experienced welding inspector
NDT.org Member Since: 2005
Added: 6/25/2005
Last Updated: 6/25/2005
Last Updated: 6/25/2005
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
ON Ontario
Country:
canada
Status:
I am willing to Travel.
I need a job as soon as possible.
I am willing to work overseas.
I prefer permanent jobs.
I need a job as soon as possible.
I am willing to work overseas.
I prefer permanent jobs.
Certifications
Professional Qualification:
1 Conversant with Interpretation of NDT in UT, RT & MPT as per ASNT Level-II (Certificates to be renewed except UT)
2 CSWIP Welding Inspector Certification from TWI -UK.
3 NACE painting certification from NACE-India society.
4 AWS-CWI from ISNT India society.
5 TLD surveyor Level-II certification for transport equipment from Bureau Veritas.
6 Conversant with codes ASME SEC-II,V,VIII & IX.
/ANSI/AWS D1.1/PD 5500 & TEMA.
Offshore Basic Qualification:
7 Certificate in personal survival technique
8 Primary fire fighting & fire prevention certification.
9 Proficiency in elementary first aid certification
1 Conversant with Interpretation of NDT in UT, RT & MPT as per ASNT Level-II (Certificates to be renewed except UT)
2 CSWIP Welding Inspector Certification from TWI -UK.
3 NACE painting certification from NACE-India society.
4 AWS-CWI from ISNT India society.
5 TLD surveyor Level-II certification for transport equipment from Bureau Veritas.
6 Conversant with codes ASME SEC-II,V,VIII & IX.
/ANSI/AWS D1.1/PD 5500 & TEMA.
Offshore Basic Qualification:
7 Certificate in personal survival technique
8 Primary fire fighting & fire prevention certification.
9 Proficiency in elementary first aid certification
Education
Educational Qualification:
1 1995 Master of Technology in Mechanical (Foundry Engineering) Indian Institute of Technology India.
2 1993 Bachelor of Engineering (Mechanical)
Sambalpur University India.
1 1995 Master of Technology in Mechanical (Foundry Engineering) Indian Institute of Technology India.
2 1993 Bachelor of Engineering (Mechanical)
Sambalpur University India.
Experience
Employment History:
1998-2005
Industrial Inspection Surveyor
Bureau Veritas, Energy & Process Division Mumbai India.
1 Inspected structural fabrication in workshop/yard related to Raw Material Inspection, Welding & NDT witness, Review of QAP,QA& NDT Documents /Procedures for oil & gas platforms as per standards API RP 2A, 2H, 2B & AWS D1.1 for ONGC's various project.
2 Reviewed/Monitored/Verification of under- water activities like periodical Inspection, Installation of Clamp on structure of existing wellhead platforms of ONGC's.
3 Inspected Stage wise Installation at offshore of Oil & Gas platforms, Deck modules& Top side Modification as per relevant Codes/Standards/Company Approved procedures on board DB-27 Mcdermott's derrick Barge.(3 Nos projects of ONGC's).
4 Certified, by Inspecting and Auditing as a company representative (Third Party Inspection) A total fabrication and Installation of Offshore platforms(Top side & Underwater inspection)
5 Inspected painting of API storage tanks, LPG Bullets and
offshore structural relevant to client specification.
3 Inspected Manufacturing & Coating of cross country pipelines (42" dia max)700 kms approx. as per client Specification (NIOC, GAIL & GSPL Project).
4 Inspected laying of cross-country Onshore pipelines for Monitoring of welding, Review/Witness of NDT, Weld visual& Destructive Test at site as a part of Certifying Agency for a total pipeline project (GAIL & GSPL Project).
5 Inspected & Certified, fabrication of new equipments by stage wise inspection of pressure vessels, boilers, columns, API storage tanks, Heat exchangers, Piping & Raw materials intended for Refinery, Petroleum & Power generation units as per National (Indian Standard) & International Standards (ASME SEC-8,5,2 & PD 5500).
6 Inspected Incoming Raw Material as plates, valves ,fittings, pipes, tubes, castings& forgings as per Standards used for fabrication purposes as per Customer/ ASME/ANSI Specification.
7 Monitored In process Welding & Also Assisted to improve Quality of Welding.
8 Reviewed Radiography films, Witnessed MPI , PT& Laboratory Destructive Test as & When required during process of fabrication.
9 Reviewed & Prepared QA Documents & WPS/PQR/WPQ Test documents as per client specification.
10 Vender Evaluation and Assessment capacity for fabrication of equipments carried out as per guidelines of clients.
11 Witnessed Annual Approval of UTM Machines, charpy test machine & welding electrode qualification as per code requirements.
12 Inspected Mobile tankers as a part of annual certification.
Major Accomplishments:
1 Stayed in Mcdermott barge during offshore Installation project for 70 days In single stretch in the interest of Early completion of project.
2 Taken Active part in Installation Team thereby to downsize project time and thereby cost.
3 Witnessed ultrasonic testing of small tube diameter intended for Nuclear power corporation projects.
4 Renovated& Recertified of 3 nos urea reactors (11 years old) as per clients guidelines.
Employment History:
1995-1998
Production Engineer.
Bharat Heavy Plates & Vessels, production Dept India.
1 Assisted for the qualification of welders for welding jobs as per code requirements.
2 Supervised stage wise production of pressure vessel, Heat exchanger, columns, Boilers & reactors.
3 Supervised stage wise production of components of equipments by hot forming & Heat treatment procedures.
4 Conducted NDT test of final product equipments.
5 Managed workforce in production shift.
6 Witnessed final production tests like hydro test, leak test, vacuum test & Visual, dimensional check.
7 Prepared QAP, NDE plans, hydro test procedure& heat treatment procedure as per ISO 9000 requirements.
1998-2005
Industrial Inspection Surveyor
Bureau Veritas, Energy & Process Division Mumbai India.
1 Inspected structural fabrication in workshop/yard related to Raw Material Inspection, Welding & NDT witness, Review of QAP,QA& NDT Documents /Procedures for oil & gas platforms as per standards API RP 2A, 2H, 2B & AWS D1.1 for ONGC's various project.
2 Reviewed/Monitored/Verification of under- water activities like periodical Inspection, Installation of Clamp on structure of existing wellhead platforms of ONGC's.
3 Inspected Stage wise Installation at offshore of Oil & Gas platforms, Deck modules& Top side Modification as per relevant Codes/Standards/Company Approved procedures on board DB-27 Mcdermott's derrick Barge.(3 Nos projects of ONGC's).
4 Certified, by Inspecting and Auditing as a company representative (Third Party Inspection) A total fabrication and Installation of Offshore platforms(Top side & Underwater inspection)
5 Inspected painting of API storage tanks, LPG Bullets and
offshore structural relevant to client specification.
3 Inspected Manufacturing & Coating of cross country pipelines (42" dia max)700 kms approx. as per client Specification (NIOC, GAIL & GSPL Project).
4 Inspected laying of cross-country Onshore pipelines for Monitoring of welding, Review/Witness of NDT, Weld visual& Destructive Test at site as a part of Certifying Agency for a total pipeline project (GAIL & GSPL Project).
5 Inspected & Certified, fabrication of new equipments by stage wise inspection of pressure vessels, boilers, columns, API storage tanks, Heat exchangers, Piping & Raw materials intended for Refinery, Petroleum & Power generation units as per National (Indian Standard) & International Standards (ASME SEC-8,5,2 & PD 5500).
6 Inspected Incoming Raw Material as plates, valves ,fittings, pipes, tubes, castings& forgings as per Standards used for fabrication purposes as per Customer/ ASME/ANSI Specification.
7 Monitored In process Welding & Also Assisted to improve Quality of Welding.
8 Reviewed Radiography films, Witnessed MPI , PT& Laboratory Destructive Test as & When required during process of fabrication.
9 Reviewed & Prepared QA Documents & WPS/PQR/WPQ Test documents as per client specification.
10 Vender Evaluation and Assessment capacity for fabrication of equipments carried out as per guidelines of clients.
11 Witnessed Annual Approval of UTM Machines, charpy test machine & welding electrode qualification as per code requirements.
12 Inspected Mobile tankers as a part of annual certification.
Major Accomplishments:
1 Stayed in Mcdermott barge during offshore Installation project for 70 days In single stretch in the interest of Early completion of project.
2 Taken Active part in Installation Team thereby to downsize project time and thereby cost.
3 Witnessed ultrasonic testing of small tube diameter intended for Nuclear power corporation projects.
4 Renovated& Recertified of 3 nos urea reactors (11 years old) as per clients guidelines.
Employment History:
1995-1998
Production Engineer.
Bharat Heavy Plates & Vessels, production Dept India.
1 Assisted for the qualification of welders for welding jobs as per code requirements.
2 Supervised stage wise production of pressure vessel, Heat exchanger, columns, Boilers & reactors.
3 Supervised stage wise production of components of equipments by hot forming & Heat treatment procedures.
4 Conducted NDT test of final product equipments.
5 Managed workforce in production shift.
6 Witnessed final production tests like hydro test, leak test, vacuum test & Visual, dimensional check.
7 Prepared QAP, NDE plans, hydro test procedure& heat treatment procedure as per ISO 9000 requirements.
Comments
Career Objective: A position as QA/QC Head and Leader in welding Inspection in offshore structural fabrication/installation.
Career Summery :
1 A total of 10 years of experience in Service Industry worked as a Third party Inspection Services for National and International clients.
2 Excellent communication skills.
3 High Aptitude to learn new skills within short period of time.
4 Ability to work in demanding/challenging/competitive working environment.
5 Capable of working independently or with team and also as a team leader.
6 Assists clients in resolving problems associated with quality related problems.
7 Proficient in MS Word & Excel, familier with Internet and E-mail.
Career Summery :
1 A total of 10 years of experience in Service Industry worked as a Third party Inspection Services for National and International clients.
2 Excellent communication skills.
3 High Aptitude to learn new skills within short period of time.
4 Ability to work in demanding/challenging/competitive working environment.
5 Capable of working independently or with team and also as a team leader.
6 Assists clients in resolving problems associated with quality related problems.
7 Proficient in MS Word & Excel, familier with Internet and E-mail.
