•API 510 Pressure Vessel Inspector – Certification 24154, Original 2002
•API 653 Above Ground Storage Tank Inspector– Certification 23912, Original 2002
•API 570 Piping Inspector– Certification 23762, Original 2002
•API 571 Corrosion and Materials -Certification 38788, Original 2010
•AWS CWI Certified Welding Inspector– Certification 04010141, Original 2003

•Rust Busters, Damage Mechanisms prep class Certificate 2010
•American Welding Society, CWI prep class Certificate 2003
•Code West, API 570 Prep Class Houston, TX Certificate 2002
•Tulsa Technology Center, Aircraft Maintenance, Tulsa, OK Graduated 1997
•Tulsa Central High School Tulsa, OK Diploma 1996

Versa @ OCI , Beaumont TX
February 26, 2018 – Current
API 510, 570, 653, 571 UT thickness, PT, MT External inspections and mechanical integrity setup.

PetroChem TUV SUD OCI , Beaumont TX November 2 2015 – February 23, 2018
API 510, 570, 653, 571 UT thickness, PT, MT External inspections and mechanical integrity setup.

Weld Spe OCI , Beaumont TX November 2012 – November 2015
API 510, 570, 653, 571 UT thickness, PT, MT External inspections and mechanical integrity setup.

Mistras (Houston Office) OCI (Pandora Methanol), Beaumont TX February 2012 – October 2012
•API 510, 570, 653, 571 External inspections and mechanical integrity setup.

Alltech inspections (Houston Office) (OCI) Pandora Methanol, Beaumont TX
January 2012 – February 2012
•API 510, 570, 571 External piping inspections and 3rd party review of packages.

QCTL Inc (Quad Citys Testing Laboratory) at Numerous
April 2011 – June 2011
•API 510, 570, 653, 571, CWI, PT, MT, UT Thickness, ISO metric drawings, Turn around, on-stream, API Inspector performing daily internal and external inspections including repair plans for multiple plants

Weld Spec / Tech Corr / CATSI(Moved due to PO#)at Valero Refinery; Port Arthur, TX
November 2010 – March 2011
•API Inspector performing daily internal and external inspections including repair plans for Unit inspector
•API 510, 570 turnaround inspector for the DBU Debutanizer , performing internal inspections, on vessels and piping.
•API 510, 570 turnaround inspector for the CRU, performing inspections, on vessels and piping.

Gulf Engineering at Dow Chemical; Taft, LA
March 2010 – October 2010
•Unit Inspector performing daily internal and external inspections including repair plans for multiple areas, including the tank farm.
•Lead Inspector for the Ethoxylates Park Turnaround (FDA regulated)
•Lead Inspector for the Polyethylene Turnaround
•API 510 turnaround inspector for the Butanol, performing internal inspections, direct and remote, on vessels

All Tech at Valero Refinery; Corpus Christi, TX
February 2010 – March 2010
•API 510, 570 turnaround inspector for the HCU Hydrocracker unit, performing internal inspections on towers, exchangers, and heaters.

CATSI at Valero Refinery; Port Arthur, TX
January 2010 – February 2010
•API 510, 570 turnaround inspector for the HF Alky unit, performing internal inspections, on vessels and piping.

All Tech at Delek Refinery; Tyler, TX
July 2009 – January 2010
•Corrected Ultra-pipe reports, isometric drawings, equipment list and highlighted P&IDs for multiple units.
•API 510, 570 on-stream inspector for the DHT (Diesel Hydro Treater), performing external inspections, on towers, exchangers and piping.

Weld Spec at Chevron Lube Oils; Port Author, TX
April 2009 – June 2009
•API 653 inspector, UT performing internal inspection on multiple small storage tanks performing inspections, UT thickness reading, floor scans, and repair plans.

All Tech at Refineries ; Multiple
Januay 2009 – March 2009
•API 510/ CWI major repairs to two Coke drums (internal and external repairs were conducted)
•API 510 internal inspections in multiple units inspections included (Coke drums, towers, exchanges, and vessels)

TechCorr at Chevron Gas Plant; Table Rock, WY
August 2008 – September 2008
•Internal inspections in the entire plant Inspections included (Towers, exchanges, vessels, and tanks)

Kakivik at Sinclair Refinery; Sinclair, WY
May 2008 – August 2008
•Internal inspections in unit Inspections included (heaters, towers, exchanges, and drums)
•Performing PSSR (Per Startup Safety Review) of packages
•On-stream inspections plant wide (Vessels, exchangers, and tanks
•On site vender surveillance of major tank repairs. non compliance reports, witness hydrostatic test,

Gulf Coast Weld Spec at Numerous; Port Arthur, TX
August 2007 – August 2008
•Turn around and MI internal inspections in multiple units Inspections included (heaters, towers, exchanges storage tanks, and drums)
•On-stream inspections plant wide including (piping, vessels, exchangers, and tanks)

QCTL Inc (Quad Citys Testing Laboratory)at Numerous;
November 2004 – May 2007
•Lead Field Inspector API 510, 570, 653, CWI, PT, MT, UT Thickness, UT shear wave, UT flaw, ISO metric drawings AutoCAD, Ultrapipe, Turn around, on-stream, mechanical integrity set up,
•Cargill (Sweeteners, Ethanol, Chemical, Salt, Oils), GAF (Asphalt), 3M, Lyondell

Allied Services Group Inc at Numerous(Sold to QCTL)
May 2003 – October 2004
•API 510, 570, 653, CWI, PT, MT, UT Thickness, UT shear wave, UT flaw, ISO metric drawings AutoCAD, Ultrapipe, Turn around, on-stream, mechanical integrity set up,
•Cargill (Sweeteners, Ethanol, Salt, Fertilizer), Power plants, GAF (Asphalt)

PQNDT at Oxy Chemical; Muscle Shoals, AL
April 2003 – May 2003
•API 510, 570, 653, UT Thickness, on-stream inspections

Rig Blast at Numerous (Sold)
February 2003 – March 2003
•API 510, 570, UT Thickness, of towers and platforms off shore from rope access

Quality Control & Inspection at Memphis, TN (Closed)
March 1999 – January 2003
•PT, MT, RT, UTt, UTs, PMI, hardness testing, bend & tension test, on-stream inspections, turn around inspection, ISO drawings, updated AutoCAD drawings, update Ultra-Pipe reports
•Acquired API 510, 570, 653
•Piping, pipelines, vessels, towers, heaters, boilers, cranes, parts, aircraft components, and tanks
•Williams Refinery in Memphis, TN; DuPont in Millington, TN; Cargill in Memphis, TN; Terra Nitrogen in Blytheville, AR

Tri-State Testing at Memphis, TN (Closed)
December 1998 - March 1999
•PT, MT, RT, UTt, on-stream inspections, turn around inspection, ISO drawings
•Piping, vessels, towers, and tanks

Prior to December 1998
•Performed non-destructive testing on aircraft and aircraft components.

•Reliable with a great work ethic, driven, and technical.
•Experience in the API 510, 570, 571, 653, and referencing ASME codes
•Working knowledge of vessels, tower, tanks, piping, PSV, boiler, & heater inspections
•Experience in the application of non-destructive examination (UT, PT, RT, MT) techniques
•Experience setting up and correcting Mechanical integrity programs
•Good understanding of process equipment damage mechanisms commonly found in the chemical industry
•Strong spreadsheet and database skills including MS Word, MS Excel, MS Power Point