NAS 410 / SNT-TC-1A UT Level 2
NDT.org Member Since: 2016
Added: 3/4/2016
Last Updated: 3/4/2016
Last Updated: 3/4/2016
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
WA Washington
Country:
United States
Status:
I am willing to Travel.
Currently working but always looking.
I prefer permanent jobs.
Currently working but always looking.
I prefer permanent jobs.
Certifications
• NAS 410 and SNT-TC-1A Level 2 in UT
• Company certified NAS 410 and SNT-TC-1A Level 2 in UT
• Company certified using Manual Pulse Echo, Manual Through Transmission and Automated Pulse Echo methods
• Use of water immersion tank for Automated Pulse Echo system
• Company certified NAS 410 and SNT-TC-1A Level 2 in UT
• Company certified using Manual Pulse Echo, Manual Through Transmission and Automated Pulse Echo methods
• Use of water immersion tank for Automated Pulse Echo system
Education
Clover Park Technical College March 2013 - August 2014
Lakewood, WA
Associate of Applied Science in Material Science - Non Destructive Testing
Classroom and lab hours:
• 100 hours classroom Radiography inspection theory including 40 hour radiation safety course and 100 hours Radiography lab experience using casting films and CR
• 80 hours classroom Ultrasonic inspection theory and 140 hours Ultrasonic lab experience using longitudinal and shear wave inspections of weld plates
• 50 hours classroom Eddy Current inspection theory and 180 hours Eddy Current lab experience using semi-autonomous bolt hole inspection, sliding probe inspection, rivet inspection and conductivity testing
• 30 hours classroom Magnetic Particle inspection theory and 40 hours Magnetic Particle lab experience using a yoke and dry powder inspection
• 30 hours classroom Penetrant inspection theory and 40 hours Penetrant lab experience using Type II Method D inspection
Lakewood, WA
Associate of Applied Science in Material Science - Non Destructive Testing
Classroom and lab hours:
• 100 hours classroom Radiography inspection theory including 40 hour radiation safety course and 100 hours Radiography lab experience using casting films and CR
• 80 hours classroom Ultrasonic inspection theory and 140 hours Ultrasonic lab experience using longitudinal and shear wave inspections of weld plates
• 50 hours classroom Eddy Current inspection theory and 180 hours Eddy Current lab experience using semi-autonomous bolt hole inspection, sliding probe inspection, rivet inspection and conductivity testing
• 30 hours classroom Magnetic Particle inspection theory and 40 hours Magnetic Particle lab experience using a yoke and dry powder inspection
• 30 hours classroom Penetrant inspection theory and 40 hours Penetrant lab experience using Type II Method D inspection
Experience
• Experience testing composite material for aerospace
• Company certified Manual Pulse Echo (MPE), Manual Through Transmission (MTTU) and immersion Automated Pulse Echo (APEU) using A-Scan and C-Scan
• Use of water immersion tank for Automated Pulse Echo system
• Automated Through Transmission (ATTU) training using squirter systems
• 200 hours Penetrant experience
• Scan composite parts to customer specification including Boeing and Bell specifications
• Use and interpret both A-Scan and C-Scan displays
• Use of UT WIN software for both immersion tank APEU and squirter systems ATTU applications
• Accurate record keeping
• Phased Array classroom hours
• Penetrant training
• Ability to read and understand blueprints
• Meticulous attention to detail
• Analytical skills with the ability to problem solve and prioritize
• Excellent communication skills both verbal and written
• Adapt easily to change and learn new methods and procedures quickly
• Extensive knowledge of Microsoft Office Suite
• Company certified Manual Pulse Echo (MPE), Manual Through Transmission (MTTU) and immersion Automated Pulse Echo (APEU) using A-Scan and C-Scan
• Use of water immersion tank for Automated Pulse Echo system
• Automated Through Transmission (ATTU) training using squirter systems
• 200 hours Penetrant experience
• Scan composite parts to customer specification including Boeing and Bell specifications
• Use and interpret both A-Scan and C-Scan displays
• Use of UT WIN software for both immersion tank APEU and squirter systems ATTU applications
• Accurate record keeping
• Phased Array classroom hours
• Penetrant training
• Ability to read and understand blueprints
• Meticulous attention to detail
• Analytical skills with the ability to problem solve and prioritize
• Excellent communication skills both verbal and written
• Adapt easily to change and learn new methods and procedures quickly
• Extensive knowledge of Microsoft Office Suite
Comments
Qualifications
• NAS 410 and SNT-TC-1A Level 2 in UT
• Experience testing composite material for aerospace
• Company certified Manual Pulse Echo (MPE), Manual Through Transmission (MTTU) and immersion Automated Pulse Echo (APEU) using A-Scan and C-Scan
• Automated Through Transmission (ATTU) training using squirter systems
• 200 hours Penetrant experience
• Ability to read and understand blueprints
• Meticulous attention to detail
• Analytical skills with the ability to problem solve and prioritize
• Excellent communication skills both verbal and written
• Adapt easily to change and learn new methods and procedures quickly
• Extensive knowledge of Microsoft Office Suite
Work History
Mistras Kent, WA
UT Level 2 September 2014 to Present
• Company certified NAS 410 and SNT-TC-1A Level 2 in UT
• Company certified using Manual Pulse Echo, Manual Through Transmission and Automated Pulse Echo methods
• Use of water immersion tank for Automated Pulse Echo system
• Training on Automated Through Transmission using squirter systems
• Scan composite parts to customer specification including Boeing and Bell specifications
• Use and interpret both A-Scan and C-Scan displays
• Use of UT WIN software for both immersion tank APEU and squirter systems ATTU applications
• Blueprint reading
• Accurate record keeping
• Phased Array classroom hours
• Penetrant training
Skills Inc Auburn, WA
Penetrant Trainee February 2014 to April 2014
• 180 Certified Hours as a Penetrant Trainee
• Use of Type I Method A & C, Sensitivity level 3 penetrant
• Blueprint reading
• Masking and racking of parts for pre-clean
• Unmasking and sorting of parts for penetrant dip
• Dipping, washing, drying and application of developer for inspector
• Accurate record keeping
David Beebe
19101 78th Ave Ct E Puyallup, WA 98375 253-375-7789 dbeebe316@gmail.com
Comcast Fife, WA
Tech Product Sales Support Coordinator August 2003 to June 2012
• Compile reports pertaining to performance and quality assurance issues for review by management. Advises management, using written and/or verbal reports, in a timely and efficient manner
• Collating Reports into comprehensive format using Microsoft Office Suite
• Support and track entire sales process from initial survey request through installation, ensuring established time intervals are met
• Approve, reject, or coordinate Commercial Surveys. Prepare and report survey results
• Maintain accurate records and provide reporting support
• Responsible for meeting and exceeding quarterly business targets and goals
• Convey order information politely and efficiently to all pertinent workgroups across the enterprise
• Projects a professional business manner and operates with a high degree of integrity
• Review customer orders to ensure quality assurance standards for accuracy
Education
Clover Park Technical College March 2013 - August 2014
Lakewood, WA
Associate of Applied Science in Material Science - Non Destructive Testing
Classroom and lab hours:
• 100 hours classroom Radiography inspection theory including 40 hour radiation safety course and 100 hours Radiography lab experience using casting films and CR
• 80 hours classroom Ultrasonic inspection theory and 140 hours Ultrasonic lab experience using longitudinal and shear wave inspections of weld plates
• 50 hours classroom Eddy Current inspection theory and 180 hours Eddy Current lab experience using semi-autonomous bolt hole inspection, sliding probe inspection, rivet inspection and conductivity testing
• 30 hours classroom Magnetic Particle inspection theory and 40 hours Magnetic Particle lab experience using a yoke and dry powder inspection
• 30 hours classroom Penetrant inspection theory and 40 hours Penetrant lab experience using Type II Method D inspection
Highline Community College September 1992 - December 1994
Des Moines, WA
Associate of Arts Degree in General Studies
• NAS 410 and SNT-TC-1A Level 2 in UT
• Experience testing composite material for aerospace
• Company certified Manual Pulse Echo (MPE), Manual Through Transmission (MTTU) and immersion Automated Pulse Echo (APEU) using A-Scan and C-Scan
• Automated Through Transmission (ATTU) training using squirter systems
• 200 hours Penetrant experience
• Ability to read and understand blueprints
• Meticulous attention to detail
• Analytical skills with the ability to problem solve and prioritize
• Excellent communication skills both verbal and written
• Adapt easily to change and learn new methods and procedures quickly
• Extensive knowledge of Microsoft Office Suite
Work History
Mistras Kent, WA
UT Level 2 September 2014 to Present
• Company certified NAS 410 and SNT-TC-1A Level 2 in UT
• Company certified using Manual Pulse Echo, Manual Through Transmission and Automated Pulse Echo methods
• Use of water immersion tank for Automated Pulse Echo system
• Training on Automated Through Transmission using squirter systems
• Scan composite parts to customer specification including Boeing and Bell specifications
• Use and interpret both A-Scan and C-Scan displays
• Use of UT WIN software for both immersion tank APEU and squirter systems ATTU applications
• Blueprint reading
• Accurate record keeping
• Phased Array classroom hours
• Penetrant training
Skills Inc Auburn, WA
Penetrant Trainee February 2014 to April 2014
• 180 Certified Hours as a Penetrant Trainee
• Use of Type I Method A & C, Sensitivity level 3 penetrant
• Blueprint reading
• Masking and racking of parts for pre-clean
• Unmasking and sorting of parts for penetrant dip
• Dipping, washing, drying and application of developer for inspector
• Accurate record keeping
David Beebe
19101 78th Ave Ct E Puyallup, WA 98375 253-375-7789 dbeebe316@gmail.com
Comcast Fife, WA
Tech Product Sales Support Coordinator August 2003 to June 2012
• Compile reports pertaining to performance and quality assurance issues for review by management. Advises management, using written and/or verbal reports, in a timely and efficient manner
• Collating Reports into comprehensive format using Microsoft Office Suite
• Support and track entire sales process from initial survey request through installation, ensuring established time intervals are met
• Approve, reject, or coordinate Commercial Surveys. Prepare and report survey results
• Maintain accurate records and provide reporting support
• Responsible for meeting and exceeding quarterly business targets and goals
• Convey order information politely and efficiently to all pertinent workgroups across the enterprise
• Projects a professional business manner and operates with a high degree of integrity
• Review customer orders to ensure quality assurance standards for accuracy
Education
Clover Park Technical College March 2013 - August 2014
Lakewood, WA
Associate of Applied Science in Material Science - Non Destructive Testing
Classroom and lab hours:
• 100 hours classroom Radiography inspection theory including 40 hour radiation safety course and 100 hours Radiography lab experience using casting films and CR
• 80 hours classroom Ultrasonic inspection theory and 140 hours Ultrasonic lab experience using longitudinal and shear wave inspections of weld plates
• 50 hours classroom Eddy Current inspection theory and 180 hours Eddy Current lab experience using semi-autonomous bolt hole inspection, sliding probe inspection, rivet inspection and conductivity testing
• 30 hours classroom Magnetic Particle inspection theory and 40 hours Magnetic Particle lab experience using a yoke and dry powder inspection
• 30 hours classroom Penetrant inspection theory and 40 hours Penetrant lab experience using Type II Method D inspection
Highline Community College September 1992 - December 1994
Des Moines, WA
Associate of Arts Degree in General Studies
