Triumph Precision Components - Fabrication San Diego is located 20 minutes east of downtown San Diego in the city of El Cajon. We have an immediate need for an NDT Inspector with Dimensional inspection background.

This is a full time regular employee position with benefits; not temporary or contract.

Duties and Responsibilities:
1. Plan inspection method including setup and mathematical computations required to layout first article parts to verify conformance to toll design and/or blue print specification.
2. Inspect supplier-furnished raw materials and fabricated or processed parts using standard inspection fixtures or gages to assure visual and dimensional compliance with requirements. Verify that required certifications are present and comply with the purchase order-referenced specifications.
3. Perform receiving inspection, in-process and final inspection of parts and assemblies to assure visual and dimensional compliance to specifications, including use of coordinate measuring machines/Leica Laser, etc.
4. Set-up and Non-Destructive Testing (i.e. FPI/X-Ray/Conductivity/etc.) inspection of material, parts, and weldments, per written procedures, to verify conformance to applicable blueprints and specifications.
5. Set-up and perform Destructive Testing (i.e. Hardiness, Tensile/etc.) inspection of material, parts, and weldments, per written procedures to verify conformance to applicable blueprints and specifications.
6. Perform set-up and mathematical computations required to inspect, adjust, and calibrate measuring equipment, gages, test equipment and qualifying fixtures.
7. Maintain receiving inspection certifications, penetrant inspections files and records. In addition, maintain gage calibration history files and records on active gages.
8. Recall gages for periodic checks to verify continued precision and accuracy.
9. Work with production supervisors and operators to document and maintain statistical process control (SPC) data and charts.
10. Work with technicians/inspectors to upgrade their dimensional inspection skills, improve product quality and qualify technician for inspection certification.
11. Inspects all type of tools and gages, including fixtures, dies, and templates using precision measuring equipment.
12. Performs product, process, work station, and system audits.
13. Perform daily maintenance and minor machine repairs.
14. Ensure proper safety procedure is followed within the team environment.
15. Maintains a clean work environment in full compliance with company standards, customer and government regulations.

EDUCATION AND EXPERIENCE:
• High School diploma or GED certificate.
• Minimum 2+ years applicable technical training courses in metrology, basic trigonometry, ANSI Y14.5 geometric dimensioning & tolerancing, inspection techniques, SPC. Experience with CMM operation and surface plate layout strongly preferred.
• Minimum 2 years direct experience.
• Certified as Level II Radiography and Penetrant inspector per SNT-TC-1A and NAS-410.
• Able to read blue prints/specifications from engineering drawings.
• Ability to use a variety of tools and machines.
• Ability to follow and comprehend verbal and written instructions as well as present information in both verbal and written form.
• Ability to perform basic arithmetic in all units of measurement in percentage, fractions and decimals. Ability to apply concepts and interpret graphs and technical drawings.
• Ability to work well in a diverse and team environment.
• Ability to learn basic computer skills.

For consideration for this position, send resume to: ladavis@triumphgroup.com. We offer competitive compensation package. visit us at www.triumphgroup.com. Equal Opportunity Employer/Affirmative Active Employer/Americans Disability Amendment Act/Veterans/Minorities.