Inside Machinist
Posted: 9/19/2022 7:59:41 PM
This job is closed
NDT.org Job Number:
76298
* Please reference NDT.org Job Number on all correspondence
Contact:
Kristen Sisk
Phone:
4703130275
Company:
PMQ Services
State:
VA Virginia
Contact:
Kristen Sisk
Country:
United States
Length:
24 Months
Pay:
$37.50/Hour + $120.00/day Per Diem
Email:
kristen@pmqservices.com
PLEASE SEND RESUME TO KRISTEN@PMQSERVICES.COM
Experience:
Must have experience on:
1) Horizontal Boring Mills, HBM’s will have travel that are in the range of X - 500", Y - 250", Z - 50" and W - 65" they will also have turn tables that are about 10’ square with a load capacity of 100 tons.
2) Vertical Turning Centers, VTC’s will have tables that are roughly 80" in diameter with a 20 ton table capacity. X total travel will be about 160" and Z will have 80" of travel.
3)Minimum of 2-Years in Inside Machine Shop
Required Skills:
1. Safety orientated
• Familiar with Numerical Controlled Processes, Manual Data Input, Tooling Offsets,
Conversation Controllers, etc.
• Operate Manual and/or NC machines such as: lathes, mills, horizontal & vertical machining centers, EDMs, etc.
• Experience with controllers such as: Fanuc, Siemens, Acramatic, Cincinnati-Milacron, etc.
• Familiar with the use of precision measuring instruments: outside/inside micrometers, depth mics, verniers, etc.
• Familiar with threading and the various measuring/gauging requirements
• Drilling/tapping processes
• Familiar with carbide machining processes
• Ability to comprehend complex mechanical drawings and blueprints
• Strong math skills
• Machinist or Tool & Die Apprenticeship
Experience:
Must have experience on:
1) Horizontal Boring Mills, HBM’s will have travel that are in the range of X - 500", Y - 250", Z - 50" and W - 65" they will also have turn tables that are about 10’ square with a load capacity of 100 tons.
2) Vertical Turning Centers, VTC’s will have tables that are roughly 80" in diameter with a 20 ton table capacity. X total travel will be about 160" and Z will have 80" of travel.
3)Minimum of 2-Years in Inside Machine Shop
Required Skills:
1. Safety orientated
• Familiar with Numerical Controlled Processes, Manual Data Input, Tooling Offsets,
Conversation Controllers, etc.
• Operate Manual and/or NC machines such as: lathes, mills, horizontal & vertical machining centers, EDMs, etc.
• Experience with controllers such as: Fanuc, Siemens, Acramatic, Cincinnati-Milacron, etc.
• Familiar with the use of precision measuring instruments: outside/inside micrometers, depth mics, verniers, etc.
• Familiar with threading and the various measuring/gauging requirements
• Drilling/tapping processes
• Familiar with carbide machining processes
• Ability to comprehend complex mechanical drawings and blueprints
• Strong math skills
• Machinist or Tool & Die Apprenticeship
Skills:
Must have experience with Mills and Lathes.
2-Years in Machining.
2-Years in Machining.
