NDT Technician Level II - Multiple Locations Available
Posted: 1/19/2022 2:09:39 PM
This job is closed
NDT.org Job Number:
73151
* Please reference NDT.org Job Number on all correspondence
Contact:
Kendall Bohannon
Phone:
913-888-2321
Company:
PROtect, LLC
State:
NE Nebraska
Contact:
Kendall Bohannon
Country:
United States
Web:
https://protect.llc/
Email:
hr@protect.llc
We are currently seeking NDT Technicians in Lincoln, NE, Midland, TX, Denver, CO, Tulsa, OK, Wichita, KS and Lenexa, KS.
Summary
Conduct NDT inspections of structures, pipelines or other components and materials using x-ray, ultrasound or related equipment.
Essential Functions
•Conduct non-destructive (NDT) testing of components and materials in accordance with applicable codes, standards, equipment utilization, specifications, and procedures.
•Utilize appropriate NDT method to perform NDT inspections, including gamma radiography, x-ray radiography, magnetic particle, liquid penetrant, ultrasonic, leak testing and visual inspections.
•Select, prepare, load, calibrate, or operate equipment used in the non-destructive testing of products or materials.
•Identify defects in materials using appropriate testing technique.
•Complete documentation and work orders thoroughly following established protocols and meeting required timeframes.
•Drive Company vehicles and maintain safe driving record.
•Provide instruction to assigned assistants and ensure safety of entire team.
Other Functions
•Perform general cleaning and minor maintenance duties to maintain company vehicles, routinely inspect equipment and maintain shop areas in a clean, orderly and functional condition.
•Perform duties as assigned.
Summary
Conduct NDT inspections of structures, pipelines or other components and materials using x-ray, ultrasound or related equipment.
Essential Functions
•Conduct non-destructive (NDT) testing of components and materials in accordance with applicable codes, standards, equipment utilization, specifications, and procedures.
•Utilize appropriate NDT method to perform NDT inspections, including gamma radiography, x-ray radiography, magnetic particle, liquid penetrant, ultrasonic, leak testing and visual inspections.
•Select, prepare, load, calibrate, or operate equipment used in the non-destructive testing of products or materials.
•Identify defects in materials using appropriate testing technique.
•Complete documentation and work orders thoroughly following established protocols and meeting required timeframes.
•Drive Company vehicles and maintain safe driving record.
•Provide instruction to assigned assistants and ensure safety of entire team.
Other Functions
•Perform general cleaning and minor maintenance duties to maintain company vehicles, routinely inspect equipment and maintain shop areas in a clean, orderly and functional condition.
•Perform duties as assigned.
Skills:
Knowledge, Skills, Abilities
•NDT Methods – Expertise in multiple NDT methods and willingness to engage in ongoing learning and application of skills.
•Mechanical – Intermediate mechanical knowledge.
•Safety – Knowledge of, and willingness to follow and lead others to follow applicable safety regulations, policies and procedures. Apply these safety standards in the work environment and look out for other crew members.
•Active Listening – Giving full attention to what other people are saying, taking time to understand the points being made, and asking appropriate questions.
•Able to Work a Demanding and Flexible Schedule - Strong work ethic required. Able to work long periods of time, up to 16-hour days. Able to respond to call-outs on short notice and to stay on site, including long distance travel for extended periods of time.
•Physical Demands – Able to frequently lift and carry objects up to 75 pounds on loose, rough or uneven terrain. Able to occasionally exert maximum muscle force to lift, push, pull, or carry objects up to 150 pounds with assistance. Climbing and working at heights, balancing, stooping, kneeling, crouching, reaching, handling, standing for long periods, walking, pushing, pulling, repetitive motion, working in confined spaces, working in extreme cold and heat, visual acuity, working near hazards including moving mechanical parts, working near electrical components and exposures to chemicals.
•Customer Service – Interact professionally with customers. Punctual arrival to assignments.
•Operation Monitoring – Watching gauges, dials, or other indicators to make sure a machine or process is working properly.
•Active Learning – Understanding the implications of new information for both current and future problem-solving and decision-making.
•Equipment Selection – Determining the kind of tools and equipment needed to do a job.
•Critical Thinking – Use logic and reason to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
•Vision – The ability to see details at close range (within 20 inches). Clarity of vision at 20 feet or more. Ability to observe an area that can be seen up and down or to right or to left while eyes are fixed on a given point.
•Teamwork – able to work effectively as part of a team and to provide instruction to others effectively and professionally.
Education
High School Diploma or GED.
Certification and Licensure
Valid driver’s license. Insurability through PROtect, LLC insurance carrier. Certification in one or more of the following NDT methods: RT, UTT, MT, PT.
Work Experience
Demonstrated NDT skill, knowledge, or experience.
•NDT Methods – Expertise in multiple NDT methods and willingness to engage in ongoing learning and application of skills.
•Mechanical – Intermediate mechanical knowledge.
•Safety – Knowledge of, and willingness to follow and lead others to follow applicable safety regulations, policies and procedures. Apply these safety standards in the work environment and look out for other crew members.
•Active Listening – Giving full attention to what other people are saying, taking time to understand the points being made, and asking appropriate questions.
•Able to Work a Demanding and Flexible Schedule - Strong work ethic required. Able to work long periods of time, up to 16-hour days. Able to respond to call-outs on short notice and to stay on site, including long distance travel for extended periods of time.
•Physical Demands – Able to frequently lift and carry objects up to 75 pounds on loose, rough or uneven terrain. Able to occasionally exert maximum muscle force to lift, push, pull, or carry objects up to 150 pounds with assistance. Climbing and working at heights, balancing, stooping, kneeling, crouching, reaching, handling, standing for long periods, walking, pushing, pulling, repetitive motion, working in confined spaces, working in extreme cold and heat, visual acuity, working near hazards including moving mechanical parts, working near electrical components and exposures to chemicals.
•Customer Service – Interact professionally with customers. Punctual arrival to assignments.
•Operation Monitoring – Watching gauges, dials, or other indicators to make sure a machine or process is working properly.
•Active Learning – Understanding the implications of new information for both current and future problem-solving and decision-making.
•Equipment Selection – Determining the kind of tools and equipment needed to do a job.
•Critical Thinking – Use logic and reason to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
•Vision – The ability to see details at close range (within 20 inches). Clarity of vision at 20 feet or more. Ability to observe an area that can be seen up and down or to right or to left while eyes are fixed on a given point.
•Teamwork – able to work effectively as part of a team and to provide instruction to others effectively and professionally.
Education
High School Diploma or GED.
Certification and Licensure
Valid driver’s license. Insurability through PROtect, LLC insurance carrier. Certification in one or more of the following NDT methods: RT, UTT, MT, PT.
Work Experience
Demonstrated NDT skill, knowledge, or experience.
