Search Returned 22 Documents:
Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 10/10/2023 Industrial Inspection & Analysis is looking for an Advanced Shearwave/PAUT Technician to join our Advanced NDE group (preferably located in Salt Lake City, UT; Denver, CO; Omaha, NE; Des Moines, IA; Davenport, IA; or Moline, IL). The technician will perform hands-on Non-Destructive Testing and Examination (NDT / NDE) at customer sites and / or IIA business locations in support of IIA projects...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 11/13/2018 TEAM is looking for a full time API 510/570 Inspector to work in Sioux City, Iowa. Must live near or relocate to Sioux City, IA for this position. Minimum 40 hours a week. Relocation offered to the right candidate. Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 12/20/2017 Mistras Group, Inc. is hiring full time benefited Inspectors in support of major Midstream customer. Inspector qualifications are as follows: • Must have current API 510 and 570 certifications with at least 5 years’ experience • Must be knowledgeable in midstream/gas plant/NGL type equipment • Must be able to work independently • Knowledgeable in basic spreadsheet and Word software, PCMS i...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 10/6/2017 Fulltime API 510/570/UT Wanted – Multiple Locations in United States Base Plants: Oakland City, IN or Greensburg, PA (9 stations, extensive travel), Iowa City, IA (15 stations, extensive travel), McPherson, KS (6 stations, extensive travel), Malaga, NM (Base only, 3 plants, extensive travel), Malaga, NM (3 plants), Alpharetta, GA (11 plants, extensive travel), Pinedale, WY (6 stations), Opal, ...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 7/5/2017 QC Weld Inspector Hiring at Multiple Locations: Alvarado,Texas, Hicksville,Ohio, and Sioux City,Iowa Responsibilities: •The AWS Inspector is responsible to ensure that all parts, shafts, and/or poles meet standards set forth by design requirements. •Performs all inspection in accordance with AWS QC1. •Performs Visual Weld Inspections to the requirements of AWS D1.1. •Responsible for vi...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 5/30/2017 Mistras is staffing a multi-site Midstream project requiring full time nested API Inspectors for permanent assignments. Inspector qualifications are as follows: • Must have current API 510 and 570 certifications • Must be knowledgeable in midstream/gas plant/NGL type equipment • Must be able to work independently • Knowledgeable in basic spreadsheet and Word software, PCMS is a plu...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 5/17/2016 Sabre Industries is an industry leader in the utility and telecommunication markets. Sabre's Sioux City, IA location designs and manufactures steel utility and wireless poles and towers to customer needs. QC Ultrasound Tech A (NDT UTII) position is responsible for ensuring that all parts, shafts, arms and/or poles meet the quality standards set by the Company through performing UT and other ND...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 2/19/2016 Johnson Machine Works is a job shop steel fabricator and we have a need for a Professional Level II UT and ideally a Level II MT to perform in process, in shop inspections. This is a full time, permanent position with no travel required. This is a day shift with the exception of special circumstances when a night shift is required for a period of time. Duties would include performing inspec...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 6/9/2015 QCTL Inc. has an immediate opening for qualified individuals with strong pressure vessel, tank or piping inspection background. This is a full time position with some overnight travel required. Must have current API certifications and good communication skills. Computer skills in Microsoft Office Word and Excel required. Position may not require relocation depending on current area of ...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 9/16/2013 Position Title: Level II Technician – Phased Array (AUT) Location: Iowa (around Sioux City) REPORTING RELATIONSHIPS Reports to: Branch Manager or Project Manager POSITION SUMMARY The Technician Level II – Phased Array (AUT) is responsible for performing various methods of NDT/NDE in the methods they are certified, detailing examination findings in report format, and interfacing with the cust...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 7/19/2011 At Quatro Composites™ we offer a full line of services including design, analysis, laminate optimization, quick prototyping and qualified production of carbon fiber composites and advanced composite structures. Our OptiPart™ composite optimization process results in significant weight savings over equivalently loaded aluminum structures. We specialize in the design of highly loaded brackets and fi...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 2/14/2008 Flint Hills Resources is a leading producer of fuels, petrochemicals and other petroleum products such as base oils for lubricants and asphalt. The company, based in Wichita, Kan., has expanded its operations through capital projects and acquisitions worth more than $3 billion since 2002. The company also has associated capabilities in refined products and base oils marketing and crude oil supply ...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 6/13/2007 QC Consulting & Management, LLC is a Pittsburgh, PA based firm offering Quality Control Management, Weld Consulting and Visual Weld Inspection services. The owner has over 25 years in the NDE/Visual weld inspection field and is very interactive with each project. This is a start-up company that has potential work in several areas of the United States. Currently, these areas include, but are not li...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 9/26/2006 Looking for senior level II inspector with strong castings experience. Position is film interpretation of Magnesium and Aluminum casting Radiographs. Expected schedule is 7 days a week, 12 hours per day. $25 per hour ST, $37.50 per hour OT. Previous level III's desirable but not required. Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 9/13/2006 Excellent Opportunity!! Position located in Southwestern Iowa. Work Schedule is 7 days/week, 12 hours/day. (Some flexibility in work schedule.) Performs equipment calibrations and conducts tests in accordance with procedures approved by the Level III Technician. Interprets, evaluates and documents test results. Typical Duties: 1. Conducts a variety of tests using established methods. Tasks are per...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 8/18/2006 Excellent Opportunity!! Position located in Southwestern Iowa. Work Schedule is 7 days/week, 12 hours/day. (Some flexibility in work schedule.) Performs equipment calibrations and conducts tests in accordance with procedures approved by the Level III Technician. Interprets, evaluates and documents test results. Typical Duties: 1. Conducts a variety of tests using established methods. Tasks are per...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 8/15/2006 Excellent Opportunity!! Position located in Southwestern Iowa. Work Schedule is 7 days/week, 12 hours/day. (Some flexibility in work schedule.) Performs equipment calibrations and conducts tests in accordance with procedures approved by the Level III Technician. Interprets, evaluates and documents test results. Typical Duties: 1. Conducts a variety of tests using established methods. Tasks are pe...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 8/9/2006 Excellent Opportunity!! Position located in Southwestern Iowa. Work Schedule is 7 days/week, 12 hours/day. Performs equipment calibrations and conducts tests in accordance with procedures approved by the Level III Technician. Interprets, evaluates and documents test results. Typical Duties: 1. Conducts a variety of tests using established methods. Tasks are performed both in the laborator...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 7/13/2006 Excellent Opportunity!! Position located in Southwestern Iowa. Work Schedule is 7 days/week, 12 hours/day. Performs equipment calibrations and conducts tests in accordance with procedures approved by the Level III Technician. Interprets, evaluates and documents test results. Typical Duties 1. Conducts a variety of tests using established methods. Tasks are performed both in the laboratory...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 6/9/2006 Excellent full-time opportunity! Position has full benefits! Performs equipment calibrations and conducts tests in accordance with procedures approved by the Level III Technician. Interprets, evaluates and documents test results. Typical Duties 1. Conducts a variety of tests using established methods. Tasks are performed both in the laboratory and off site. Prepares test specimens, sets ...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 5/22/2006 Excellent opporunity!!! Position is X-Raying of aerospace components in Southwestern Iowa. Position Concept Performs equipment calibrations and conducts tests in accordance with procedures approved by the Level III Technician. Interprets, evaluates and documents test results and supervises work performed by Trainees and Level I Technicians. Typical Duties 1. Conducts a variety of tests usi...Read More Location: NDT.org : Industrial and NDT Jobs : NDT Inspection Jobs : Posted: 3/9/2006 Location: Wichita, Kansas Iowa (exact city TBA) Responsibilities: Perform functions associated with complete assessment of FCC unit (fitness for purchase) Qualifications: A. Certifications API 510, 570 AWS Certified Welding Inspector (CWI) ...Read More On the web we found:
|