusive of Vessels, Exchangers, Boilers, Tanks, Piping, and Lifting Equipment.
QA/QC & NDT Inspector Sep 2015 to Jun 2016
Descon Engineering Limited
KMW.
Experience in NDT inspections of Wind Tower Structure, Coal Bunker, Pressure Vessels, Boilers and Heat Exchangers in accordance with ASME standards.
NDT/OCTG Inspector August 2011 to July 2015
Premier Tubular Inspection Services
Four years experience in NDT/OCTG Inspections as below.
Tubular Inspections.
Hoisting & Handling Tools Inspections.
Rig Mast & Sub Structure Inspections.
Drill Pipe (EMI) and BHA Inspections.
Visual, Magnetic Particle, Dye Penetrant and Ultrasonic Inspections.
Lifting Gear Inspections.
Performed above mentioned jobs in accordance with following standards:
DS-1 Volume 3 & 4.
API RP 7G-2.
API 5 CT.
API RP 8B, 7L, 4G, Spec7, 5A5, 5C-1,
ASME / ASTME Standards for NDT.
One year experience performing duties operations & administrative supervision, demonstrated track record of successfully managing, planning small to large projects from start to finish, also have experience in contract dealing with national and international companies in Pakistan, Oman, Kuwait and Iraq.
PWHT Technician/Supervisor Feb 2009 to May 2011
Hussain Power Hot Work
Two year and more experience in Post Weld Heat Treatment Technician/Supervisor and also performing duties as a Machine, Equipment and Product Designer. Officials correspondence with clients such as invoicing and quotations.
I have performs job as Heat Treatment technician/supervisor works on the following Projects in Pakistan.
ENI Bith Sawan Gas Field: Heat treatment of welding joints during shut down.
HUBCO Power Plant: Heat treatment of boiler high pressure tubes material alloy steel P9 welding joints.
Engro Chemical Daharki: Heat treatment welding joints of high schedule 80mm thick pressure lines Dia 24 inch and furnace joints Alloy steel P22, P11 and Carbon steel pipe lines.
KMW Descon Work Shop Port Qasim: Heat treatment welding joints of carbon steel pipe lines.
FFBL: Heat treatment casing of spelt compressor for removing the shaft.
Bayco Oil Pakistan Limited: Heat treatment of Oil vassal carbon steel welding joints and pads plats. Oil farness joints material alloy steel P5.
6-months experience for electrification of the 3-Phase motor controls and panel building, erection & commissioning.
Premier Tubular Inspection Services (Oil & Gas)
Key Responsibilities:
QMS Implementation, management reporting and coordination.
Maintain and control all nonconformance reports and take corrective of preventive action.
Implementation of ISO 9001, 18001, 14001 and ISO 17025 for calibration lab.
Document controlling maintain SOPs, FHC, CH and Formats.
Project planning, cost estimation, execution and quality surveying.
Preparing tender submission support in technical proposals and prequalification.
Manage and supervise the operational activities and solving technical issues.
Providing technical support for business development and marketing.
Managing and updating inspection procedures.
Performing OCTG/NDT and QAQC Inspections.
Drill Pipe (EMI) and BHA Inspection.
Calibration of pressure, temperature and torque equipment.
Inventory management.
Sr. NDT Inspector Jul 2016 to Sept 2016
Integrosol Inspection & Testing Solutions
Experience in (Conventional & Advance), In-services inspection of assets inclusive of Vessels, Exchangers, Boilers, Tanks, Piping, and Lifting Equipment.
QA/QC & NDT Inspector Sep 2015 to Jun 2016
Descon Engineering Limited
KMW.
Experience in NDT inspections of Wind Tower Structure, Coal Bunker, Pressure Vessels, Boilers and Heat Exchangers in accordance with ASME standards.
NDT/OCTG Inspector August 2011 to July 2015
Premier Tubular Inspection Services
Four years experience in NDT/OCTG Inspections as below.
Tubular Inspections.
Hoisting & Handling Tools Inspections.
Rig Mast & Sub Structure Inspections.
Drill Pipe (EMI) and BHA Inspections.
Visual, Magnetic Particle, Dye Penetrant and Ultrasonic Inspections.
Lifting Gear Inspections.
Performed above mentioned jobs in accordance with following standards:
DS-1 Volume 3 & 4.
API RP 7G-2.
API 5 CT.
API RP 8B, 7L, 4G, Spec7, 5A5, 5C-1,
ASME / ASTME Standards for NDT.
One year experience performing duties operations & administrative supervision, demonstrated track record of successfully managing, planning small to large projects from start to finish, also have experience in contract dealing with national and international companies in Pakistan, Oman, Kuwait and Iraq.
PWHT Technician/Supervisor Feb 2009 to May 2011
Hussain Power Hot Work
Two year and more experience in Post Weld Heat Treatment Technician/Supervisor and also performing duties as a Machine, Equipment and Product Designer. Officials correspondence with clients such as invoicing and quotations.
I have performs job as Heat Treatment technician/supervisor works on the following Projects in Pakistan.
ENI Bith Sawan Gas Field: Heat treatment of welding joints during shut down.
HUBCO Power Plant: Heat treatment of boiler high pressure tubes material alloy steel P9 welding joints.
Engro Chemical Daharki: Heat treatment welding joints of high schedule 80mm thick pressure lines Dia 24 inch and furnace joints Alloy steel P22, P11 and Carbon steel pipe lines.
KMW Descon Work Shop Port Qasim: Heat treatment welding joints of carbon steel pipe lines.
FFBL: Heat treatment casing of spelt compressor for removing the shaft.
Bayco Oil Pakistan Limited: Heat treatment of Oil vassal carbon steel welding joints and pads plats. Oil farness joints material alloy steel P5.
6-months experience for electrification of the 3-Phase motor controls and panel building, erection & commissioning.
Comments
Proficient in Tubular Inspection Services having seven years experience in oil and gas industry as Technical/QAQC specialist driving hand on QMS / QHSE Auditing, QAQC coordination with management and reporting, project planning and jobs execution, documents controls, preparation of contracts tender submission and prequalification, quality surveying, NDT inspection (MT,PT & UT) Level II, Implementation of ISO 9001, 18001, 14001,17025 for calibration lab and also calibration of pressure, temperature, torque equipment and inspections of drilling tools, drill pipe (EMI), BHA, rig mast, structure, lifting gears and industrial equipment.
