CSWIP 3.1,AWS CWI,NACE CIP LEVEL-2,ASNT LEVEL-2 in UT,RT,MPT,LPT,
ISO LEAD AUDITOR(ISO 9001-2008)

BE in MECHANICAL ENGINEERING. Bachelor in Engineer.

CURRICULUM VITAE
SUJIT PRAMANIK
Permanent Address:-
Vill-Akhua Bari, PO-Brajalalchak, PS-Chandipur,
District- Midnapore (east), West Bengal, India, Pin-721659
Email ID: SUJITPRAMANIK_81@YAHOO.CO.IN &
SUJITPRAMANIK@HOTMAIL.COM
Present contact no: +971-567112650(UAE- mobile)


Career Objective - To pursue a challenging carrier with a significant role in a
dynamic and progressive organization contributing towards the growth of
company and myself, using my analytical, technical, skills and leadership
qualities

Designation: Sr.QA/QC Engineer & Project Coordinator
UAE Driving License No:742540

Total working experience: 11+ years

Career Profile-Summary



Present Assignment
Company: Lindenberg-Emirates LLC.
Designation: Sr.QAQC-Engineer & Project Coordinator.
Project: water supply system for Fujairah distribution network Lot A&B.
Client: TRANSCO/ADWEA.
Location: Fujairah,UAE.


Previous Assignment

Intertek Moody International, Abu Dhabi, UAE.
Client: Abu Dhabi Gas Company (GASCO).
Designation: Multi Discipline Inspector (TPI).
Project: HABSHAN SULPHUR GRANULATION PLANT PROJECT (HSGP).
Location: HABSHAN, Abudhabi,UAE.
Previous Assignment
M/S VELOSI CERTIFICATION SERVICESS, Abu Dhabi,UAE.
Client: Abu Dhabi Company for Onshore Oil Operations (ADCO)
Designation: Welding & Coating Inspector
Project: Bab Gas compression Project.
Location: Habshan, Abudhabi,UAE.
Summary of Experience
Key Skills:

Present role as a project coordinator with M/S: Lindenberg:-

Assist the TPI and Source Inspection Quality Lead in the preparation of the
Procurement QC Surveillance Plans.
Assist the QA/QC team to review Vendor QA/QC Documentation, e.g. Quality
Plan, ITP, QA/QC Procedures, etc.
Review the technical requirements and specifications included in the PO to
ensure that Project inspection and testing requirements are met.
Participate meeting between the project QAQC, Construction and
subcontractor with the consultant/client weekly meetings, pre-award
manufacturing surveys and kick-off meetings before start the construction
work.
Prepare the action plan of previous minutes of meeting.
Prepare and/or review/validate the Quality Control Surveillance reports
resulting from shop surveillance activities
Review and approve Vendor's Inspection and Test Plans.
Prepare and issue TPI Work Assignment Packages.
Co-ordinate the implementation of TPI Work Assignment Packages.
Ensure regular co-ordination and QAQC team meetings are held with TPI
representatives.
Ensure inspection activities are closely monitored to ensure that inspection
schedule is maintained.
Conduct frequent surveillance visits to ensure that the inspection activities
are implemented in accordance with the approved Quality Plan and ITP's.

Coordinating with Contractor Inspection Team for carrying out the required
NDT as per the project scope of work
Reviewing Contractor NDT / Weld Maps for classification of structural items
Monitoring quality trends including supervision of interior inspection,
surveillance personnel and assist fabrication heads in the areas of quality
Overseeing Welding Procedure Qualification, Welder Qualification Tests and
Destructive Testing of Specimens
Administering Radiographic Interpretation and performing signing of NDT &
Release Inspection Reports further activities
Participating in the inspection & testing of all static equipment of process
plants and pipelined and provides analysis of equipment condition
Supervising Non-Destructive Testing of equipment and piping encompassing
review of preliminary interpretations carried out by NDT Technicians
Heading all construction activities and identifying deviations from the
specification and procedural requirements and assist in rectifying the
identified deficiencies
Getting approval of Welders’ Qualification & monitoring quality of major
maintenance works at Tank Farm during complete replacement of base
plates including welding, NDT.

Previous Project role:
Welding inspection of Pipe line, piping spools, Storage tank, Rail welding,
NDT Inspection like MT, PT, UTG and MFL Scanning, witnessing PWHT,
pressure test, coating & painting inspection, internal lining inspection of
pressure vessels and tanks, structural & mechanical installation.
Familiar with different type of coating systems like Zinc silicates, Zinc rich
epoxies, Siloxane epoxies paint(AMERCOAT), pure epoxies, Glass flake
epoxies, Glass flake Vinyl esters, Poly urethanes,3 Layer Polypropylene
(3LPP) heat shrink sleeves.

Mechanical and Structural inspection like installation, fabrication, erection,
welding, Alignment, verticality & Dimensional, torque tightening of nut & bolt
base on international stander and project DGS requirement.
Witnessing for WPS/PQR, Welder Qualification.
Witnessing the destructive testing of weldment.
Fabrication fit-up and welds visual inspection.
Radiographic Interpretation.
Witnessing PWHT and other NDT testing.
Final documentation review, test pack for pipe line, piping & storage tank.
Witnessed of Hydro static pressure test of pipeline, piping, storage tank and
pressure vassals.
Witness of blasting, painting inspection of structural, Piping, Storage tanks &
vessel.
Coating inspection in Pipelines and coating & lining inspections of storage
tank in Oil and gas new construction project.





Inspection of Above ground storage tanks
API650 & ASME Section.IX, fabrication, erection, fit-up, weld visual, peaking
& banding, plumbness, nozzle orientation, roundness, floating level, vacuum
box test of bottom plate lap & shell to annular plate corner joints, radiograph
interpretation, final walk down before hydro test, reviewing test pack,
settlement reading, hydro static testing inspection during and after water
filling, air leak test, nozzle pneumatic test, drying, internal lining & external
painting, coating inspection.

Inspection of pressure vessel & Heat Exchanger
Construction code ASME section-VIII, Division-1, welding code-ASME
Sec.IX, Shell preparation: plates marking & cutting, pressing (pre-pinching),
rolling, long seam fit-up and welding, radiography testing, cir-seam fit-up
and welding, radiography testing, nozzle opening marking, cutting, fit-up,
welding, final dimension, preparing test pack, reviewing and ensuring
requirement with GA drawing and hydro testing. Construction code for heat
exchanger: TEMA, welding code: ASME Sec.IX,
1) Shell preparation: plates marking & cutting, pressing (pre-pinching),
rolling, long seam fit-up & welding, RT, Cir-seam fit-up & welding.
2) Tube bundle includes tube sheet (stationery & floating), tubes, baffles, tie
rod, spacers, Tube sheet drilling, reaming, groove preparation and
chamfering.
3) Tubes installation between tube sheet and arranging tube projection and
tube expansion @ tube sheets and welding if require.
4) Tube bundle installation @ inside of shell, hydro test for shell side, tube
side, and floating head side and shell together.

Job responsibilities in painting:
Reviewing Inspection and Test Plan, Method Statement, Painting procedure,
Material Approval Request (MAR), Painting data sheet etc.

Witnessing Painting Procedure Quality Trial (PQT) and applicator qualification
test as per project specification.
Ensuring the painting system as per the painting systems and schedule of
the project specification.
Blasting and painting inspection in Piping, coating inspection in Pipelines
and coating & lining inspections in Storage tanks in Oil and gas new
construction as per approved ITP.
Inspection of Insulation activities on piping, vessels, tanks, equipment’s and
Knock out Drums etc. as per project specification.
Inspection of Fire proofing (Cafco PSK 101 & Fendolite MII) on steel
structures as per project inspection.

Painting inspection in Piping:
Inspection of surface preparation from abrasives like coal slag, Garnet etc.
prior to painting.
Ensure the environmental conditions like Relative humidity, Dew point and
Steel surface temperature etc.
Ensuring the surface profile as per project specification.
Ensuring the allowed salt contamination by Salt Contamination Meter as per
project specification.
Inspection of Inorganic Zinc silicate by MEK solvent rub test according to
International standards.
Inspection of mixing, thinning and application of painting as per Inspection
and Test Plan of the project.
Ensure the dry film thickness and over coating interval before subsequent
scheme painting.
Reviewing daily painting reports.

Coating inspection in Pipeline:
Inspection of surface preparation from abrasives like coal slag, Garnet etc.
prior to painting.
Ensure the environmental conditions like Relative humidity, Dew point and
Steel surface temperature etc.
Ensuring the surface profile as per project specification.
Ensuring the allowed salt contamination by Salt Contamination Meter as per
project specification.
Inspection of pre heating, post heating and application of Fusion Bond
Epoxy (FBE) on field joint by force curing.
Inspection of installation of Poly propylene (3LPP) Heat Shrink Sleeves of
Canusa-CPS (GTS-PP-Wrapid sleeve) on girth-welded joints of Main Oil
transfer lines & Production Transfer Line and CanusaTube on Gas injection
pipelines.
Inspection of the coating integrity by portable High voltage DC holiday
detector (SPY-Model 790).
Inspection of coating adhesion by peel strength test.
Inspection of the encapsulation integrity of the Cathodic Protected area by
portable High voltage DC holiday detector (SPY-Model 790).
Inspection of the coating integrity of mainline and field joint coating before
lowering the pipelines to the trench.
Reviewing daily coating reports, Holiday detection report, Adhesion test
report etc.

Coating and lining inspection in Storage tanks:
Inspection of surface preparation from abrasives like coal slag, Garnet etc.
prior to painting.
Ensure the environmental conditions like Relative humidity, Dew point and
Steel surface temperature etc.
Ensuring the surface profile as per project specification.
Ensuring the allowed salt contamination by Salt Contamination Meter as per
project specification.
Inspection of Inorganic Zinc silicate by MEK solvent rub test according to
International standards.
Inspection of mixing, thinning and application of painting as per Inspection
and Test Plan of the project.
Ensure the dry film thickness and over coating interval before subsequent
scheme painting.

Job responsibilities as a NDT Technician.

Radiography carried out by X-ray crawler (IPSI & ICM X-ray unit) on pipe
Line, station piping joint. Gamma radiography Ir192 source use on butt welds
of pressure vessels ,pipes ,boilers, pipe coils, shell & structural welding and
casting, film interpretation relating to pipe line Offshore structures, as per
API & ASME standards etc. Interpretation of Radiographs. Dye Penetrate
testing of: Different type of joints such as Butt joints, Fillet joints, ‘T’- joints,
Supporting Pads Root and final welding of piping joints also performed on
Forging, Castings, Weld edge preparations, Fittings by Visible Dye color
contrast & Fluorescent method. Magnetic particle testing of: Root and final
welding of piping joints, Vessel joints, Fillet joints, Supporting pads & Boxes
by Yoke (longitudinal magnetization) and Prod (circular magnetization) by Dry
powder and Wet.

Training Finish:
H2S SAFETY TRAINING IN
ADCO (ABUDHABI), CONFINED SPLACE ENTRY, SHUT-DOWN
TRAINING, JOB SAFETY ANALYSIS,FIRE WATCH JOB INSPECTION
REPORT,
SAFETY WATCH IN NATIONAL CHEVRON PHILIPS PROJECT,PETRO
KEMYA, ARAMCO.

Technical Skills Familiar with AWS, ASTM, ASME Section II, V, VIII, IX,
ASMEB31.1,B31.3,API-650, API-510,API-5L,API- 1104,AWS D1.1,1.2,1.6,
NACE,BGAS,DIN,SSPC. codes and standards. Conversant with, ISO 9001-
2000, ISO 14000 QM Systems. Well versed with P&ID, Isometric Drawings,
Knowledge of welding symbols and geometry. Occupational health and
safety assessment series 18000,

Educational Qualification
Passed BE- in Mechanical Engineering from Board of NIT/NCT Delhi.

Professional Qualification:
Passed CSWIP 3.1 Welding Inspector Level-2 (CR-74189)
Passed NACE CIP LEVEL-II (COATING & PAINTING INSPECTOR-22992)
Passed AWS /CWI—(CERTIFIED WELDING INSPECTOR)
Passed ISO 9001:2008 LEAD AUDITOR COURSE
Passed ASNT-Level-II in Radiography Interpretation, Liquid Penetrate
Testing, Magnetic Particle Testing, Ultrasonic Testing.
Software Skills
Windows, (MS OFFICE)Microsoft Word, Microsoft Excel.MS Power Point,
internet surfing.
Personal details
Sujit Pramanik,
S/O-Ajoy Pramanik

Date of Birth : 24/03/1981
Sex : Male
Nationality : Indian
Languages known : English, Hindi, and Bengali
Marital status : single
Passport Details
Passport number : K4922308
Place of issue : Kolkata
Date of issue : 14/08/2012
Date of expiry : 13/08/2022
Declaration
I hereby declare that those information have given by me are correct and true
to the best of my knowledge.It I were places in your esteemed concern. I will
discharge my duties with at most sincerity and to your full satisfaction


(SUJIT PRAMANIK) DATE:

I have more than 11 years’ experience in multi-discipline QA/QC inspection
field as QA/QC-Engineer and Project coordinator in various projects in client
and contractor representative.

I would like to describe in brief of my present role is Sr. QAQC-Engineer
and Project coordinator which is the huge role & my major responsibility is to
coordinate with our all QAQC engineers and client appointed consulting
engineers for daily activities and preplanning for next day work with
construction team. My activities are reviewing project specification,
inspection and test plan, method statement, attending daily and weekly
quality and construction meeting, reviewing drawing, execution of the job,
inspection, monitoring all project materials procurement, conducting third
party inspection(FAT) worldwide and shipment at the project site.

I am also dealing with FAT inspection in many countries like Germany, Spain,
Italy, Saudi Arabia, South Korea, china with our project approved TPI
agencies like Intertek moody, Bureau Veritas, TUV, and ensure all the testing
and certification has been successfully done at manufacturer location as per
contract specification requirement for all required materials like pipes, plates,
flanges, fittings, valves etc and submit all relevant documents to client
before release to shipment at the project site.

Please let me know if you have any opportunity currently available.
I have below certifications:

CSWIP3.1,
AWS-CWI,
NACE CIP LEVEL-2,
ASNT LEVEL-2 in UT,RT,MPT,LPT
ISO LEAD AUDITOR(ISO 9001:2008)
Looking forward to hearing from you soon!


Sujit Pramanik,
Sr. QA/QC Inspection Engineer(Multi-Discipline) & Project Co-ordinator
Lindenberg Emirates LLC,U.A.E

Email ID- sujitpramanik_81@yahoo.co.in
Contact- +971567112650