Cobham Mission Systems is seeking a NDT Inspector for our
Davenport, Iowa facility. The qualified candidate will
work for a dynamic team in a fast-paced, aerospace and
defense manufacturing environment.


Principle Duties and Responsibilities:

-Under limited supervision, the NDT Inspector will
perform visual and penetrant inspection of welds,
forgings, castings, machined surfaces or other fabricated
parts in accordance with company procedures, customer
codes, standards and other contractual documents.
-Maintain certification and calibration of the
fluorescent penetrant processing line.
-Perform inspection, functional testing, type testing and
examination of all product subassemblies, final
assemblies and finished products.
-Perform product and certification verification using
special processing knowledge which includes but is not
limited to the following; NDT process, conversion coat,
welding, passivation, anodize and aluminum heat treat.
-Will perform final and in-process inspection including
detail and assembly compliance verification during
manufacture and final validation prior to stock and/or
installation.
-Must have knowledge of process control techniques,
statistical sampling, torque methods and exposure to
Acceptance Test Methods associated with
hydraulic/pneumatic systems.
-Operates all product related test equipment to analyze,
record, and determine acceptability of product
performance.
-Checks all finished product, associated documentation,
and sales order requirements prior to shipment.
-May perform process validations and process, system or
product audits at CLSS or suppliers’ facilities.
-May perform source inspections or verification of
inspection techniques at suppliers’ facilities.
-Maintains complete and accurate records of inspection
activities.
-Performs all operations according to prescribed safety
and environmental principles.
-All other related duties as assigned.

Knowledge, Skills and Abilities Required:

-High School Diploma or equivalent is required.
-Two years of General Inspection preferred.
-NAS 410 qualified and NDT Level II Certification are
required.
-Welder Inspector Certification is required.
-Two years experience in the inspection of welds,
forgings, castings, and machined surfaces of non-ferrous
alloys.
-Familiar with the requirements of penetrant inspection
specification ASTM E-1417 and MIL-STD-6866.
-Must be able to read and interpret electrical
schematics, blueprints, specifications, written
instructions and sales order requirements.
-Must be capable of performing size, form, orientation,
and runout measurements on standard and special design
measuring equipment.
-Must be able to power up and operator all product
related test equipment.
-Must be able to properly handle and manipulate fragile
parts, completed product, and delicate measuring
equipment without damaging them.
-Must demonstrate ability to maintain complete and
accurate records of inspection activities, using a
computer terminal.
-Must demonstrate good interpersonal skills and be able
to get along with co-workers, suppliers, and customers.
-Must be able to work with minimal supervision in an
office or indoor industrial environment, lift more than
50lbs. frequently, and work in confined spaces.
-Must have 20/20 vision corrected or uncorrected in at
least one eye and average to normal color vision (4 to 6
responses Titmus, B&L or AO Testing machines or
equivalent).


Compensation/Benefits:

-Health, dental, vision, and life insurance
-401K
-Education assistance
-Flex hours
-15 paid holidays
-Fitness center
-Business casual dress


Apply online at: www.cobham.com/davenportemployment

An EOE AA M/F/Vet/Disability Employer