QUALITY INSPECTOR
Posted: 12/12/2008 3:03:43 PM
This job is closed
NDT.org Job Number:
20985
* Please reference NDT.org Job Number on all correspondence
Fax:
619/440-5209
Company:
Triumph Fabrications San Diego
State:
CA California
Country:
United States
Length:
Full Time Regular
Pay:
DOE
Email:
ladavis@triumphgroup.com
Triumph Fabrications - San Diego has earned a reputation for excellence through more than 50 years of supplying consistent quality products and services to the aerospace commercial and defense markets. Its major area of expertise is producing close tolerance, complex sheet metal assemblies made from all types of aerospace materials using various forming and joining techniques.
If you are experienced in performing the duties and responsibilities listed below, we want to hear from you!
Essential Duties and Responsibilities:
Plan inspection method including setup and mathematical computations required to layout first article parts to verify conformance to tool design and/or blueprint specification.
Inspect supplier furnished raw material and fabricated or processed parts using standard inspection fixtures or gages to assure visual and dimensional compliance with requirements. Verify that required certifications are present and comply with the purchase order-referenced specifications.
Perform in-process and final inspection of parts and assemblies to assure visual and dimensional compliance to specifications, including use of coordinate measuring machines.
Setup and perform fluorescent penetrant inspection of material, parts, and weldments, per written procedures, to verify conformance to applicable blueprints and specifications.
Perform setup and mathematical computations required to inspect, adjust, and calibrate measuring equipment, gages, test equipment and qualifying fixtures.
Maintain receiving inspection certification, penetrant inspection files and records. In addition, maintain gage calibration history files and records on active gages.
Work with production supervisors and operators to document and maintain statistical process control (SPC) data and charts.
Inspects all types of tools and gages, including fixtures, dies, templates using precision measuring equipment.
Document results, maintains and compiles proper records and files.
Performs product, process, and system audits.
If you are experienced in performing the duties and responsibilities listed below, we want to hear from you!
Essential Duties and Responsibilities:
Plan inspection method including setup and mathematical computations required to layout first article parts to verify conformance to tool design and/or blueprint specification.
Inspect supplier furnished raw material and fabricated or processed parts using standard inspection fixtures or gages to assure visual and dimensional compliance with requirements. Verify that required certifications are present and comply with the purchase order-referenced specifications.
Perform in-process and final inspection of parts and assemblies to assure visual and dimensional compliance to specifications, including use of coordinate measuring machines.
Setup and perform fluorescent penetrant inspection of material, parts, and weldments, per written procedures, to verify conformance to applicable blueprints and specifications.
Perform setup and mathematical computations required to inspect, adjust, and calibrate measuring equipment, gages, test equipment and qualifying fixtures.
Maintain receiving inspection certification, penetrant inspection files and records. In addition, maintain gage calibration history files and records on active gages.
Work with production supervisors and operators to document and maintain statistical process control (SPC) data and charts.
Inspects all types of tools and gages, including fixtures, dies, templates using precision measuring equipment.
Document results, maintains and compiles proper records and files.
Performs product, process, and system audits.
Skills:
Qualifications Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
High school diploma or GED
Applicable technical training courses in metrology, basic trigonometry, ANSI Y14.5 geometric dimensioning & tolerancing, inspection techniques, SPC, plus related experience including CMM operation and surface plate layout.
Minimum 2 years experience required.
Must have experience in both NDT and Dimensional Inspection.
Able to read and explain blueprints/specifications, instructions and understand oral and written instructions.
Able to use a variety of machine and measuring tools.
Certified as a Level II Penetrant Inspector, per SNT-TC-1A and NAS-410.
Must be able to communicate and comprehend both written and oral communication in English.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee is regularly required to talk, hear, and use hands to operate measuring equipment or necessary equipment. The employee is frequently required to stand. Occasionally, the employee is required to walk, sit, reach above the shoulders, stoop, kneel, crouch or crawl.
The employee is required to wear safety glasses while performing this position. When performing penetrant duties, the employee is required to wear rubber gloves.
The employee must regularly lift/move up to 50 pounds when loading/unloading material onto machine. Specific vision requirements of this job include close vision, distance vision, peripheral vision, depth vision and the ability to focus.
We offer competitive compensation package to include Medical/Dental/Vision, Life Insurance, 401k, generous PTO, etc. For consideration, submit your resume to ladavis@triumphgroup.com or fax to: 619/440-2509. To learn more about the company visit us at www.triumphgroup.com. EOE/AA
High school diploma or GED
Applicable technical training courses in metrology, basic trigonometry, ANSI Y14.5 geometric dimensioning & tolerancing, inspection techniques, SPC, plus related experience including CMM operation and surface plate layout.
Minimum 2 years experience required.
Must have experience in both NDT and Dimensional Inspection.
Able to read and explain blueprints/specifications, instructions and understand oral and written instructions.
Able to use a variety of machine and measuring tools.
Certified as a Level II Penetrant Inspector, per SNT-TC-1A and NAS-410.
Must be able to communicate and comprehend both written and oral communication in English.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee is regularly required to talk, hear, and use hands to operate measuring equipment or necessary equipment. The employee is frequently required to stand. Occasionally, the employee is required to walk, sit, reach above the shoulders, stoop, kneel, crouch or crawl.
The employee is required to wear safety glasses while performing this position. When performing penetrant duties, the employee is required to wear rubber gloves.
The employee must regularly lift/move up to 50 pounds when loading/unloading material onto machine. Specific vision requirements of this job include close vision, distance vision, peripheral vision, depth vision and the ability to focus.
We offer competitive compensation package to include Medical/Dental/Vision, Life Insurance, 401k, generous PTO, etc. For consideration, submit your resume to ladavis@triumphgroup.com or fax to: 619/440-2509. To learn more about the company visit us at www.triumphgroup.com. EOE/AA
