NAS 410- ASNT LEVEL II MT PT UT RT VT
NDT.org Member Since: 2011
Added: 5/22/2011
Last Updated: 5/22/2011
Last Updated: 5/22/2011
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
IA Iowa
Country:
United States
Status:
Certifications
Certifications:
ASNT TC-1A/ NAS 410 Liquid Penetrant Level II
ASNT TC-1A/ NAS 410 Magnetic Particle Level II
ASNT TC-1A Ultrasonics Level II (longitudinal)
ASNT TC-1A/ NAS 410 Visual Level II
ASNT TC-1A/ NAS 410 Radiography Level II
ASNT TC-1A Level II academic and level I practical in Eddy Current
State license IRRSP radiographer (Illonois/Iowa)
ASNT TC-1A/ NAS 410 Liquid Penetrant Level II
ASNT TC-1A/ NAS 410 Magnetic Particle Level II
ASNT TC-1A Ultrasonics Level II (longitudinal)
ASNT TC-1A/ NAS 410 Visual Level II
ASNT TC-1A/ NAS 410 Radiography Level II
ASNT TC-1A Level II academic and level I practical in Eddy Current
State license IRRSP radiographer (Illonois/Iowa)
Education
Education: 01/2004-12/2004 The Ocean Corporation Houston, Tx
Graduated with Degree in Non Destructive Testing
Total of 750 in classroom and hands on training in the Radiographic, Magnetic Particle, Liquid Penetrant, Ultrasonic’s, Eddy Current, and Visual testing methods. Also basic metallurgy, welding technology, materials technology, and technical mathematics.
40 hour industrial radiography safety course which conforms to the requirements of ASNT IRRSP program.
40 hour HAZMAT training.
Graduated with Degree in Non Destructive Testing
Total of 750 in classroom and hands on training in the Radiographic, Magnetic Particle, Liquid Penetrant, Ultrasonic’s, Eddy Current, and Visual testing methods. Also basic metallurgy, welding technology, materials technology, and technical mathematics.
40 hour industrial radiography safety course which conforms to the requirements of ASNT IRRSP program.
40 hour HAZMAT training.
Experience
Experience:
Performed the Radiographic testing method using a Pantec x-ray tube and Varian x-ray unit. Utilizing the radiographic inspection method on a wide variety of metallic materials such as forgings, castings, tubing, pipe, fabricated and manufactured extrusion welds, and other various parts. Also experienced using a Iridium 192 source for field radiography of pipe welds, pressure vessels, and storage tanks and establishing a 2mr boundary and proper usage of dosemitry and rate meters. Responsible for determining the proper x-ray units, focal spot size, and focal film distance using radiographic codes and specifications. Experienced in determining the type and position of penetrameters to be used to qualify the radiograph. Able to read and interpret film and compare specimens with drawings and specifications. Also experienced in film processing and darkroom techniques.
Performed the Liquid Penetrant testing method using magnaflux visible dye solvent removable, magnaflux water washable, magnaflux fluorescent, and magnaflux post emulsifiable liquid penetrants with dry, non-aqueous wet, and wet developers. Inspecting various types of sand castings, investment castings, weldments, sub-weldments, forgings, and pipe welds to locate primary, secondary, and service induced discontinuities such as cracks, crater cracks, pin holes, laminations, and other defects open too the surface. Skilled using the proper techniques in the interpretation and evaluation of liquid penetrant test results by using adequate lighting, and proper use of a black light when applicable. Also in using the proper dwell times as specified in codes and procedures. Experienced in the documentation of liquid penetrant test results.
Experienced using the Magnetic Particle testing method using magnaflux wet, magnaflux dry, and magnaflux wet fluorescent testing methods using circular and longitudinal magnetic fields using head shots, coil shots central conductor shots, prods, and yokes to detect defects on or near the surface of a variety of ferromagnetic material. Experienced in interpretation and evaluation of magnetic particle test results and the proper use of black lights when applicable.
Also experienced using the ultrasonic test method to determine accurate thickness measurements and scanning pipe and other various materials using longitudinal saves for defects on the surface or sub-surface using a panametrics 36dl or krautkramer meters. Also have the training hours to obtain certification in shear wave ultrasonic’s.
Also performed Visual weld examinations and welding audits on individual welders to make sure welds were correct size, being welded according to procedures and drawings.
Performed the Radiographic testing method using a Pantec x-ray tube and Varian x-ray unit. Utilizing the radiographic inspection method on a wide variety of metallic materials such as forgings, castings, tubing, pipe, fabricated and manufactured extrusion welds, and other various parts. Also experienced using a Iridium 192 source for field radiography of pipe welds, pressure vessels, and storage tanks and establishing a 2mr boundary and proper usage of dosemitry and rate meters. Responsible for determining the proper x-ray units, focal spot size, and focal film distance using radiographic codes and specifications. Experienced in determining the type and position of penetrameters to be used to qualify the radiograph. Able to read and interpret film and compare specimens with drawings and specifications. Also experienced in film processing and darkroom techniques.
Performed the Liquid Penetrant testing method using magnaflux visible dye solvent removable, magnaflux water washable, magnaflux fluorescent, and magnaflux post emulsifiable liquid penetrants with dry, non-aqueous wet, and wet developers. Inspecting various types of sand castings, investment castings, weldments, sub-weldments, forgings, and pipe welds to locate primary, secondary, and service induced discontinuities such as cracks, crater cracks, pin holes, laminations, and other defects open too the surface. Skilled using the proper techniques in the interpretation and evaluation of liquid penetrant test results by using adequate lighting, and proper use of a black light when applicable. Also in using the proper dwell times as specified in codes and procedures. Experienced in the documentation of liquid penetrant test results.
Experienced using the Magnetic Particle testing method using magnaflux wet, magnaflux dry, and magnaflux wet fluorescent testing methods using circular and longitudinal magnetic fields using head shots, coil shots central conductor shots, prods, and yokes to detect defects on or near the surface of a variety of ferromagnetic material. Experienced in interpretation and evaluation of magnetic particle test results and the proper use of black lights when applicable.
Also experienced using the ultrasonic test method to determine accurate thickness measurements and scanning pipe and other various materials using longitudinal saves for defects on the surface or sub-surface using a panametrics 36dl or krautkramer meters. Also have the training hours to obtain certification in shear wave ultrasonic’s.
Also performed Visual weld examinations and welding audits on individual welders to make sure welds were correct size, being welded according to procedures and drawings.
Comments
Work History: 01/2007- Present Tacom Rock Island Arsenal U.S. Department of Defense
Duties: Performed level II inspections using RT, MT, UT, PT, and VT for the U.S. Army M119 Howitzer, FRS (forward repair system), SECM, and other DoD weapons projects according to MIL-HDBK 1895B, 1894B, 1265, 1264, MIL-STD 6866, 1949, AMS E433-71, ASTM E165-80, MIL-M-11472.
Supervisor: Jim Fox 309-782-6465
09/2005-06-2007 Quad City Testing Laboratory
Duties: Performed RT, MT, PT, UT and VT field inspections at various pipelines, chemical plants, power plants, water towers, storage tanks, paper mills, and nuclear power plants. According to ASTM, ASME, and API codes and procedures.
01/2005-06-2005 Sonic Systems/GE Nuclear Services
Duties: Performed UT, MT, and PT inspections at several nuclear power plants outages across the U.S
WILLING TO RELOCATE
Duties: Performed level II inspections using RT, MT, UT, PT, and VT for the U.S. Army M119 Howitzer, FRS (forward repair system), SECM, and other DoD weapons projects according to MIL-HDBK 1895B, 1894B, 1265, 1264, MIL-STD 6866, 1949, AMS E433-71, ASTM E165-80, MIL-M-11472.
Supervisor: Jim Fox 309-782-6465
09/2005-06-2007 Quad City Testing Laboratory
Duties: Performed RT, MT, PT, UT and VT field inspections at various pipelines, chemical plants, power plants, water towers, storage tanks, paper mills, and nuclear power plants. According to ASTM, ASME, and API codes and procedures.
01/2005-06-2005 Sonic Systems/GE Nuclear Services
Duties: Performed UT, MT, and PT inspections at several nuclear power plants outages across the U.S
WILLING TO RELOCATE
