MT LEVEL II, VT Level II, UT Level II and RT and PT Level I

Moraine Valley NDT Training and Certification.
Completed Visual Inspection (c.w.i) training on 12/17/10 at Moraine Valley.
ACI training and QC/QA experience.

Edward Romero
9244 South Harding Ave
Evergreen Park, IL 60805
Cell:708-334-6090
Email:eddieromero@comcast.net
Objective
I am seeking a career in a detailed oriented environment with growth potential, and expanded responsibilities.

Profile & Experience
2012-Present Underwriters Laboratories
2011-2012 Granite/General Electric
2010-2011 Globex/US Steel
2008 STV Inc. /CTA
2007-2008 Kiewit/Reyes AJV
2005-2007 WNH and STS/MTS Consulting Engineers
2001-2005 Union Pacific Rail Road

Relevant Experience
2012-Present Underwriters Laboratories-Fire Equip Services
Field Rep Specialist-NDT Level II
• Qualified to inspect aerial ladders, ground ladders & platforms
• Followed all NFPA and manufactured guidelines and standards
• Responsibilities incl out of state travel
• Visual & operational inspections on aerials

2011-2012 Granite/General Electric
Remote Visual Inspection Field Tech
• Performed Remote Visual Inspection using Boroscope to a variety of clients including Refineries, Utilities, Chemical
• Plants, Wind and other testing companies.
• Prepare reports for review by FST.
• Required to become a qualified radiation worker and work in radiation areas in nuclear power facilities.
• Worked with Field Service Mentor.
• Was required to travel out of state for a few weeks.
2010-2011 Globex Corporation
Non Destructive Inspector
• Responsible in the inspections of all lifting devices at U.S. Steel at Gary Works.
• Inspections conducted using Magnetic Particle, Liquid Penetrant and Ultrasonic testing.
• Performed Visual inspections VT, of all Welds on lifting devices/monthly inspections.
• Inform client of deficiencies via diagrams, drawings, photographs and written reports.
• Write daily inspection reports.
• Inspections conducted at Blast Furnace, Coke Oven, Pickle, Sheet, Tin Line and through-out all US Steel.

2008 STV/CTA
CTA Project Inspector
• Construction Manager for STV, inspecting as a subcontractor for CTA on Red/Blue line modifications.
• Responsible for inspection of concrete demolition, prep, and repairs.
• Inspection of all sand blasting of metal, walls, handrails, and emergency hatch doors. Also responsible for inspection of prep work prior to paint and post paint.
• Supervised all electrical removal of all existing conduit, lights, electrical panels, and the replacement of all per project specifications.
• Plumbing: supervised and inspected the removal of all 4in drainage pipe thru out all egression exits and supervised and inspected installation of 4inch pipe thru out all exits.
• Supervised and coordinated all daily activities with Foreman of electrical, plumbing, painting and concrete.
• Reported daily inspection reports thru lap top and Blackberry PDA.
• Communication with power control for track movement and construction laborers to monitor all safety rules and regulations.

2007-2008 Kiewit/Reyes AJV
QC Inspector/ O Hare Modernization project
• Assisted in inspections of Junction chambers/ EDS/Div pump stations, runway expansions, moisture/Density test.
• Rebar inspections
• Excavation embankment and backfill procedures.
• Perform nuclear density tests for required compaction using Troxler Model 3400 series.
• Perform Soil penetrometer tests on foundation soils.
• Perform proof rolling operation for sub grade suitability.
• Write daily inspection reports.
• Communicate progress and deviation with City of Chicago QA.












2005-2007 WNH and STS/MTS Consulting Engineers
Lead Testing Technician & Inspector
• Quality Inspector for CTA-Redline Renovations- Abatement & Paint.
• Full time inspector for new construction of residence building for Lewis University in Romeoville. .
• Performed Immediate Bearing Value IBV tests per latest Illinois Department of Transportation guidelines for Sub grade Suitability with dynamic cone penetrometer.
• Monitor undercut area stone placement, Foundation Inspection
• Concrete tester for compliance checking of project plans and specifications requirements.
• Cast strength specimen, Testing for air entrainment and slump of ready mixed concrete
Communicate progress and deviation with the client.
• Assistant Technician Soil testing services for new waste water treatment facility that includes Pumping and preliminary pumping buildings, detention ponds, oxidation ponds, final clarifiers, bio solids storage tanks and parking lots.
• Full-time inspector at “The Clare Superstructure High-Rise


2001-2005 Union Pacific Railroad Northlake, IL
Conductor/ RCL Engineer
• Extensive experience in Railroad Industry. Train Operations and movement; assure safe, on-time/on-plan train operations.
• Qualified Locomotive Engineer (RCL-License)
• Perform switching operations for car routing, delivery and pick up.
• Conduct train and equipment inspections.
• Interpret and assure compliance with signals.
• Practice safe work habits and assure compliance with company and industry rules, general orders, and instructions.
• Observe track conditions for broken rails, defective switches.
• Transmit information using on-board computer terminals and other communications equipment; receive relay, act upon instructions and inquiries received from train operations and customer service center personnel.
• Follow company and federal safety rules, policy, and procedures.
• Communicate with local industrial customers concerning their transportation requirements and service problems.
• Responsible for entire train consist.



Education
2009-2010 Moraine Valley Community College Palos Hills, IL
• Non Destructive Testing Program Completed
• Certified Welding Inspector Class Completed 12/2010


Skills & Certifications
• Longitudinal Ultrasonic Evaluation (UT 1- UT II)
• Radiation Safety completed 10/09- Level 1
• Magnetic Particle ATA-105 & ANSI/ANST-CP-189 STANDARD-Level 1/Level II
• Liquid Penetrant ATA-105 & ANSI/ASNT-CP-189 STANDARD-Level 1
• Troxler Certified HAZMAT Radiation Safety Course.
• IDOT- QC/QA Certified
• ACI Level I Course re-certified completed 5/09/09
• General code of Operating Rules Certified.
• Safety Rules Certified.
• Air Brake & Train Handling Certified.
• Class 06-Remote Control Operator Certified.
• Proficient in daily inspections of locomotive engines.
• Knowledge of steel products- Steel pipe & tubes- Including Alloy,Stainless,Copper,PVC, Fittings & Flanges, Aluminum, and Steel Banding.
• OSHA 30 Certified
• TWIC Card- expires 2016
• Three Rivers Safety Council.
• Fluent in Spanish.



References available upon request

Edward Romero
9244 S. Harding Ave
Evergreen Park, IL 60805
708-334-6090
eddieromero@comcast.net

To whom it may concern:

I have worked in the NDT industry for a few years , and I am familiar with specific duties such as conducting penetrant, ultrasonic, and magnetic particle, visual tests on metal parts to determine if the parts meet nondestructive specifications.
I recently worked for Underwriters Laboratories as a Field Rep Specialist –NDT Level II conducting the following:

• Visual inspection of hydraulic and mechanical components of the aerial device.
• Torque verification of critical mounting bolts.
• Operational testing of the aerial device
• Nondestructive examination of all accessible structural welds
• ALL Waterway system tests
• Calibration of equipment

I am available for an in-person meeting to talk over the expectations you may have for nondestructive tech and how I can become a productive member of your team.
I look forward to hearing from you and thank you for your time and consideration.
Sincerely,

Edward Romero
NDT Level II