Radiographer II
Posted: 4/27/2012 3:48:49 PM
This job is closed
NDT.org Job Number:
30417
* Please reference NDT.org Job Number on all correspondence
Contact:
Shelly Wagner
Phone:
541-316-2662
Company:
PCC Schlosser
State:
OR Oregon
Contact:
Shelly Wagner
Country:
United States
Email:
swagner@pccstructurals.com
PCC Schlosser, Redmond, Oregon
POSITION TITLE: X-Ray Radiographer II
Redmond is located on the eastern side of Oregon’s Cascade Mountain Range
(high desert) and is considered the geographical heart of central Oregon, within
easy access to a multitude of recreational opportunities (mountain climbing at
Smith Rock, skiing at Mt. Bachelor and/or mountain biking one of the many bike
trails). Central Oregon is a great place to visit but even better quality of life
with museums, resorts and several state parks for an active outdoor lifestyle.
POSITION TITLE: X-Ray Radiographer II FLSA: Non-Exempt
(Hourly)
GENERAL SUMMARY:
Position evaluates radiographs of castings according to PCC Schlosser work
instructions and dispositions castings as either acceptable, repair, or scrap.
ESSENTIAL JOB FUNCTIONS:
1. Evaluate, disposition and document the radiographic quality of PCC
Schlosser castings. This process includes but is not limited to the following:
a. Assure castings are in proper department and at the proper operation.
b. Verify work instructions are approved by proper authorities.
c. Verify that the correct part has been radiographed (lot number and serial
numbers match paperwork and film).
d. Assure castings were radiographed according to the proper work
instruction and that the correct operation has been performed (i.e. 100%, Pre-X,
Weld Areas, or Ground Areas).
e. Review weld maps to ensure all welds have been covered radiographically.
f. Detect, identify, evaluate and disposition casting discontinuities and
artifacts per NDT 300 or appropriate addendum and part specific work
instruction.
g. Defect locate and mark casting for repair.
h. Complete preliminary and final film reports using the appropriate database
codes. Sign and stamp film report for archive or shipment to customer with
film.
i. Complete the appropriate logs including Film File Log and Radiographic
Daily Inspection Log.
j. Must be capable of performing all Level I responsibilities as required.
2. Perform daily, weekly, monthly, and yearly calibrations and process
controls per NDT 350.
3. Perform preventive and routine maintenance on X-ray equipment.
4. Responsible for safe work practices by adhering to safety rules, safely
operating all equipment and tools, identifying and reporting any safety
problems.
5. Perform other related duties as assigned by management.
POSITION TITLE: X-Ray Radiographer II
Redmond is located on the eastern side of Oregon’s Cascade Mountain Range
(high desert) and is considered the geographical heart of central Oregon, within
easy access to a multitude of recreational opportunities (mountain climbing at
Smith Rock, skiing at Mt. Bachelor and/or mountain biking one of the many bike
trails). Central Oregon is a great place to visit but even better quality of life
with museums, resorts and several state parks for an active outdoor lifestyle.
POSITION TITLE: X-Ray Radiographer II FLSA: Non-Exempt
(Hourly)
GENERAL SUMMARY:
Position evaluates radiographs of castings according to PCC Schlosser work
instructions and dispositions castings as either acceptable, repair, or scrap.
ESSENTIAL JOB FUNCTIONS:
1. Evaluate, disposition and document the radiographic quality of PCC
Schlosser castings. This process includes but is not limited to the following:
a. Assure castings are in proper department and at the proper operation.
b. Verify work instructions are approved by proper authorities.
c. Verify that the correct part has been radiographed (lot number and serial
numbers match paperwork and film).
d. Assure castings were radiographed according to the proper work
instruction and that the correct operation has been performed (i.e. 100%, Pre-X,
Weld Areas, or Ground Areas).
e. Review weld maps to ensure all welds have been covered radiographically.
f. Detect, identify, evaluate and disposition casting discontinuities and
artifacts per NDT 300 or appropriate addendum and part specific work
instruction.
g. Defect locate and mark casting for repair.
h. Complete preliminary and final film reports using the appropriate database
codes. Sign and stamp film report for archive or shipment to customer with
film.
i. Complete the appropriate logs including Film File Log and Radiographic
Daily Inspection Log.
j. Must be capable of performing all Level I responsibilities as required.
2. Perform daily, weekly, monthly, and yearly calibrations and process
controls per NDT 350.
3. Perform preventive and routine maintenance on X-ray equipment.
4. Responsible for safe work practices by adhering to safety rules, safely
operating all equipment and tools, identifying and reporting any safety
problems.
5. Perform other related duties as assigned by management.
Skills:
KNOWLEDGE, SKILLS, AND ABILITIES:
1. Must show documentation of 80 hours of classroom training and 1600
hours of X-ray experience (800 hours actual film interpretation experience).
2. Must hold a current Level II Certification and recertify every three years.
3. Ability to understand and apply general and complex procedures found in
Work Instructions, Quality Manuals and other technical material. Ability to read
and interpret specifications on drawings and blueprints preferred.
4. Thorough understanding of casting processes, metallurgy, and the
formation of discontinuities.
5. Must have strong math skills and a working knowledge of Algebra.
6. Must have the ability to conceptualize and extrapolate from a 2D-film
environment to a 3D casting.
7. Ability to communicate both orally and in writing.
8. Familiarity with customer material specifications and the ability to follow
written and verbal instructions.
9. Ability to work varying shifts and overtime as needed.
EDUCATION AND EXPERIENCE:
High school diploma or GED. Previous radiographic experience and knowledge
of basic radiographic techniques required.
PHYSICAL REQUIREMENTS:
Ability to sit, stand, possess vision requirements to use radiographic equipment
and to pass a depth perception and color vision test. Ability to exert up to
seventy pounds of force to move objects. Ability to work in conditions which
may include exposure to noise, dust, chemicals, and varying temperatures.
Note: The statements herein are intended to describe the general nature and
level of work being performed by employees assigned to this classification.
They are not intended to be construed as an exhaustive list of all
responsibilities, duties, and skills required of personnel so classified.
PCC Schlosser is an Equal Opportunity Employer.
Apply online at http://www.precast.com/career/current_jobs
1. Must show documentation of 80 hours of classroom training and 1600
hours of X-ray experience (800 hours actual film interpretation experience).
2. Must hold a current Level II Certification and recertify every three years.
3. Ability to understand and apply general and complex procedures found in
Work Instructions, Quality Manuals and other technical material. Ability to read
and interpret specifications on drawings and blueprints preferred.
4. Thorough understanding of casting processes, metallurgy, and the
formation of discontinuities.
5. Must have strong math skills and a working knowledge of Algebra.
6. Must have the ability to conceptualize and extrapolate from a 2D-film
environment to a 3D casting.
7. Ability to communicate both orally and in writing.
8. Familiarity with customer material specifications and the ability to follow
written and verbal instructions.
9. Ability to work varying shifts and overtime as needed.
EDUCATION AND EXPERIENCE:
High school diploma or GED. Previous radiographic experience and knowledge
of basic radiographic techniques required.
PHYSICAL REQUIREMENTS:
Ability to sit, stand, possess vision requirements to use radiographic equipment
and to pass a depth perception and color vision test. Ability to exert up to
seventy pounds of force to move objects. Ability to work in conditions which
may include exposure to noise, dust, chemicals, and varying temperatures.
Note: The statements herein are intended to describe the general nature and
level of work being performed by employees assigned to this classification.
They are not intended to be construed as an exhaustive list of all
responsibilities, duties, and skills required of personnel so classified.
PCC Schlosser is an Equal Opportunity Employer.
Apply online at http://www.precast.com/career/current_jobs
